Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code: |
37687 / 37905 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
80/40 W RMS |
Built-in amplifier peak LF/HF: |
160/80 W |
Frequency response: |
80Hz - 20KHz -6dB |
Low Frequency woofer: |
5 - 1 coil inch |
High Frequency driver: |
1 dome - 0.75 coil inch |
Maximum SPL cont/peak: |
113 / 117 dB |
Dispersion: |
90° x 90° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
3.5 KHz |
AC Power requirements: |
75 VA |
Input connector: |
XLR combo with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
170x275x180 - 6.69x10.82x7.08 mm/inch |
Net Weight: |
3.4 / 7.49 Kg/lb |
Transport Dimension (WxHxD): |
240x345x235 - 9.44x13.58x9.25 mm/inch |
Transport Weight: |
4.2 / 9.25 Kg/lb |
|
LD Systems Roadboy 65 HS B6
Portable PA Speaker with Headset
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, provides an impressive sound pressure level of 110 dB max. Despite its small format, this mobile all-in-one speaker box provides great audibility and is equipped with unique features.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
6.5 "
Woofer type
Broadband speaker
Frequency response
80 - 15.000 Hz
Protection circuits
short circuit
Controls
Bass , Line Gain , Master , Mic Gain , Power , Treble , Voice priority on / off
Indicators
Charge/battery status , Power
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line input connectors
RCA
Line output connectors
RCA
Speaker output connections
6.3 mm Jack
Transmission frequency range
655 - 679 MHz
Operating voltage
External 100- 240 V AC switch mode power supply
Operating voltage
15 - 18 V DC, 3 A
Rechargeable batteries
12 V / 2.6 AH
Cabinet material
polypropylene
Cabinet construction
vented
Other features
16 mm stand mount , transport handle
|
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code: |
37687 / 37905 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
80/40 W RMS |
Built-in amplifier peak LF/HF: |
160/80 W |
Frequency response: |
80Hz - 20KHz -6dB |
Low Frequency woofer: |
5 - 1 coil inch |
High Frequency driver: |
1 dome - 0.75 coil inch |
Maximum SPL cont/peak: |
113 / 117 dB |
Dispersion: |
90° x 90° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
3.5 KHz |
AC Power requirements: |
75 VA |
Input connector: |
XLR combo with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
170x275x180 - 6.69x10.82x7.08 mm/inch |
Net Weight: |
3.4 / 7.49 Kg/lb |
Transport Dimension (WxHxD): |
240x345x235 - 9.44x13.58x9.25 mm/inch |
Transport Weight: |
4.2 / 9.25 Kg/lb |
|
The bi-amplified Genelec 4040A is a powerful but compact two way active loudspeaker designed for fixed installations.
As an active loudspeaker, it contains drivers, power amplifiers, active crossover filters and protection circuitry. This integrated design makes installations easier and more efficient as separate power amplifiers are not needed.
The MDETM (Minimum Diffraction EnclosureTM) loudspeaker enclosure is made of die-cast aluminium and shaped to reduce edge diffraction.
Combined with the advanced Directivity Control WaveguideTM (DCWTM), this design provides excellent frequency balance in difficult acoustic environments.
The 4040A is equipped with practical tone controls for calibrating the loudspeakers according to their environment.
Automatic protection circuits for amplifiers and loudspeaker drivers combined with the rugged metal enclosure ensure reliability for years to come.
The versatile mounting features include integrated rear support points for wall and floor stands plus a further M10 thread for mounting on the enclosure base.
| 109 dB | | 55 Hz - 20 kHz (± 3 dB)
55 Hz - 20 kHz (-3 dB) | | 2.5 kHz | | Bass 6.5" + Treble ¾“
metal dome + DCWTM | | Bass 120 W + Treble 120 W | | H x W x D 350 x 237 x 223 mm | | 9.9 Kg (22 lb) | | 1 x balanced Phoenix connector |
| LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
MIXER
Mic inputs
6.3 mm jack, XLR
Controls for Mic Inputs
DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level
Input Impedance Mic Inputs
14 kOhm
Input Sensitivity Mic Input
70 mV
Line input connectors
2 x RCA
Controls Line Inputs
DFX Send, EQ Hi, EQ Low, level
Input Impedance Line Inputs
4.4 kOhm
Input Sensitivity Line Inputs
- 5 dBu
Hi-Z input connectors
6.3 mm jack
Input Impedance Hi-Z Input Connectors
100 kOhm
Connector Type Monitor Line Output
2 x RCA
Controls for Monitor Line Output
Monitor Volume
Max Output Level Line Output Monitor
28 dBu
Connector Type Record Output
2 x RCA
Increased power main output (at 4 ohm)
70 W
DSP Digital Effect
DSP Number of Programs
16
DSP Controls
DFX Return, Mute switch
DSP Display Elements
Peak LED
Main Section
Main section controls
EQ Hi, EQ Low, EQ Mid, Master Volume, Phantom Power, voltage selector switch
Main section indicators
4-segment Level Meter, power LED
Mains connector
IEC socket
Operating voltage
transformer
Operating voltage
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Cabinet
Cabinet construction
Bass Reflex
Cabinet surface
texture paint
Other features
2 x 16 mm pole mount socket, rubber feet
| |
Reviews
There are no reviews yet.