KALI AUDIO LP-6 WHITE Active studio monitor 6,5″ (Piece)

No longer available!

179.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Project Lone Pine Kali\’s debut LP-6 studio monitors are designed to give you world-class power and accuracy without breaking the bank. Performance Transparency. Clarity. Accuracy. Kali Audio\’s Lone Pine Series studio monitors are designed to allow you to hear every detail that\’s happening in your mix. This starts with an exceptionally accurate frequency response. Whatever […]

 

Read more

Project Lone Pine

Kali\’s debut LP-6 studio monitors are designed to give you world-class power and accuracy without breaking the bank.

Performance
Transparency. Clarity. Accuracy.

Kali Audio\’s Lone Pine Series studio monitors are designed to allow you to hear every detail that\’s happening in your mix.

This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you\’ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.

With the LP-6, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.

80W Class D Power

39 Hz Lower Frequency Response

< 3% System THD 94 dB @ 1M

112 dB Max SPL

3-D Imaging Waveguide

Hear three dimensional sound from a stereo pair of speakers.

Dual-Layer Voice Coil

Large diameter voice coil allows for low distortion and high dynamic range.

Low Noise Port Tube

Precisely engineered using airflow simulations for powerful bass without port noise.

The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on.

Rather than make our own claims about the accuracy of our speakers, we had them independently tested by Pro Sound Testing in Greenville, Indiana. You can download their full test data from the links below, and explore the frequency response, dispersion, and distortion characteristics of both the LP-6 and LP-8. Please note that this data requires the “Common Loudspeaker Format Viewer” application to view.

Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.

This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily.

Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you’re hearing the bass that you have on the track.

The integrated Class D Power amp delivers clean, reliable power that’s optimized to this speaker.

Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.

Boundary EQ Control

A speaker’s given position in a space can drastically change it’s frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.

Happily, most of the common positions are fairly predictable and easily corrected.

Kali’s team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers.

Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed.

Easy Connections

The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.

The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.
3-D Imaging Waveguide

The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What’s more: it’s calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.

In practical terms, what this means is that you’re hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you’re working on. This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.

Low Noise Port Tube

We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they’d be placed against walls. At the same time, we didn’t want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn’t make noise.

On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as “chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.

The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.

Powered: Yes
Amp Class: D
Power Config: Bi-Amped
LF Power: 40 W
HF Power: 40 W
Total Power: 80 W
LF Driver: 6.5″ Woofer
HF Driver: 1″ Soft Dome Tweeter
Freq. Response (-10 dB): 39 Hz – 25 kHz
Frequency Range (±3 dB): 47 Hz – 21 kHz
Crossover: 1.5 kHz
Listening Distance: 2.2 Meters
Max SPL: 112 dB
Weight 7.00 kg

Reviews

There are no reviews yet.

Be the first to review “KALI AUDIO LP-6 WHITE Active studio monitor 6,5″ (Piece)”

Your email address will not be published. Required fields are marked *

Quick Comparison

KALI AUDIO LP-6 WHITE Active studio monitor 6,5" (Piece) removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeM-AUDIO BX8 D3 MONITOR SPEAKER removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeBEHRINGER MS16 2x8W 2-Way Active Personal Monitor System pair removeADAM A8X Active Studio Monitor 150W remove
NameKALI AUDIO LP-6 WHITE Active studio monitor 6,5" (Piece) removeBEHRINGER MS20 24-Bit-192 kHz Digital 20-Watt Stereo Near Field Monitors pair removeM-AUDIO BX8 D3 MONITOR SPEAKER removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeBEHRINGER MS16 2x8W 2-Way Active Personal Monitor System pair removeADAM A8X Active Studio Monitor 150W remove
Imagems16 personal monitor behringer 16w active pair αυτοενισχυόμενο 2x8w
SKULP6WE005320MIEM000281DM-2100E005319A8X
Rating
Price 179.00 incl. GR VAT 119.00 incl. GR VAT 182.99 incl. GR VAT 378.80 incl. GR VAT 112.00 incl. GR VAT 1,045.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

In stock

In stock (can be backordered)

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockIn stockIn stock (can be backordered)Available on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Perfect for Home Studios and Multimedia Applications
  • 2-Way Studio Monitors with 2 x 8 Watts Power Output
  • Dedicated Volume, Mic Level, Bass and Treble Controls
  • Powerful 4'' Woofers and High-Resolution 1.5'' Tweeters
  • 1/8'' TRS Stereo and RCA Stereo Input Connectors
ContentProject Lone Pine Kali\'s debut LP-6 studio monitors are designed to give you world-class power and accuracy without breaking the bank. Performance Transparency. Clarity. Accuracy. Kali Audio\'s Lone Pine Series studio monitors are designed to allow you to hear every detail that\'s happening in your mix. This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you\'ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing. With the LP-6, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using. 80W Class D Power 39 Hz Lower Frequency Response < 3% System THD 94 dB @ 1M 112 dB Max SPL 3-D Imaging Waveguide Hear three dimensional sound from a stereo pair of speakers. Dual-Layer Voice Coil Large diameter voice coil allows for low distortion and high dynamic range. Low Noise Port Tube Precisely engineered using airflow simulations for powerful bass without port noise. The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on. Rather than make our own claims about the accuracy of our speakers, we had them independently tested by Pro Sound Testing in Greenville, Indiana. You can download their full test data from the links below, and explore the frequency response, dispersion, and distortion characteristics of both the LP-6 and LP-8. Please note that this data requires the "Common Loudspeaker Format Viewer" application to view. Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom. This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily. Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you’re hearing the bass that you have on the track. The integrated Class D Power amp delivers clean, reliable power that’s optimized to this speaker. Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer. Boundary EQ Control A speaker’s given position in a space can drastically change it’s frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound. Happily, most of the common positions are fairly predictable and easily corrected. Kali’s team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers. Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed. Easy Connections The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input. The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack. 3-D Imaging Waveguide The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What’s more: it’s calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately. In practical terms, what this means is that you’re hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you’re working on. This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general. Low Noise Port Tube We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they’d be placed against walls. At the same time, we didn’t want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn’t make noise. On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end. The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
Powered: Yes
Amp Class: D
Power Config: Bi-Amped
LF Power: 40 W
HF Power: 40 W
Total Power: 80 W
LF Driver: 6.5" Woofer
HF Driver: 1" Soft Dome Tweeter
Freq. Response (-10 dB): 39 Hz - 25 kHz
Frequency Range (±3 dB): 47 Hz - 21 kHz
Crossover: 1.5 kHz
Listening Distance: 2.2 Meters
Max SPL: 112 dB

Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors

OVERVIEW

The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.

The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.

Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.

 FEATURES

  • 2-Way active studio monitor pair
  • Ideally suited for computer studios, multimedia workstations and keyboards
  • Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
  • Powerful woofers and high-resolution tweeters
  • High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
  • Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
  • Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
  • Individual volume controls for both Line inputs plus Bass and Treble EQ controls
  • 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel

SPECIFICATIONS

MS20 Digital Monitor Speakers (Pair)

  • Loudspeakers
    Tweeter: ˜ 65 mm (2 1/2“), 8 ?
    Woofer: ˜ 92 mm (3 5/8“), 4 ?
    Audio Inputs
    Line 1: 1/8" TRS stereo, impedance 20 k?
    Line 2: 2 RCA, impedance 20 k?
    Digital Inputs
    Optical: TOSLINK
    Coaxial: RCA
    Converter: 24-bit
    Sample rate: System Specs
    Output power: 2 x 20W
    Frequency response: 50Hz to 25kHz
    Power Supply
    Mains Voltages: USA/Canada 120 V, 60 Hz
    Power Consumption: 80W
   
M-Audio BX8 D3 Features:
  • 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
  • Bi-amplified design delivers a sound that's both powerful and precise
  • Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
  • Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
  • Acoustic Space Control tailors your monitor to your mix space
  • Volume control for dialing in the perfect playback level
  • Balanced combo input allows for flexible installation
  • Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
  • Frequency Range: 37Hz – 22kHz
  • Crossover: 2.0kHz
  • Maximum Peak Input Level: -2dBU
  • Input Types: Balanced 20kO XLR, and TRS
  • Unbalanced: 10kO TS
  • Input Sensitivity: -12dBU
  • HF Driver Size: 31.8 mm (1.25“)
  • LF Driver Size: 203 mm (8“)
  • Amplifier Power: 150W Class A/B
  • HF Driver Power Amp: 70W
  • LF Driver Power Amp: 80W
  • Port: Rear internally flared
  • Controls: Yes
  • Magnetic Shielding: Yes
  • AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
  • Enclosure Construction: MDF
  • Enclosure Finish: Black PVC
  • Baffle Construction: Injection-molded ABS
  • Baffle Finish: Matte black with Soft-touch
  • Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
  • Weight: 10.5 kgs (23.1 lbs)
  • Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
  • Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
  • Shipping Weight: 12.8kgs (28.22lbs)
  • Configuration: 2-Way bi-amp
  • System Type: Active Monitor
  • Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
  • Power Consumption: 150W
  • Shape: Bass-reflex

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
Behringer MS-16 2x8W 2-Way Active Personal Monitor System The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.

Full Description

Compact and Ideal For Home Studio

The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.

Input Connections

The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.

Features

  • Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
  • Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
  • Dedicated Volume, Bass and Treble controls for more flexibility
  • Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
  • Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
  • 1/8'' TRS headphone connector with auto-mute loudspeaker function
  • Magnetically shielded for placement near computer monitors
  • Designed and engineered in Germany

Specifications

  • Woofer: 4''
  • Tweeter: 1.5''
  • Output Power: 2 x 8 Watts
  • Frequency Response: 80Hz - 20kHz
  • Speaker Impedance: 4?
  • Input 1:
    • Connector: 1/8'' TRS Stereo
    • Input Level: -10dBm, 10k?
  • Input 2:
    • Connector: RCA Stereo
    • Input Level: -10dBm, 10k?
  • Mic Input:
    • Connector: 1/4'' TRS
    • Input Level: -50dBm, 50?
  • Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
  • Weight: 4kg
 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Weight7.00 kg6.00 kg13.00 kg15.00 kg4 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.00 kg
Weight 6.00 kg
Weight 13.00 kg
Weight 15.00 kg
Weight 4 kg
Weight 13.00 kg