| Content |
Features
KLA12
500 W x 500 W power module
Rugged, ABS enclosure delivers light-weight durability
SOLO™ Rigging System supports deployment without tools or external hardware
Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
Extensive DSP further enhances and protects performance
1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
powerCON® Input and Thru connections
Tilt-Direct™ pole mount assists directivity in single-unit applications
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 1.8kHz
Maximum Peak SPL 131dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 18 Degrees
Enclosure Material ABS Thermoplastic
Mounting Options Fly
Inputs 1 x XLR
Outputs 1 x XLR
Height 15“
Width 23.4“
Depth 16.6“
Weight 55 lbs.
Manufacturer Part Number KLA12-BK
|
The HX-5B-WP is a 2-way compact speaker system that permits both constant directivity control over a wide frequency range and changes in directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noises. The HX-5B-WP is designed for outdoor use.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous pink noise: 200 W, Continuous program: 600 W | | Rated Impedance | 8 Ω | | Sensitivity (1 W, 1 m) | 96 dB (60゜ mode), 97 dB (45゜ mode), 98 dB (30゜ mode), 99 dB (15゜ mode) * | | Frequency Response | 95 - 20,000 Hz (-10 dB) (60゜ mode), 100 - 20,000 Hz (-10 dB) (45゜ mode),
105 - 20,000 Hz (-10 dB) (30゜ mode), 110 - 20,000 Hz (-10 dB) (15゜ mode) | | Crossover Frequency | 4 kHz | | Directivity Angle | Horizontal: 100゜ (over 2000 Hz)
Vertical: 60゜ (over 800 Hz), 45゜ (over 1.2 kHz), 30゜ (over 1.6 kHz),
15゜ (over 3.2 kHz) variable | | Speaker Component | Low frequency: 12 cm cone-type × 4, High frequency: Balanced dome-type × 12 | | Speaker Cord | 2-core cabtyre cord with diameter of 6 mm | | Water Protection | IPX4 (Install with the every speaker module downward.) | | Operating Temperature | -15℃ to +50℃ | | Finish | Enclosure: Polypropylene, black
Punched net: Surface-treated steel plate, black, rust proof coating | | Dimensions | 408 (W) × 546 (H) × 342 (D) mm | | Weight | 16 kg | | Accessory | Hanging bracket …2, Hex. wrench …1 | | Option | Matching transformer: MT-200
Speaker mounting bracket: HY-PF1WP, HY-CW1WP, HY-WM1WP, HY-WM2WP,
HY-CN1B-WP | * (Factory-preset: 60゜ mode)
|
The SR-C15B Sub-woofer system is designed to be used in conjunction with the SR-C8L or SR-C8S Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8
Digital processor: DP-0206 |
|
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 450 W | | Rated Impedance | 8 Ω | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | | Speaker Component | 38 cm (15“) cone-type | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34“),
conductor cross section: 1.25 m㎡ (0.05“), 4-core cable, 3 m (9.84 ft) | | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | | Weight | 41 kg (90.39 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.
| Features : | | Specifications : |
- Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
| - Independently accessible voice coils, enabling external parallel or series wiring.
| - Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
| - For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
| | |
| Frequency Range | : | 25 Hz - 160 Hz (-10dB) |
| | Frequency Response | : | 34 Hz - 125 Hz (± 3 dB) |
| | Continuous Power Rating | : | 2000W |
| | Sensitivity | : | 91 dB, 1W / 1m (2.83 Vrms at 3.3 ft) |
| | Nominal Impedances | : | 8 ohm |
| | Dimensions (W x H x D) | : | 787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in) |
| | Weight | : | 50.4 kg (111 lb) | | |
|
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
Reviews
There are no reviews yet.