KENTON THRU 5 1in to 5 THRU Split Midi opto-isolated

• High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.
• 1 MIDI In & 5 MIDI Thrus
• Works for ALL MIDI messages including Clock, SysEx, MTC etc.
• Includes schmitt trigger logic for signal quality restoration
• Less than one microsecond latency
• DC power input jack 2.1mm (centre +ve)
• Power/Data indicator light
• Housed in a metal box so it can withstand the knocks
• Attractively finished in brushed aluminium with black screen print
• 9V switch mode power supply included. Products bought directly from Kenton are supplied with the appropriate power supply for the delivery address. Four types are available, UK / EU / USA / Australia.

• Switchable mic/line input
• Phantom power
• Gain control
• 1/8” headphone output
• XLR mic input
• High-impedence guitar input
• Mic input powered by two AA batteries
• Non-powered guitar input

• Connect plugKEY to your iOS device and a 5-pin DIN MIDI controller
• “Made for iPod/iPhone/iPad" certification obtained from Apple
• Two studio-quality 1/4" jack audio outputs
• 1/8" stereo headphone output
• Volume control
• Use while charging your iOS device
• Compact design can be taken anywhere
• Free apps that let you start immediately playing and producing music

Devices: iPad and iPhone 4
iOS version: 4.3 and later

Connection: Dock connector port (no batteries required)

*Software: Made for GarageBand

Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed

Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application

• PureDIGITAL instrument connection delivers pristine sound quality

• Designed for electric guitar and bass

• No confusing setup, you can start recording in minutes

• Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac

• Control knob allows easy input level adjustment

• Multicolor LED for status indication and input level monitoring

• Studio quality instrument preamp with up to 40dB of gain

• High quality locking output connects directly to iPad and iPhone or USB port on a Mac

• 44.1kHz, 24-bit analog-to-digital conversion

• Auto Soft Limit for optimal input level

• Powered by connection to iPad, iPhone or Mac

• Made in the U.S.A.

• JAM
• 0.5m cable for connection to iPad and iPhone
• 1m cable for connection to Mac
• Quick start guide
• Velcro strip

The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.

Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.

The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.

An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.

Main Features

Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications

General
Microphone type        Cardioid condenser (stereo)
Maximum input level        125 dB SPL
Input level adjustment range        0–40 dB
Frequency range        10 Hz – 20 kHz
Sampling frequency        44.1 kHz
Bit rate        16 bit
iOS device recharging port        USB Mini-B connector
iOS device connector        30-pin dock connector
Device support        iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply        Provided through the iOS device connector
Power consumption        90 mW
Dimensions (W x H x D)        56 mm x 57 mm x 22 mm (including connector)
Weight        30 g
Operating temperature range        5–35 °C
Design and specifications subject to change without notice.

TASCAMʼs iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAMʼs best-selling USB audio interfaces, including a pair of great-sounding microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad – true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.

In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. MIDI in and out are provided to interface with synths and drum machines, and a digital output connects to digital mixers or recorders.

When youʼre ready to get serious with iPad music recording, step up to the pro-quality interface of TASCAMʼs iU2.

    Audio/MIDI Interface for Mac, Windows and iOS devices
    Compatible with iPhone, iPad and iPod Touch
    Two XLR mic inputs with phantom power
    Two balanced line inputs
    Instrument-level input for guitar or bass
    MIDI in and out
    Onboard A/D conversion for low-noise and distortion when recording with iOS devices
    Zero-latency direct monitoring
    S/PDIF Digital Output
    Includes USB cable, iOS dock connection cable, XLR to ¼” conversion cables

 User\'s Manual