| Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
| Code: |
37687 / 37905 White |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
80/40 W RMS |
| Built-in amplifier peak LF/HF: |
160/80 W |
| Frequency response: |
80Hz - 20KHz -6dB |
| Low Frequency woofer: |
5 - 1 coil inch |
| High Frequency driver: |
1 dome - 0.75 coil inch |
| Maximum SPL cont/peak: |
113 / 117 dB |
| Dispersion: |
90° x 90° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
3.5 KHz |
| AC Power requirements: |
75 VA |
| Input connector: |
XLR combo with loop |
| Power cord: |
5 / 16.4 m/ft |
| Net Dimension (WxHxD): |
170x275x180 - 6.69x10.82x7.08 mm/inch |
| Net Weight: |
3.4 / 7.49 Kg/lb |
| Transport Dimension (WxHxD): |
240x345x235 - 9.44x13.58x9.25 mm/inch |
| Transport Weight: |
4.2 / 9.25 Kg/lb |
| LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
MIXER
Mic inputs
6.3 mm jack, XLR
Controls for Mic Inputs
DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level
Input Impedance Mic Inputs
14 kOhm
Input Sensitivity Mic Input
70 mV
Line input connectors
2 x RCA
Controls Line Inputs
DFX Send, EQ Hi, EQ Low, level
Input Impedance Line Inputs
4.4 kOhm
Input Sensitivity Line Inputs
- 5 dBu
Hi-Z input connectors
6.3 mm jack
Input Impedance Hi-Z Input Connectors
100 kOhm
Connector Type Monitor Line Output
2 x RCA
Controls for Monitor Line Output
Monitor Volume
Max Output Level Line Output Monitor
28 dBu
Connector Type Record Output
2 x RCA
Increased power main output (at 4 ohm)
70 W
DSP Digital Effect
DSP Number of Programs
16
DSP Controls
DFX Return, Mute switch
DSP Display Elements
Peak LED
Main Section
Main section controls
EQ Hi, EQ Low, EQ Mid, Master Volume, Phantom Power, voltage selector switch
Main section indicators
4-segment Level Meter, power LED
Mains connector
IEC socket
Operating voltage
transformer
Operating voltage
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Cabinet
Cabinet construction
Bass Reflex
Cabinet surface
texture paint
Other features
2 x 16 mm pole mount socket, rubber feet
| SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player ...). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards.
These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured. | SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player ...). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards.
These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured. |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
| SDQ5PIR is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5PIR set can be controlled from the included infrared remote control, via serial commands or via the Apart wall control panels (ACP, ACPL or ACPR) which allow control of power and volume. ACPL and ACPR also allow the addition of external audio inputs. Teachers, lecturers or anyone who is giving a presentation can stop worrying about audio system problems and stay focused on their presentation. |
Reviews
There are no reviews yet.