Content | New J series
More technology for improved performance and quality value for money
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
NL-4 Neutrik™ Speakon input and link connectors
Code: |
37714 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
55Hz - 20HHz -6dB |
Low Frequency woofer: |
12 - 2 coil inch |
High frequency driver: |
1 - 1 coil inch |
Sensitivity (@1W/1m): |
98 dB |
Maximum SPL cont/peak: |
123 / 127 dB |
Dispersion: |
90°x60° HxV |
Crossover Frequency: |
2 KHz |
Recommended HP filter: |
45hz - 24dboct |
Input connector: |
2 x speakon NL4 in & Thru |
Net Dimension (WxHxD): |
410x663x387 - 16.14x26.10x15.23 mm/inch |
Net Weight: |
14.1 / 31.8 kg/lb |
Transport Dimension (WxHxD): |
495x740x475 - 19.48x29.13x18.70 mm/inch |
Transport Weight: |
17.2 / 37.91 kg/lb |
|
Features
* DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 60° x 60° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 60° * Vertical Coverage: 60° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs |
Dual 12-inch two-way with 700 watts continuous, 2100 watts peak power handling. BIampable with 600 watts/4ohm LF and 75 watts 8ohm HF. DH7 3-inch voice coil titanium compression driver coupled with 75°x50° asymmetric CD horn aimed downward 10° . Weight: 35kg Measurements: 99x39x37,5cm |
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Chassis Size 304.8 mm (12“) Color Black Color White Directivity Index 11.1 dB Input Connections Four-pin Speakon (2) Speaker Type Fullrange Speaker Type Mid-High Speaker Type Two-Way Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover Yes Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 131 dB Coverage (Nominal -6 dB) H° 65 ° Coverage (Nominal -6 dB) V° 65 ° System Power Handling (Continuous/Program/Peak) 300 Watts LF Transducer DL12BFH HF Transducer DH2010 Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6 Ω Flying Yes Outdoor No Height 586 mm (23.07“) Width 429 mm (16.89“) Depth 312 mm (12.28“) Weight Net 14.5 kg (31.97 lbs) |
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone low frequency transducer and a 1? throat compression driver with titanium diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing black carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. A 35 mm tripod socket allows for stand mounting. APPLICATIONS: Intended for use in portable sound reinforcement and P.A.
FEATURES: 2-way vented loudspeaker system 1 x 12" speaker 1" compression driver with constant directivity horn 225 W power handling Highly resistant CAB enclosure
SPECIFICATIONS: RMS (Average) Power HandlingR: 225 W Program Power HandlingP: 450 W Peak Power HandlingK: 900 W On-axis Frequency RangeF: 60 Hz - 16 kHz Nominal Impedance: 8 Ω On-axis Sensitivity 1W / 1 mS: 98 dB SPL Rated Peak SPL at Full Power:128 dB Nominal -6 dB BeamwidthsB: 90° Horizontal (average, 500 Hz to 8 kHz) 75° Vertical Speech Coverage AnglesC: 90° Horizontal x 80° Vertical Enclosure Material:Complex Aggregate Board Finish:Blue Gray carpet Connector: 2 paralleled NL4 Speakon, wired Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in Weight: 20.3 kg/ 45 lbs Shipping Weight: 23.5 kg/ 52 lbs |
Reviews
There are no reviews yet.