Content | The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
• NL-4 Neutrik™ Speakon input and link connectors
•Avaiable in white colour J 8W
Code: |
37931 / 37908 White |
Configuration: |
2 way |
Recommended amplifier: |
160 W RMS |
Long Term power: |
80 W |
Short term power: |
320 W |
Nominal impedance: |
8 ohm |
Frequency response: |
65Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High frequency driver: |
1-1 coil inch |
Sensitivity (@1W/1m): |
96.5 dB |
Maximum SPL cont/peak: |
118.5 / 121.5 dB |
Dispersion: |
90°x60° HxV |
Crossover Frequency: |
2.5 KHz |
Recommended HP filter: |
55Hz - 24dboct |
Input connector: |
2 x speakon N4 in & thru |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
6.6 / 14.55 kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
8.1 / 17.85 kg/lb |
|
The Monitor 88 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidelity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency.
The low-frequency 8“driver ʼs low-mass, carbon fiber diaphragm remains extremely rigid at high power levels,producing a more linear response and lower distortion.
The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer.
The horn is driven by a Ferrofluid® cooled,1“titanium dome tweeter.
All components are housed in a vented enclosure formed from semiexpanded polystyrene foam.
The speaker system is available in black (Monitor 88)or white (Monitor 88W).
Features |
---|
High quality music reproduction | Transducers LF 8" - HF 1" constant directivity tweeter | Built-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65Hz | Lightweight, UV/weather resistant, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion | Integrated mounting points for use with optional mounting hardware |
Acoustical Specifications |
---|
Type Of Speaker: | Two-way | | Frequency Response: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 120 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 80° | | Power Handling: | 300 Watt RMS | | System Sensitivity: | 91 dB | | Impedance: | 8 Ω | | Crossover frequencies: | 3 Hz | |
TRANSDUCERS |
---|
Speaker: | 8“ | | Tweeter: | 1“ | |
INPUT SECTION |
---|
Input connector: | Push type terminal | |
CABINET |
---|
Hardware: | Body in self-extinguishing | | Colour: | White / Black | | Grille: | Steel | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 430 / 16.92 | | Width: | 290 / 11.41 | | Depth: | 260 / 10.23 | | Net Weight: | 15 / 33.06 | |
SHIPPING INFORMATION |
---|
Package height: | 535 / 21.06 | | Package width: | 370 / 14.56 | | Package depth: | 355 / 13.97 | | Shipping Weight: | 16.5 / 36.37 |
| 200 watt 8" two-way speaker system with EV DH2005 hi-frequencye compression driver. 2 NL4 connectors. 90x50 coverage pattern with rotatable waveguide. Includes integrated pole mount, carrying slot and rubber feet. Black high impact polymer cabinet.
The Electro-Voice ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement.
The high-tech enclosure is lightweight and extremely durable. The enclosure geometery has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response withtout vent noise. The ZX1's long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability.
A sophisticated crossover network integrates it with the EV DH2005, a 1" exit true compression driver with extended frequency response and high output capability. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
ALSO AVAILABLE IN WHITE |
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.
|
The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
50The AC18/26 is a compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" exit compression driver integrated into a 120° x 60° rotatable PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area. The AC18/26 utilizes a 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The AC18/26 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Exit Compression Driver with 120° x 60° Coverage PT™waveguide.
8" (205 mm) LF transducer
Compact enclosure
500W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:
Frequency Range (-10 dB): 47 Hz -20 kHz
Frequency Response (±3 dB):
f10, 52 Hz - 20 kHz
f3, 63 Hz – 19 kHz
Power Rating:
250W Cont. Pink Noise
500W Program
1000W Peak
Impedance: 8 Ohms
Coverage Pattern: 120° x 60°
Dimensions: 18.5" H x 9.4" W x 10" D (469.9 x 237.5 x 254mm)
Weight: 28.2 lbs. (12.8 kg)
|
Reviews
There are no reviews yet.