Content | KACAUDIO KC-701 5" Coaxial 110-13000Hz Ceiling Speaker 3-10W 100V
- Model 701
- Name Ceiling Speaker
- Mount Type Spring Cli
- Rated Power 3-10W
- Input Voltage 100V
- Speaker 5\'\'
- Freq Resp 110-13000Hz
- Sensitivity 98dB
- Open Size 166MM
- Size 203*77MM
- Size: 203*77mm
- Weigth: 1.4 Kg
- Hole Size: 166MM
- Rated Power: 3-10W
- Frequency response: 110-13000Hz
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
| |
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | n/a | Rated Input | 6W (high impedance) | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16) | Impedance (100V Line) | 1.7kΩ (6W), 3.3kΩ (3W) | Impedance (70V Line) | 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W) | Impedance (25V Line) | 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W) | Low (Adjustable) | 16Ω, 8Ω | Sound Pressure Level | 88dB (1W, 1m) | Frequency Response | 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: 10cm cone- type | Speaker Component | Low frequency: 10cm cone- type | Mounting Hole | ø135mm(maximum ceiling thickness: 37mm) | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | Finish Enclosure | n/a | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | Artificial fiber, black | Dimensions | ø155 x 117 (D)mm | Weight | 1kg (including panel) | Accessories Panel | 1 | Ceiling reinforcement ring | n/a | Safety wire | n/a | Paper pattern | 1 | Option Anchor hanging bracket | n/a | Back can | HY- BC1 | Tile bar bridge | n/a | Trim ring | n/a |
|
Features:
- Consistent 90° broadband pattern control.
- Components:
300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
25 mm (1 exit) compression driver. - Extraordinary clarity for speech and vocals with extended frequency response for music.
- 250 Watt power handling with high sensitivity provides high SPL capability.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- Clean, contemporary grille and optional backbox available.
| System: Frequency Range (-10 dB): 34 Hz – 18 kHz Frequency Response (±3 dB): 47 Hz – 16 kHz Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz) Directivity Factor (Q): 8.7 (1k - 16kHz) Directivity Index (DI): 9.4 dB (1k - 16kHz) Long-Term System 250 W (1000 W peak), 2 hrs Power Rating, IEC: 150 W (600 W peak), 100 hrs Sensitivity (2.83V@ 1m):
94 dB measured half-space
99 dB computed for competitive comparison Maximum SPL: 118 dB cont ave (124 dB peak) Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance (321C): 8 ohms Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W Transducers: Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil. High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil. Physical: Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) 321C:
1) + in
2) + loop out
3) – loop out
4) – in Tap Connection (321CT): 321CT:
A) Common
B) 7.5W@70V, 15W@100V
C) 15W@70V, 30W@100V
D) 30W@70V, 60W@100V
E) 60W@70V, n/c@100V Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
UL Listed per UL1876 Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox. Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws. Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners. Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT. Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs) Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs) Included Accessories: Ported baffl e pre-attached, transformer on 321CT. Optional Accessories:
MTC-300SG12 Grille, square contoured, white.
MTC-300BB12 Backbox, 80 liters (3 cubic feet)
MTC-300T150 Transformer, 150 W for use with 321C. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 60W (high impedance) | Power Handling Capacity | Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω) | Impedance | (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W) | Impedance | (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W) | Impedance | (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W) | Low (Adjustable | 16Ω, 8Ω | Sound Pressure Level | 91dB(1W, 1m) | Frequency Response | 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Dome- type | Speaker Component | Low frequency: 16cm cone-type | Mounting Hole | ø250(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish Enclosure | Steel plate, plating | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø280 x 227 (D)mm | Weight | 5.1kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | n/a | Tile bar bridge | HY- TB1 | Trim ring | n/a | Electronic controller | n/a |
|
Reviews
There are no reviews yet.