| Content |
Bluetooth In.
Balanced Audio Out.
Turn any professional speaker into a Bluetooth speaker!
Convenience
Ditch the adapters.
Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.
Pairing Button
Press the Kali logo to pair.
LED Display
Blue light indicates volume level.
Weighted Knob
Enjoy precise control over the volume level at your fingertips. Volume control is independent, so you can leave volume on your device at full.
Balanced Outputs
Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.
Specifications
| |
|---|
| Channels: |
2 |
| Inputs: |
Bluetooth, 3.5mm (AUX) |
| Outputs: |
2 x XLR, 2 x TRS |
| Height: (Shipping) |
80mm (84mm) |
| Length: (Shipping) |
134mm (138mm) |
| Width: (Shipping) |
130mm (154mm) |
| Weight: (Shipping) |
.5kg (.6kg) |
| In the Box: |
MV-BT, Local Power Wall Wart |
|
MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.
\"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!
Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features
- 2x mono balanced 1/4\" TRS input (input A)
- 2x mono unbalanced RCA input (input B)
- 1x stereo unbalanced 1/8\" mini jack input (input B)
- 2x mono balanced XLR output (output A)
- 2x mono balanced / unbalanced 1/4\" TRS output (output B)
- 1x stereo unbalanced 1/8\" mini jack output (output B)
- selected high quality potentiometer for passive volume control
- A/B input selection switch
- L/R switch to swap left & right audio channels
- independent A and B buttons to enable and disable the outputs
- mono downmix button (mixes left to right channel and right to left channel)
- mute button to mute output signal instantly
| Manage multiple audio sources and sets of monitor speakers, track using illegally loud headphone amplifiers, and talk back to your drummer—all from your desktop. Switch quickly and easily between up to four audio sources with a selection of input types. Audition your music with your choice of three stereo pairs of speaker outputs, each with separate level control—and four screaming-loud headphone outs. With Monitor Station V2, you can evict the drummer from the main room, banish the guitarist to the bathroom, shove the singer into a closet, and make them like it. | MC7.1 - Surround Monitor Controller
MULTIPLE SOURCE STUDIO MONITOR CONTROLLER FOR 7.1/5.1 SURROUND & STEREO APPLICATIONS.
The Drawmer MC7.1 Surround Monitor Controller is a combined 7.1/5.1 and stereo monitor controller. Designed to provide all the mix checking features required for surround recordings without compromising on those used in stereo monitoring. It has the same pristine & transparent design as others from the Drawmer monitor controller pedigree, with a rugged desk top "wedge" form factor as used in the popular MC3.1.
Whether it is producing audio for film or television, or transporting the listener directly into the venue of an all encompassing orchestral piece, be it in 5.1, 7.1, quadraphonic, DTS®, Dolby Digital EX,THX Surround EX™, DTS-HD™, Dolby Atmos®, etc., one thing is sure, the number of users that wish to listen to audio within a surround setting has been growing and will continue to do so. There has been an ever increasing number of surround products coming to market, not only blue ray players and home cinema but also on mobile and media devices. For example, Apple devices have been capable of reproducing 7.1 surround since iOS 9.3. Therefore, it is likely that at some point every artist and engineer will consider trying surround sound, or fear being left behind.
Boasting two sets of balanced 7.1 Inputs, a 7.1 through, 1 Balanced Stereo Input and a convenient front panel Aux Input, with Balanced 7.1 Speaker outs and an independent Stereo main out with its own sub woofer option, there are no shortage of connectivity options. The Drawmer MC7.1 is capable of supporting any speaker seup, from mono, to stereo, various modes of surround, or 8 independent channels, depending on input type and speaker positioning.
The MC7.1 is a powerful Surround Monitor Controller in its own right, but is also perfect for controlling and checking your stereo mixes. This is one area where other surround monitoring controllers fall short. All studios, whether dedicated to film audio post production, or small home studio will at at some time (if not most of the time) work in stereo as well as surround. Aside from the surround capabilities, the MC7.1 contains the same comprehensive set of stereo "mix check" functions that are presented on the MC3.1 and which can of course be applied to the stereo input channel or any of the surround channels when these are routed to stereo.
The ability to "mix down" the surround mix to the FL and FR speakers OR the independent Stereo main speakers combined with the comprehensive cut or solo matrix means any combination of the surround channels can be listened to in the front mains. Want to focus in on the rear channels? Simply mix down to the front stereo speakers then solo them out of the mix! Whilst soloing out the centre or LFE channels give a central mono representation across the fronts or stereo mains!
Speaker level matching with switchable Mono/Sub output, the popular Low/Mid/High band solo feature, Internal Talkback Mic with footswitch control, and External Talkback Mic input are all brought over from the MC3.1, completing the rich array of features available on the MC7.1.
- Pristine, ultra low noise & transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.
- There are a total of 20 input sources. These include two separate 7.1 inputs (one via balanced jacks and one via 25 pin D-sub) with a through output to send to a multitrack recorder, for example. A Stereo input via Neutrik combijacks, and a Top panel 3.5mm AUX Input & Level Control for connecting MP3 players, smartphones or tablets etc.
- 3x Sets of Speaker Outputs. One 7.1 (or 8 Speakers in any configuration), one Stereo Left/Right pair, and one Mono/Sub. Each can be switched individually & simultaneously or give A/B comparisons. All eleven outputs have level trims to provide precise channel matching and ease of calibration.
- Each of the eight 7.1 speakers can be cut or soloed individually.
- 7.1 channels can be mixed down to 5.1, Stereo and Mono, though any configuration of up to 8 monitors should be possible depending on the source and the speaker layout.
- Stereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.
- When in stereo operation comprehensive Mix Checking facilities Including Low, Mid, High Solo; Dim; L/R Mute; Phase Reverse and more, help check every aspect of your Mix & Provide Ultimate Control.
- Volume can be set via the Variable Front Panel Knob or a Preset Control. Each has excellent channel matching and smooth feel.
- 2x Headphone Amplifiers with Individual Level Control.
- Built In Talkback with Level Control, Internal or External Microphone, Switching via Desktop or Footswitch, & Internal Routing to Headphones and also a Mono Output Jack.
- The MC7.1 is all analogue so won’t need to be rebooted due to software crashes, and doesn’t require firmware updates.
- Desktop 'wedge' form factor with a rugged steel chassis and a Kensington security slot for added protection.
|
The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced.
The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.
You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.
Key Features at a Glance
- Large volume knob with VCA control for precise level adjustments
- Built-in stereo USB audio interface
- 2 high-quality stereo inputs
- 3 independent monitor outputs to connect two stereo monitors and one mono monitor
- 2 headphone amplifiers with separate volume controls
- Crossfeed control emulates the stereo speaker panorama when listening through your headphones
- Convenient Mono and Dim functions
- Included eco-friendly power supply
- Designed and engineered in Germany
| Analog Inputs |
2 x XLR (input set 1)
2 x XLR (input set 2) |
| Input Impedance |
20 kOhms balanced, 10 kOhms unbalanced |
| Input Sensitivity |
Input Set 1: +4 dBu
Input Set 2: +4 dBu / -10 dBV |
| Analog Outputs |
Monitor Out A: 2 x XLR, balanced
Monitor Out B: 2 x XLR, balanced
Monitor Out C: 1 x XLR, balanced
Phones: 2 x 1/4" TRS, phone type |
| USB |
USB 1.1, type-B |
| D/A Conversion |
44.1 / 48 kHz |
| Frequency Response (-3 dB) |
< 10 Hz to 120 kHz |
| SNR |
85 dB at 0 dB, A-weighted |
| CMRR |
> 50 dB at 1 kHz, 0 dBu input level, unity gain |
| THD+N |
0.03% at 1 kHz, 0 dBu input level, unity gain |
| Crosstalk |
> 75 dB at 1 kHz |
| Attenuation |
Dim: -15 dB |
| Power Supply |
100 to 240 VAC, 50 / 60 Hz |
| Dimensions (H x W x D) |
3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm |
| Weight |
3.3 lb / 1.5 kg |
|
The M-Patch 2 is a compact desktop/rack-mountable sized passive volume attenuator and patch control device. Building on the success of the original M-Patch, the new M-Patch 2 is a feature packed passive problem solver for nearly all production environments. A great way to passively attenuate stereo signals from soundcards, CD players, pre-amps, and mixers, the M-Patch 2 front panel rotary controls allow precise level adjustments for two input sources. Featuring balanced combo XLR/TRS input jacks and XLR outputs, RCA & 3.5mm jack inputs, mono/stereo summing switch, Mute switch, A/B output pairs, and a built in stereo headphone amplifier, the M-Patch 2 has all bases covered.
- High quality? passive volume attenuator
- Great monitor switching device
- 2 x Input channels, 2 x Output channels
- Combo, RCA, & 3.5mm input connectors
- XLR outputs (balanced or unbalanced depends on the inputs selected)
- Mono/Stereo summing switch
- System mute function
- Built in headphone amplifier
- Quality components and rugged construction
- Desktop or Rack-mountable installation
- External 16Vac power supply (Supplied. Only required for operation of headphone amplifier) |
Reviews
There are no reviews yet.