KORG PA500 ORT Professional keyboard-synthesizer

• 4-operator FM Sound Engine offers dynamic and expressive additive synthesis
• A new feature of this engine is continuously variable feedback on every operator allowing for a wide-range of sound creation
• Two programmable effects blocks with seven effect types per block:
• The effect types are: VCM Touch Wah, VCM Flanger, VCM Phaser, Chorus, Delay, Reverb and Distortion
• Multi-touch control interface gives direct access to four simultaneous parameters
• 32 Voice memory locations allow storing and recalling favorite Voices

Highlights:

• Even more vintage sounds, including the KORG SGproX piano, M1 and VOX organs and well-known "Tape" instruments
  
• 128 onboard sounds, plus 640 additional sounds included with the Editor/Librarian for Mac and PC!
  
• New yet nostalgic - black panel "new vintage" design
  
• Featuring MMT - the distillation of Korg's analog modeling technology
  
• Vocoder with included gooseneck microphone
  
• A powerful Kaoss effects engine - the kind of effects that you would expect from Korg
  
• Korg's proprietary Natural Touch mini-keyboard, designed with an emphasis on playability
  
• Battery powered operation is supported for increased portability

Tone Generator System:

MMT (Multiple Modeling Technology)

Multi Timbral:

Maximum 2 (when using Layer, Split, or Multi)

Voice polyphony:

Maximum 8 voices (when using Vocoder, it is 4 voices)
Structure:

[Synth] 2 oscillators + noise generator

Oscillator 1:

Waveform: 8 types (Sawtooth, Pulse, Triangle, Sine, Formant, Noise, DWGS, Audio In),

Modulation: Waveform, Cross, Unison, VPM 

Oscillator 2:

Waveform: 4 types (Sawtooth, Pulse, Triangle, Sine)

Modulation: Ring, Sync, Ring+Sync

Waveshape:

Type: Drive, Decimator, HardClip, OctSaw, MultiTri, MultiSin, SubOSCSaw, SubOSCSqu, SubOSCTri, SubOSCSin, LevelBoost,

Multimode Filters:

Filter 1: -24 dB/oct LPF ~ -12 dB/oct LPF ~ -12 dB/oct BPF ~ -12 dB/oct HPF ~ Thru,

Filter 2: LPF, HPF, BPF (swichable)

[Vocoder]

16 channel vocoder, adjustable level and pan for each channel, Formant Shift function, Formant Hold function

Keyboard:

37 notes (Natural Touch mini-keyboard, velocity sensitive)

Controller:

Pitch bend wheel

Modulation Wheel
Effects:

Timbre: 2 band EQ

Master effect: 2 units, 17effect algorisms.
Arpeggiator:

Six types: UP, DOWN, ALT1/2, Random, Trigger, Individual step on/off function
Programs:

128 programs (A/B banks x 8 genres x 8 category)

Inputs:

[AUDIO INPUT 1] (1/4" phone jack, unbalanced, with MIC/LINE switch) - Rear Panel
[AUDIO INPUT 1 (MIC)] (XLR jack / balanced) - Front Panel

Outputs:

[L/MONO, R] (1/4" Standard phone jacks / unbalanced)
[Phone] (1/4" Stereo Standard phone jacks)

MIDI:

IN, OUT
USB:

Type B
Display:

Custom LCD
Power Supply:

DC 9 V (AC adapter), or six AA alkaline batteries (sold separately)

Battery Life:

Approx. four hours (with alkaline batteries)
Dimensions:

556(W)x231(D)x73(H)mm/21.89“(W)x9.09“(D)x2.87“(H)

Weight:

2.0 kg/4.41 lbs. (without batteries and included microphone)
Accessories:

AC adapter, Gooseneck Microphone

Optional accessories:

Soft Case: SC-micro MSG

Mobile Monitor Amplifier : MMA-130(It provides a DC9V output jack that can provide power to one of a number of Korg instruments like microKORG XL+)

MicroKorg XL+ Sound Editor

Operating requirements
Windows

Supported Computer:

A computer that satisfies the operating requirements of Microsoft Windows XP/Vista/7 and is equipped with a USB port

Operating system:

Microsoft Windows XP SP3 (32 bit), Windows Vista SP2 (32bit, 64bit), Windows 7 SP1 (32bit, 64bit)

Mac
Supported Computer:

An Apple Macintosh computer that satisfies the operating requirements of Mac OS X and is equipped with a USB port and an Intel or Power PC processor

Operating system:

Intuitive and ultra-powerful volca sequencer
A fun to use sequencer with superb improvisatory potential

The step sequencer is designed for ease of editing and to allow parts to be inserted or removed "on the fly." Use the 16 step keys to enter notes intuitively while maintaining visual confirmation of the timing of the notes in a measure. You can also record your performance in real time.
Up to ten of the sequence patterns you create can be stored in internal memory.
Motion sequencer records and plays back up to 11 parameters

The motion sequence function records your knob movements, letting you add time-varying change to the sound. This is a great way to polish your loops, and also lets you generate highly original live performances. The volca sample is able to record all knob movements that are related to sound editing. This allows sophisticated editing that had been impossible for hardware samplers of this category.

Parameters that can be used with Motion Sequence
・ Start Point (Playback start location)
・ Length (Playback length)
・ Hi Cut (Cutoff frequency)
・ Speed (Playback speed)
・ Pitch EG Int (Pitch EG depth)
・ Pitch EG Attack (Pitch EG attack time)
・ Pitch EG Decay (Pitch EG Decay time)
・ Amp Level
・ Pan
・ Amp EG Attack (Amp EG Attack time)
・ Amp EG Decay (Amp EG Decay time)

Keyboard

　
    Multi touch Keyboard

Sampler

Type
    PCM

Maximum Polyphony
    8

Number of Samples
    100 (User over writable)

Memory Size for Sample
    4 MB, Maximum 65 seconds

Sampling Frequency
    31.25 kHZ, 16 bit

Edit
    Sample(Start Point, Length, Hi Cut), Pitch(Speed, EG Int, Attack,Decay), Amp(Level, Pan, Attack, Decay), Reverse On/Off

Effects

Digital Reverb
    On/Off, Mix

Analogue Isolator
    Bass, Treble

Sequencer

Number of Parts
    10

Number of Steps
    16

Number of Recording Patterns
    10

Control
    Motion Sequence, Active Step, Step Jump, Swing

Song

Maximum Number of Sequence
    16

Number of Recording Songs
    6

Connectors

Audio Output
    Headphones (3.5mm stereo mini jack)

Sync
    Sync In (3.5mm monaural mini jack, Maximum input level: 20V)
    Sync Out(3.5mm monaural mini jack, Maximum Output level: 5V)

MIDI
    MIDI IN

Power

Battery Life
    Approximately 10 hours (using alkaline batteries)

Power Supply
    AA alkaline battery × 6 or AA nickel-metal hydride battery × 6 Or AC adapter (DC 9V) (optional)　

Others

Accessories
    AA alkaline battery ×6 (for verifying operation), Cable  

Options
    AC adapter (DC 9V)

Dimensions
(W x D x H)
    193 × 115 ×45 mm / 7.60” x 4.53” x 1.77”

Weight
    372 g / 13.12 oz. (Excluding batteries)

Synth engine

• Up to 18 note polyphony (dynamic voicing)
• Mono-Timbral


Per patch:
• 3x oscillators
• 1x noise generator
• 2x ring modulators


Waveforms include:
• Square, sine, tri, sawtooth, pulse, 9x saw:pulse combinations.
• 20x digital waveforms
• 36x wavetables


Filtertypes:
2x filters per patch
• low pass no resonance 6dB per octave
• low pass 12dB
• low pass 18dB
• low pass 24dB
• band pass 6:6
• band pass 6:12
• band pass 12:6
• band pass 6:18
• band pass 18:6
• band pass 12:12
• high pass no resonance 6dB per octave
• high pass 12dB
• high pass 18dB
• high pass 24dB


Sources:
20 modulation slots per patch
• 6x envelope generators
• 3x LFOs.
• Aftertouch
• Velocity
• Key scaling/track
• Mod wheel
• Expression pedal


Total of 66 Destinations including:
• Oscillator pitch, pulse width, wavetable index, level and sync
• Filter cutoff, resonance, envelope settings
• Effects parameters and send levels
• Recursive modulation (modulating modulation sources themselves)


5 Effects slots per patch
• Distortion – up to 2 instances
• Compressor – up to 2 instances
• Chorus/Phase – up to 4 instances
• Delay – up to 2 instances
• Reverb – up to 2 instances
• Gator
• EQ
•12 band vocoder
• Arpeggiator – 33 patterns
• Chord function – lock up to 10 notes
• Patch storage up to 512 on hardware (ships with 300 factory patches)


Hardware

• 144 character LCD
• 8x detented touch sensitive encoders
• 1x large smooth encoder (with back-lit filter lock buttons)
• 1x large patch select/speed dial encoder
• 2x volume & monitor mix dials
• 39 LED lit/indicated buttons
• Pitch wheel (LED lit)
• Modulation wheel (LED lit)
• 37 note keyboard with velocity and aftertouch
• XLR dynamic mic input
• 2x ¼” jack inputs
• 2x ¼” jack outputs
• 2x ¼” jack aux outputs
• 1x ¼” jack headphone output
• SPDIF digital output on RCA connector
• Expression pedal on ¼” jack input
• Sustain pedal on ¼” jack input
• MIDI in/out/thru
• 12 volt power input
• USB port (UltraNova can be powered via USB)
• Kensington Lock port

Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the makings of a synth that is built for bass, but capable of so much more.

• Osc 1
• Osc 2
• Sub Osc (3)
• Noise generator

Osc 1 & 2

Select between waveforms:

• sine
• triangle
• sawtooth
• square/variable pulse width

Features

• Sync 1 & 2
• Detune 
• Octave range
• Pitch bend
• Pitch modulation from Mod Envelope and/or LFO 1
• Pulse width modulation from Mod Envelope and/or LFO 2

Sub Osc (3) which is tracked to Osc 1

Select independently between waveforms:

• Sine
• Square
• Narrow pulse

Features

• All modulation and tuning tracked to Osc 1
• Independent octave select 

• Osc 1 level
• Osc 2 level
• Sub Osc level
• Noise generator level
• Ring modulation depth
• External signal level

Two filter types

• Acid type (diode ladder filter design)
• Classic type (derived from original Bass Station)

Features

• Cutoff
• Resonance
• Overdrive
• Filter frequency to Mod Envelope depth
• Filter frequency to LFO 2 depth

Select 'Classic' filter between:

• Low pass
• Band pass
• High pass
• 12dB slope
• 24dB slope

Two ADSR Envelopes  (Attack/Decay/Sustain/Release)

• Amp Envelope
• Mod Envelope
• Combined control of both Envelopes

Select triggering mode between:

• Single trigger (holds envelope state when new note is played)
• Multi trigger (re-triggers with every new note played)
• Autoglide (engages portamento) 

There is also a VCA limiter

Two LFOs each selectable between:

• Triangle
• Sawtooth
• Square
• Sample and hold
• Both LFOs independently adjustable between rate and delay time
• Key sync LFO 1 & 2
• LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)

• Distortion send
• Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
   

Arpeggiator

• Up to 32 different patterns
• Select between 1-4 octave range
• Swing function
• Select direction:
• up
• down
• up / down 1
• up / down 2
• As played
• Random
• Latch (hold the arpeggiator)

Step Sequencer

• Up to four sequences
• Assign one of 32 preset rhythms or create your own
• insert rests or legato (slide)
• Sequencer re-trigger function

• Adjust glide time
• Single trigger or re-trigger modes
• Integrate into step sequencer and arpeggiator

• 25 note synth-action keyboard
• Aftertouch can be assigned to modulate:
• Filter frequency
• LFO 1to Osc pitch
• Osc 2 speed
• Pitch wheel
• Modulation wheel can be assigned to:
• LFO 2 to filter frequency
• LFO 1 to Osc pitch
• Osc 2 pitch
• Octave up/ down buttons
• 64 factory presets
• 64 slots for user patches (and patch dump facility for storing more)
• Master volume dial

• USB MIDI (for connecting & powering Bass Station II via host computer)
• Mono output on 1/4" TRS jack
• Headphone output on 1/4" TRS jack
• External input on 1/4" TRS jack
• Sustain pedal input on 1/4" TS jack
• MIDI IN / MIDI OUT ports on 5 pin din
• DC power input
• Switch between power off / DC powered / bus powered

• 18" wide x 10.75" deep x 3" tall