The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed ‘from the ground up’ in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz – 20KHz -6dB
Low Frequency woofer:
5 – 1 coil inch
High Frequency driver:
1 dome – 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 – 6.69×10.82×7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 – 9.44×13.58×9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “FBT JOLLY J5AW Active Speaker 2-way 120W” Cancel reply
Class D amplification with 2 x 280 watts peak power
6.5” custom woofer and 1” HF driver
Integrated 4-channel mixer
24-bit DSP with 16 FX Presets
Slave output for combination with LD MIX 6 G3 passive loudspeaker
Bass reflex enclosure for powerful, punchy bass
Dual 16 mm pole mounts for horizontal or vertical orientation
Content
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz - 20KHz -6dB
Low Frequency woofer:
5 - 1 coil inch
High Frequency driver:
1 dome - 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 - 6.69x10.82x7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 - 9.44x13.58x9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
The very compact 4030B is a powerful bi-amplified speaker system ideal for small to mid-sized commercial installations such as clubs, bars, board rooms, museums, theaters, etc.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
The MDETM (Minimum Diffraction EnclosureTM) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.
The 4030B also features the advanced Genelec Directivity Control WaveguideTM (DCWTM), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.
100 dB
58 Hz - 20 kHz (± 2.5 dB)
55 Hz - 20 kHz (-3 dB)
3.0 kHz
Bass 5" + Treble 3/4“
metal dome + DCWTM
Bass 40 W + Treble 40 W
H x W x D 285 x 189 x 178 mm
5.5 Kg (12.1 lb)
1 x balanced Phoenix connector
LD Systems MIX 6 A G3 Active 2-Way Loudspeaker with Integrated 4-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 6 A G3 integrates a 4-channel mixer and Class D amplification with 2 x 280 watts peak power. The compact bass reflex loudspeaker features a 6.5" custom woofer and 1" HF driver complement, 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels and a stereo line channel with 2-band EQ each plus switchable hi-Z input and 15 V phantom power. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering, an adjustable monitor and RCA recording outputs. In addition, the LD MIX 62 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A 4 ohm slave output allows powering the passive LD MIX 6 G3 for a dual speaker setup.
The rigid MDF enclosure features two 16 mm pole mounts for horizontal or vertical orientation. On its own or in tandem with the passive unit, the LD MIX 62 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Type
active
Woofer dimensions
6.5 "
Woofer size
165.1 mm
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Dispersion (H x V)
80 x 70 °
Frequency response
80 - 20.000 Hz
Amplifier
Class D
Amplifier output (RMS)
2x70 W
Amplifier output (peak)
2x280 W
Max. SPL
122 dB
Protection circuits
ICL (Intelligent Clip Limiting), over-current, overload, short circuit, thermal overload
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
Power consumption
180 W
Cabinet
Cabinet construction
Bass Reflex
Cabinet material
MDF
Cabinet surface
texture paint
Cabinet colour
Black
Width
214 mm
Height
323 mm
Depth
221 mm
Weight
7 kg
Other features
2 x 16 mm pole mount socket, rubber feet
The very compact 4030B is a powerful bi-amplified speaker system ideal for small to mid-sized commercial installations such as clubs, bars, board rooms, museums, theaters, etc.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
The MDETM (Minimum Diffraction EnclosureTM) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.
The 4030B also features the advanced Genelec Directivity Control WaveguideTM (DCWTM), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.
100 dB
58 Hz - 20 kHz (± 2.5 dB)
55 Hz - 20 kHz (-3 dB)
3.0 kHz
Bass 5" + Treble 3/4“
metal dome + DCWTM
Bass 40 W + Treble 40 W
H x W x D 285 x 189 x 178 mm
5.5 Kg (12.1 lb)
1 x balanced Phoenix connector
LD Systems Roadboy 65 HS B6 Portable PA Speaker with Headset
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, provides an impressive sound pressure level of 110 dB max. Despite its small format, this mobile all-in-one speaker box provides great audibility and is equipped with unique features.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
6.5 "
Woofer Size
165.1 mm
Woofer type
Broadband speaker
Woofer magnet
Ferrite
Woofer brand
Custom-made
Amplifier
Class D
RMS
25 W
Peak power
100 W
Frequency response
80 - 15.000 Hz
SPL (1W/1m)
93 dB
Max. SPL
110 dB
Protection circuits
short circuit
Controls
Bass , Line Gain , Master , Mic Gain , Power , Treble , Voice priority on / off
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
2
Line input connectors
RCA
Mic inputs
1
Mic inputs
6.3 mm Jack
Line outputs
2
Line output connectors
RCA
Loudspeaker outputs
1
Speaker output connections
6.3 mm Jack
Transmission frequency range
655 - 679 MHz
Operating voltage
External 100- 240 V AC switch mode power supply
Operating voltage
15 - 18 V DC, 3 A
Rechargeable batteries
12 V / 2.6 AH
Cabinet material
polypropylene
Cabinet construction
vented
Width
200 mm
Height
300 mm
Depth
230 mm
Weight
6 kg
Other features
16 mm stand mount , transport handle
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, pro-vides an impressive sound pressure level (> 105 dB) and audibility, and is equipped with features unique for its size.
Standard Features :
CD/MP3 player with USB connection and volume control
1 x UHF PLL 16CHN diversity wireless unit with dynamic handheld (WS1601MD)
1 x MIC in / AUX in /AUX out
2 band equalisation
Voice priority (talkover) function
DC in (12-15 V 4A)
90-240 V AC switching power supply
Rechargeable battery type 12 V / 2.7 AH (up to 4 hours lifetime)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.