Perform backed by 100 full-fledged rhythm patterns Use the tap tempo feature to adjust the tempo intuitively, or use the tempo adjustment buttons to make fine adjustments Adjust the volume of the drum machine to fine tune the mix balance with your guitar sound Tuner function ensures that your pitch is accurate Overdrive/distortion effect for […]
Perform backed by 100 full-fledged rhythm patterns
Use the tap tempo feature to adjust the tempo intuitively, or use the tempo adjustment buttons to make fine adjustments
Adjust the volume of the drum machine to fine tune the mix balance with your guitar sound
Tuner function ensures that your pitch is accurate
Overdrive/distortion effect for electric guitar
Recorder allows 16-bit/44.1 kHz PCM recording and playback
Approximately 20 minutes of recording, with a maximum of 100 tracks
USB port allows your recorded phrases to be easily backed-up to your computer
Internal mic supports acoustic instruments
Built-in speaker lets you immediately listen back to recorded sounds
Recorder section Recording format PCM audio format WAV, format (extension: .wav), 44.1 kHz@16-bit Available recording time Approximately 20 minutes (Internal memory: 120 MB) Total number of tracks Up to 100 tracks Tuner section Scale 12 note equal temperament Detection range C1 (32.70 Hz) – C8 (4,186.01 Hz) Detection accuracy: Less than ±1 cent Drum machine section Tempo range 30 – 252 beats per minute (BPM) Number of drum patterns 100
(8Beat: 12, 16Beat: 13, POP/ROCK: 13, JAZZ/FUNK: 9, WORLD: 11, DANCE: 8, FILL: 11, ODD METER: 9, METRONOME: 12, SONG: 2) Effect section Overdrive, Distortion Others Connectors INPUT jack (1/4“mono), PHONES jack (1/8″ stereo mini) Speaker Dynamic speaker (φ23 mm) Power supply Two AAA batteries (alkaline or nickel-metal hydride batteries) Battery life* (when using the speaker / when using headphones)
Recorder: Approximately 3.5 / 11 hours
Drum machine: Approximately 9 / 12 hours
Tuner: Approximately 11 / 16 hours
*Continuous operation when using alkaline batteries with the backlight off and the volume at maximum. Dimensions
(W x D x H) 111 x 82 x 18 mm / 4.37″ x 3.23″ x 0.71″ Weight 122g/4.30 oz (including the accessories battery) Accessories AAA batteries x 2 for verifying functionality, Rubber feet
Weight
0.20 kg
Reviews
There are no reviews yet.
Be the first to review “KORG BEATBOY Drum machine, recorder, tuner” Cancel reply
Perform backed by 100 full-fledged rhythm patterns
Use the tap tempo feature to adjust the tempo intuitively, or use the tempo adjustment buttons to make fine adjustments
Adjust the volume of the drum machine to fine tune the mix balance with your guitar sound
Tuner function ensures that your pitch is accurate
Overdrive/distortion effect for electric guitar
Recorder allows 16-bit/44.1 kHz PCM recording and playback
Approximately 20 minutes of recording, with a maximum of 100 tracks
USB port allows your recorded phrases to be easily backed-up to your computer
Internal mic supports acoustic instruments
Built-in speaker lets you immediately listen back to recorded sounds
Recorder section Recording format PCM audio format WAV, format (extension: .wav), 44.1 kHz@16-bit Available recording time Approximately 20 minutes (Internal memory: 120 MB) Total number of tracks Up to 100 tracks Tuner section Scale 12 note equal temperament Detection range C1 (32.70 Hz) - C8 (4,186.01 Hz) Detection accuracy: Less than ±1 cent Drum machine section Tempo range 30 - 252 beats per minute (BPM) Number of drum patterns 100
(8Beat: 12, 16Beat: 13, POP/ROCK: 13, JAZZ/FUNK: 9, WORLD: 11, DANCE: 8, FILL: 11, ODD METER: 9, METRONOME: 12, SONG: 2) Effect section Overdrive, Distortion Others Connectors INPUT jack (1/4“mono), PHONES jack (1/8" stereo mini) Speaker Dynamic speaker (φ23 mm) Power supply Two AAA batteries (alkaline or nickel-metal hydride batteries) Battery life* (when using the speaker / when using headphones)
Recorder: Approximately 3.5 / 11 hours
Drum machine: Approximately 9 / 12 hours
Tuner: Approximately 11 / 16 hours
*Continuous operation when using alkaline batteries with the backlight off and the volume at maximum. Dimensions
(W x D x H) 111 x 82 x 18 mm / 4.37" x 3.23" x 0.71" Weight 122g/4.30 oz (including the accessories battery) Accessories AAA batteries x 2 for verifying functionality, Rubber feet
SamplePad 4 comes equipped with four responsive, LED-illuminated rubber pads, dual-zone trigger input, and eight preset kits. With a built-in library of the most commonly requested percussion and electronic drum sounds and the ability to load samples, the only limit is the playerʼs imagination. For even more flexibility, users can tune and add reverb to their sounds. Intuitive navigation makes it easy to browse through kits and players can drag and drop their samples via USB on a Mac or PC without removing the SD card. The bright blue LED lighting is clearly visible in every setting.
SamplePad 4 Features:
4 pads allow endless percussive and sampling triggering possibilities
Built-in library of 25 of the most popular percussion and electronic drum sounds
8 preset kits
Add any sound sample to your drum or percussion setup via SD card
Accepts SD/SDHC cards up to 32GB, storing 91 user kits and 512 samples per card
Dynamic blue LED lighting provides clear visibility in any setting
Intuitive navigation lets you browse through your kits with ease
Drag and drop samples via USB on Mac or PC without removing the SD card
USB-MIDI in/out
Tune and add reverb to your sounds
Dual Trigger input for expansion
MULTI-Level, MULTI-Play, and MULTI-Purpose!
- The most powerful, all-in-one percussion pad that suits anyone from a beginner to an expert, accommodating different levels of playing, a wide variety of playing styles and performance situations.
- DTX-MULTI 12 equips the 12 pads which are easy to be distinguished even at the dark stage. You can use the DTX-MULTI 12 in a variety of ways, such as using the percussion pad in combination with acoustic drums and percussion to accent music with a rich variety of voices, transferring data to the connected computer where you can compose music with the included 'Cubase AI 5' program, and connecting a kick pedal (sold separately) to create as a compact drum set.
In addition to a broad spectrum of voices taken from the world renowned, flagship MOTIF series synthesizers, the DTX-MULTI 12 also features many new percussion sounds that have been collected through Yamaha's advanced sampling techniques and ready-to-use effect sounds for a grand total of 1,277 voices.
- The DTX-MULTI 12 includes not only digital sounds but also DJ sounds and a rich variety of voices from percussion, chromatic percussion, folk, and acoustic drum instruments.
- You can also import WAV and AIFF audio files from a USB memory device and use them as voices.
- The DTX-MULTI 12 functions as a sample playback device with 64MB of battery backed Flash ROM.
- Together with great-sounding reverb and chorus effects that can be applied to entire drum kits, the DTX-MULTI 12 also features a Variation effect unit that can be used to enhance individual voices in many exciting ways.
- The DTX-MULTI 12 comes complete with 128 different MIDI playing patterns (including 3 demo patterns) from a world-wide range of musical genres including folk music, rock, and house.
- You can easily start and stop patterns by simply striking the pads. In addition, you can record your own performances as patterns or create patterns on a PC. These patterns can then be assigned to pads.
- Using the Tap Tempo function, you can set the tempo for patterns and the click track by simply striking pads. In this way, you can conveniently and intuitively set the tempo that you need.
The DTX-MULTI 12 provides a number of playing modes and features that enable performers to directly express their art and talent.
They are:
- Stick mode, optimized for playing the instrument with drum sticks
- Hand mode, for conveying subtle expressions through hand percussion.
- Finger mode, for extremely intricate finger drumming.
- Muting feature, which enables sounds to be muted or changed when a hand is pressed down on a pad as it is struck.
- Up to four different voices can be assigned to each pad.
- The DTX-MULTI 12 is packed with a multitude of features to stimulate creativity such as Stack mode in which all the notes assigned to a pad are triggered simultaneously with a single strike and Alternate mode in which the notes assigned to the pad are played individually in turn each time it is struck.
In addition to the MIDI In/Out port, the DTX-MULTI 12 is equipped with a USB TO HOST port that can be connected to a PC with a USB cable (sold separately) and a USB TO DEVICE port that can be save the user kit data on a USB memory.
- This connection can be used in a variety of ways. For example, those who have difficulty playing a keyboard can input MIDI data directly to DAW software, and others can play computer software synthesizer sounds by striking the DTX-MULTI 12.
- 'Cubase AI 5' by Steinberg, a DAW software application, is bundled with the DTX-MULTI 12. You can begin modifying the pitch and rhythm of the MIDI data that you input using the DTX-MULTI 12 and begin composing elaborate pieces of music on the same day you buy the DTX-MULTI 12.
- By installing the DTX-MULTI 12 Extension (planned for future release on our Web site), you will be able to control Cubase AI 5 directly from the DTX-MULTI 12 front panel. This extension will dramatically improve your efficiency in music composition.
The DTX-MULTI 12 comes with trigger-input jacks that five external pads can be connected to as well as one foot switch jack and one hi-hat controller jack.
You can customize the DTX-MULTI 12 to suit your needs. You can:
- Connect a hi-hat controller (such as the HH65) and a kick pad (such as the KP65) to use the DTX-MULTI 12 as a compact drum kit.
- Use a foot switch (such as the FC4) to switch between different drum kits and phrase patterns.
- Use a foot controller (such as the FC7 and FC9) to control the volume and effect values in real time.
- Connect a drum trigger (such as the DT20) to convert acoustic drum performances to trigger signals and input these signals for playback.
* Hi-hat controllers, foot switches, foot controllers, kick pads, and drum triggers are sold separately.
Circuit is designed to inspire. Two Novation polysynths and a four-part drum machine, combined with an intuitive grid-based sequencer in a standalone box that will have you making electronic music in minutes. Hit some pads, tweak the knobs and your track will start to emerge, all locked in time and key. Play around with effects, patterns and sounds in real time, to produce your track, brimming with fat grooves and beats.
Tech Spec
Product Hardware Specifications
32 RGB backlit velocity sensitive button grid
28 RGB backlit function buttons
8 Continuous pots with RGB indicator LEDs
Dedicated filter and volume pots
1/4" jack sockets for left and right outputs
Two MIDI sockets (3.5mm jack sockets with MIDI din break-out cables)
USB socket
Front-mounted 3.5mm jack socket for headphones
Integrated speaker
Rubberised knob caps
Rotary controls secured to the chassis with metal nuts
Power supply connector
Power switch
Battery compartment for 6x AA batteries (included)
Kensington Security Slot
Sound Engine
2 Nova synths
4 Part drum machine
6 Note polyphonic per synth
64 Synth patches
64 Drum patches
8 Synth macro controls (Control up to 4 parameters with one knob)
Real time record (notes, with velocity and automation)
Auto-quantise notes to steps and automation to 6 events per step
50 Automation parameters (up to 4800 events per pattern)
Internal tempo range 40 - 240
External synced tempo range 30 - 300
Swing 20 - 80%
Real Time Performance
Full range velocity scanning and record. Editable to 16 levels
16 Scale types and chromatic transposition
Synth expand view doubles playable area
Drum expand view allows real time drum record
Octave (input) and pattern octave (edit)
Pattern length and nudge
Configurable pattern chain
Session instant switching and queued switch
Editing
Velocity and gate per step
Multiple gate lengths per step (via real time record)
Automation edit per step
Clear step, automation parameter per pattern, pattern, session
Duplicate step, pattern
Software Compatibility
Ableton Live Lite 9 is included Circuit will also work as a standard USB-MIDI controller.
Power Requirements
Circuit can be powered using 6x AA batteries or a power supply (both included). It can not be powered via USB
Maximum power consumption 12V DC 600mA
Product Dimensions
240mm width x 200mm depth x 35mm height
OS Compatibility
OS compatibilty not relevant for this product range/type
Circuit Mono Station is a paraphonic analogue synthesiser that originates from the Novation Bass Station II, with three sequencer tracks that benefit from the 32 velocity-sensitive RGB pads found on Circuit.
Product Hardware Specifications
32 RGB backlit velocity sensitive button grid
18 RGB backlit function buttons
8 Pots including dedicated filter and volume pots
2 Encoders for tempo and modulation path depth
6 RGB backlit mini pots for mixer section
4 35mm sliders for envelope ADSR control
16 Tact switches
27 Orange LEDs for functional selection
19 RGB indicator LEDs
2 1/4” jack sockets for line out and audio input
3 3.5mm jack sockets for MIDI in, out and thru (MIDI din break-out cables included)
2 3.5mm jack sockets for analogue clock in and out
3 3.5mm jack sockets for CV, gate and aux CV output
USB B 2.0 / MIDI comms only (no bus-power)
Configurable MIDI channels
Front-mounted 3.5mm jack socket for headphones
Rubberised knob caps
Rotary controls secured to the chassis with metal nuts
Power supply connector
Power switch
Kensington Security Slot
Synth Engine
Paraphonic - dual osc, single amp with separate control of each oscillator\'s pitch
64 Synth patches
2 Oscillators + sub osc (follows the pitch of osc 1)
Sine, triangle, sawtooth, square / variable pulse width, sample and hold
Filter
State variable OTA filter
12/24dB slope
Low-pass / band-pass / high-pass
Pre-filter overdrive
Frequency and resonance controls
Modulation
4x8 Modulation matrix
All modulation routes available at all times with depth control for each route
Mod sources (4)
Envelope
LFO
Modulation sequence
Pad velocity
Mod destinations (8)
Osc 1 pitch
Osc 2 pitch
Osc 1 PWM
Osc 2 PWM
Amp
Filter cut-off
Distortion level
Aux CV outpu
Mixer:
Osc 1 level
Osc 2 level
Sub Osc level
Noise generator level
Ring modulation depth
Audio In (with gain control)
Distortion
3 types of analogue distortion: 1, 2 and 3 (combination of 1 & 2)
Sequencer
32 Sessions
2 Tracks per session + 1 track modulation sequence
16 Patterns for osc 1, 8 patterns for osc 2 and mod sequence
16 Demo sessions
Real time record (notes, with velocity and automation)
Auto-quantise notes to steps and automation to 6 events per step
Sequencer resolution 24 PPQN
51 Automation parameters
All knob and slider movements can be recorded (excluding volume)
All modulation route depths can be automated
Tempo range 40 - 240 BPM
Swing 20 - 80%
Glide amount configurable per step
8 Pattern sync rates (incl. triplet rates)
Pattern direction setting including ping-pong and random
Pattern mutate
8 Global swing sync rates (incl. triplet rates)
Real Time Performance
Full range velocity scanning and record. Editable to 16 levels
16 Scale types and chromatic transposition
Synth expand view doubles playable area
Dual view for playing osc 1 and osc 2 simultaneously and independently
Paraphonic mode option switch to select how the amp envelope triggers
Configurable pattern start and end points
Configurable pattern chain
Instant and queued Session switching
Instant and queued Pattern switching
Editing
Velocity and gate per step
Fractional gate lengths (each step divisible by 6)
Automation edit per step
Clear step, automation parameter per pattern, pattern, session
Duplicate step, pattern
Software Compatibility
Ableton Live Lite 9 is included
Circuit Mono Station is a USB-MIDI class compliant device
Power Requirements
Maximum power consumption 12V DC 1A
Product Dimensions
The most compact, most-affordable multi-pad instrument
Built-in library of the most in-demand sounds
Four velocity-sensitive pads and a kick input for instant expansion of any drumset or percussion rig
Fits a standard snare stand, sits tabletop, or mounts on any stand or rack using the
Module Mount (sold separately)
Tune and edit sounds, and assign them to any of the four pads or the kick input
MIDI output for use as a controller for triggering sound modules and software
Includes:
PercPad multi-pad percussion instrument
Power supply
Quick start guide
AUDIO OUTPUTS
2x 1/4" Main
1/4" TRS Headphone
CONTROL
1/4" kick trigger input (switch/piezo switchable)
MIDI Out (DIN)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.