80W – 117dB SPL Applications Band P.A. Personal monitor Small theatres Auditoriums Piano bar DJ Stage monitor Conference rooms Fixed installations in live clubs Pubs Gyms The FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black or white finish the FBT J5 series speakers modern cabinet appearance […]
The FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction.
Available in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.
With the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield
monitor applications, live sound and as a studio monitor.
The FBT J5 is of two way design incorporating an 5″ low frequency woofer
and 1″ HF custom compression driver. Cabinnet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover
is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz – 20kHz the FBT J5 speakers provide high fidelity sound for both
speech and music applications with a maximum SPL of 117dB.
A front face steel grille protects the speaker from external damage.
Ideal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be
utilized per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 2 Ohm. The two
M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on
walls or ceiling.
For portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for
vertical mounting. Rear panel connections feature both a female 1/4″ input jack and push pin terminal connectors which are internally
connected in parallel providing various wiring options for the installer.
2-way passive sound reinforcement system
Polypropylene enclosure
1 x 5″ custom woofer
1 x 1″ neodymium silk dome tweeter
80W RMS recommended amplifier
40W long term power
160W short term power IEC 268-5
2 x M6 suspension points
Internal passive crossover filter
Input panel with jack and terminal connector
Available in white color
Completely manufactured in Italy
Code:
37830 / 37907 White
Configuration:
2 Way
Frequency response:
90Hz – 20kHz
Low Frequency woofer:
5″ with 1″ VC
High Frequency driver:
1″ Dome Tweeter
Maximum SPL cont/peak:
114/117 dB
Dispersion:
90 x 90 (HxV)
Input impedance:
16ohm
Crossover Frequency:
3.5kHz
Input connector:
Jack + Terminal
Net Dimension (WxHxD):
170 x 275 x 180mm / 6.69 x 10.82 x 7.08in
Net Weight:
3.4kg / 7.49lb
Transport Dimension (WxHxD):
240 x 345 x 235mm / 9.44 x 13.58 x 9.25in
Transport Weight:
4.2kg / 9.25lb
Weight
4.50 kg
Reviews
There are no reviews yet.
Be the first to review “FBT JOLLY J5W Passive speaker 2 way 80W” Cancel reply
The FBT J5 series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction.
Available in black or white finish the FBT J5 series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor.
With the use of optional accessories the FBT J5 speakers can be mounted on mic stands for many nearfield
monitor applications, live sound and as a studio monitor.
The FBT J5 is of two way design incorporating an 5" low frequency woofer
and 1" HF custom compression driver. Cabinnet dispersion is 90°H x 90°V allowing for wide pattern coverage. The internal crossover
is at a fixed frequency of 3.5kHz. With a frequency range of 90Hz - 20kHz the FBT J5 speakers provide high fidelity sound for both
speech and music applications with a maximum SPL of 117dB.
A front face steel grille protects the speaker from external damage.
Ideal for small fixed installations the FBT J5 speaker system have an impedance of 16 Ohm allowing four FBT J5 speakers to be
utilized per channel, for a total of eight J5 speakers when used with a stereo power amplifier capable of operating at 2 Ohm. The two
M6 fly points built into the cabinets along with the optional mounting brackets allow the FBT J5 speakers to be surface mounted on
walls or ceiling.
For portable or fixed use the FBT J5 speakers can be mounted on mic stands by using the optional adapters for
vertical mounting. Rear panel connections feature both a female 1/4" input jack and push pin terminal connectors which are internally
connected in parallel providing various wiring options for the installer.
2-way passive sound reinforcement system
Polypropylene enclosure
1 x 5" custom woofer
1 x 1" neodymium silk dome tweeter
80W RMS recommended amplifier
40W long term power
160W short term power IEC 268-5
2 x M6 suspension points
Internal passive crossover filter
Input panel with jack and terminal connector
Available in white color
Completely manufactured in Italy
Code:
37830 / 37907 White
Configuration:
2 Way
Frequency response:
90Hz - 20kHz
Low Frequency woofer:
5" with 1" VC
High Frequency driver:
1" Dome Tweeter
Maximum SPL cont/peak:
114/117 dB
Dispersion:
90 x 90 (HxV)
Input impedance:
16ohm
Crossover Frequency:
3.5kHz
Input connector:
Jack + Terminal
Net Dimension (WxHxD):
170 x 275 x 180mm / 6.69 x 10.82 x 7.08in
Net Weight:
3.4kg / 7.49lb
Transport Dimension (WxHxD):
240 x 345 x 235mm / 9.44 x 13.58 x 9.25in
Transport Weight:
4.2kg / 9.25lb
Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
High 30W rated input power and 91 dB output sound pressure level.
The AC16 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" exit compression driver integrated into a 90° x 90° PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area. The AC16 utilizes a 6.5" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The AC16 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Exit Compression Driver with 90° x 90° Coverage PT™waveguide.
6.5" (165 mm) LF transducer
Ultra compact enclosure
400W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:
Frequency Range (-10 dB): 55 Hz -20 kHz
Frequency Response (±3 dB): 65 Hz -18 kHz
Power Rating:
200W Cont. Pink Noise
400W Program
800W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 15" H x 7.8" W x 8.9" D (381 x 199.4 x 226.1mm)
Weight: 15.8 lbs. (7.2 kg)
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion. 
Reviews
There are no reviews yet.