KORG KA-189 AC Adaptor Suited For AX10G and AX10B, AX1500G Effects Pedals

The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.

The main features of the Korg KA189 Power Supply include:

• Suitable for: microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron
• Voltage: DC
• Output Current: 1100 mA
• Output Voltage: 9V

Power Supply Unit for effects Pedals and Amplifiers

• Fully regulated universal pedalboard power supply
• 4 standard centre negative outputs with 1,000 mA output total
• Short circuit and overload protection for each outlet
• DC cables and mains adapter included

Universal Effects Pedal Floor Board with Integrated Power Supply
Ultra-compact and lightweight pedal board for transporting up to 12 effects pedals
Generous 1.7 A power adapter included for powering more than 12 devices*—includes all cabling
Ultra-rigid plastic design withstands even heavy impact
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe—and ready to rock at a moment's notice—with the PB1000.
It's all about connections
This pedal board makes hooking up 12 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes ¼" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power.
The Ins and Outs
Connect your guitar, bass or keyboard to the single ¼" input in the upper right corner of the board. A pair of ¼" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two ¼" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps. When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place. The heavy-impact plastic casing will protect your pedals from the rigors of the road.
Value
You have invested considerable time and money into your effects chain. Keep it safe and sounding great with the PB1000. Check it out at your nearest BEHRINGER dealer.

 User's Manual

Universal Effects Pedal Floor Board with 9 V DC Power Supply and Patch Cables
Ultra-compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables
Generous 1.7 A power adapter included for powering more than 12 devices*—includes 1 x 6 daisy-chain cabling
Ultra-rigid plastic design withstands even heavy impact
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe—and ready to rock at a momentʼs notice—with the PB600.
It's All About Connections
This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if youʼre using pedals that arenʼt 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when youʼre transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when youʼre dealing with a ratʼs nest of loose cabling, but with the PB600, your effects chain is always safe and organized.

When itʼs time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The heavyimpact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.

User's Manual

• Choice of 9V DC, 12V DC, 12V AC or 18VDC -150mA
• Noise-cancelling galvanic isolated outputs
• Traditional EI Transformer
• Several different voltage types served
• Current doubler = the possibility of as much as 600 mA
• Switchable 115V or 230V
• Compact, rugged, road-ready design