FBT JOLLY J12A Active Speaker 2-way 400W

555.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]

 

Read more

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed ‘from the ground up’ in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

 

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Code: 37714
Configuration: 2 way
Built-in amplifier LF/HF: 350/100 W RMS
Built-in amplifier peak LF/HF: 700/200 W
Frequency response: 50Hz – 20KHz -6dB
Low Frequency woofer: 12 – 2 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 124/128 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2 KHz
AC Power requirements: 400 VA
Input connector: XLR – jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 410x663x387 – 16.14×26.10×15.23 mm/inch
Net Weight: 13.7 / 30.2 Kg/lb
Transport Dimension (WxHxD): 495x740x475 – 19.48×29.13×18.70 mm/inch
Transport Weight: 16.8 / 37.03 Kg/lb
Weight 17.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT JOLLY J12A Active Speaker 2-way 400W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT JOLLY J12A Active Speaker 2-way 400W removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeELECTRO VOICE ELX200-12P Active 12inch speaker 1200W Class D Amp removeDAS AUDIO Avant 12A ACTIVE SPEAKER 12'' 600W removeLD Systems LDATOP12 Block X 12" Mid High Unit Active Speaker 450W RMS removeMACKIE HD1221 2-Way High Definition Powered Loudspeaker 12'' 600W remove
NameFBT JOLLY J12A Active Speaker 2-way 400W removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeELECTRO VOICE ELX200-12P Active 12inch speaker 1200W Class D Amp removeDAS AUDIO Avant 12A ACTIVE SPEAKER 12'' 600W removeLD Systems LDATOP12 Block X 12" Mid High Unit Active Speaker 450W RMS removeMACKIE HD1221 2-Way High Definition Powered Loudspeaker 12'' 600W remove
Image
SKUFBT00052VP 7212/95DPCE010702AVANT12ALDATOP12149.038
Rating
Price555.00 incl. GR VAT 4,190.00 incl. GR VAT 777.00 incl. GR VAT1,853.79 incl. GR VAT 962.29 incl. GR VAT1,259.67 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

 

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Code: 37714
Configuration: 2 way
Built-in amplifier LF/HF: 350/100 W RMS
Built-in amplifier peak LF/HF: 700/200 W
Frequency response: 50Hz - 20KHz -6dB
Low Frequency woofer: 12 - 2 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 124/128 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2 KHz
AC Power requirements: 400 VA
Input connector: XLR - jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 410x663x387 - 16.14x26.10x15.23 mm/inch
Net Weight: 13.7 / 30.2 Kg/lb
Transport Dimension (WxHxD): 495x740x475 - 19.48x29.13x18.70 mm/inch
Transport Weight: 16.8 / 37.03 Kg/lb


Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)

  • EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
  • QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
  • High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
  • EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
  • Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.
ELX200-12P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (12-inch EVS-12M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting. The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
Available Color Black
Connector Type (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR
Coverage (Nominal -6 dB) H 90°
Coverage (Nominal -6 dB) V 60°
Crossover Frequency 1700Hz
Depth 344mm (13.5“)
Enclosure Material Polypropylene Composite
Family ELX200
Frequency Range (-10 dB) 51 Hz – 20 kHz
Frequency Response (-3 dB) 57 Hz – 16 kHz
Grille 18 AWG steel with powdercoat
Height 629mm (24.8“)
HF Transducer DH-1C 1-inch titanium compression driver
LF Transducer EVS-12M 300 mm (12 in)
Max. SPL/1m (calc) 130dB
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.8A
Power Rating 1200W
Powered or Passive Powered
Shipping Weight 17.7kg (39 lbs)
Speaker Type Full-Range
Suspension (3) M10 suspension points
Weight Net 15.6kg (34.4 lbs)
Width 363mm (14.3“)
Woofer Size 12inch

Features

- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points

The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of  transportation and road worthiness.

The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.

The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?

The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.

 

Technical Data

Nominal LF Amplifier Power500 W
Nominal HF Amplifier Power100 W
Frequency Range (-10 dB)60 Hz-20 kHz (EQ Main)
Rated Peak SPL at 1 m133 dB
Dispersion80ºH x 50ºV rotatable horn
Enclosure MaterialPlywood
Color/FinishBlack/Paint
ConnectorsInput: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC
AC Requirements115 V, 50/60 Hz
230 V, 50/60 Hz
Current Draw (1/3 power @ 230 V)1.7 A
Dimensions (H x W x D)71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in
Weight22 kg (48 lb)

 

The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.

Specifications LD Block X 12" Topteil Active:
  • Model Name: LDATOP12
  • Type: Bassreflex
  • Components:
    • Woofer: 12" Custom Made
    • Compression Driver: 1" Custom Made
    • Amplification: Class A / B (Bi-Amp)
  • Dispersion: 60° x 40°
  • Power (RMS): 350 W + 100 W
  • Frequency Range: 80 Hz - 20 kHz
  • SPL (1 W/ 1 m): 101 dB
  • Max SPL: 128 dB
  • Protection: Limiter, Thermal, DC, Short circuit, HF
  • Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
  • Indicators: Power, Limiter, Signal, Protect
  • Connectors:
    • Input: Line: XLR + Jack 6,3mm (Combo)
    • Output: Line: XLR
  • Power Supply: Transformer
  • Cabinet Material: 15 mm Plywood
  • Cabinet Surface: Painting
  • Dimensions (W x H x D): 450 x 500 x 520 mm
  • Features: Ergonomic milled handles

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     100W Class D
Frequency Range     55Hz-20kHz (-10dB)
Crossover Frequency     1.5kHz
Maximum Peak SPL     124dB
Horizontal Coverage Angle     90 Degrees
Vertical Coverage Angle     50 Degrees
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly, Wedge
Inputs     1 x XLR
Outputs     1 x XLR
Height     24“
Width     15.2“
Depth     15“
Weight     50 lbs.

Weight17.00 kg21.30 kg18.00 kg22.00 kg34.50 kg22.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.00 kg
Weight 21.30 kg
Weight 18.00 kg
Weight 22.00 kg
Weight 34.50 kg
Weight 22.60 kg