| Content | Portable Audio-/Midi-Interface for iPhone and iPad with Lightning Connection; 44.1/48kHz, 16/24 Bit; 2x Line-Out 1/4" TS (L/R Stereo); 1x Stereo Headphone-Out 1/8" Mini-TRS with Volume Control; MIDI-Input; Micro-USB Connection; Dimensions: 60 x 74 x 23 mm (WxDxH); Weight: 0,067 kg; colour: black;, System requirements: iOS 8 oder higher, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th.
Portable Audio-/Midi-Interface for iPhone and iPad with Lightning Connection; 44.1/48kHz, 16/24 Bit; 2x Line-Out 1/4" TS (L/R Stereo); 1x Stereo Headphone-Out 1/8" Mini-TRS with Volume Control; MIDI-Input; Micro-USB Connection; Dimensions: 60 x 74 x 23 mm (WxDxH); Weight: 0,067 kg; colour: black;, System requirements: iOS 8 oder higher, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th.
The black plugKEY from Korg is an audio and MIDI interface designed for use with iOS Lightning devices and any MIDI controller with a 5-pin DIN connector. The portable interface has a built-in Lightning cable to connect to your device, while the micro-USB charging port keeps your device charged while in use. Additionally, the plugKEY offers a stereo 1/8" headphone output with a dedicated volume knob that controls both the headphone and the two high quality 1/4" stereo outputs. The 5-pin DIN MIDI connector mitigates any issues with latency and offers excellent performance when using iOS apps. Korg has made available two free apps, Gadget Le and Module Le, to get you started.
- Connect plugKEY to your iOS device and a 5-pin DIN MIDI controller
- “Made for iPod/iPhone/iPad" certification obtained from Apple
- Two studio-quality 1/4" jack audio outputs
- 1/8" stereo headphone output
- Volume control
- Use while charging your iOS device
- Compact design can be taken anywhere
- Free apps that let you start immediately playing and producing music
| OS Compatibility |
iOS 8 or later |
| Device Compatibility |
iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation, iPod touch (5th, and 6th generation) |
| Connectors |
Apple Lightning
MIDI IN: 5-Pin Din jack
Charging Port: 5 VDC micro-USB |
| Audio Outputs |
Audio Line Outs (L/MONO, R): 1/4" / 6.35 mm phone jacks
Headphones: Stereo 1/8" / 3.5 mm mini phone jack |
| Dimensions (W x D x H) |
2.4 x 2.9 x 0.9" / 60.0 x 74.0 x 23.0 mm |
| Weight |
2.4 oz / 69.0 g |
|
Take the fast track to turning your creative ideas into content for the world to hear with the black Arturia MiniFuse 1, a portable 1x2 USB Type-C audio interface that combines great sound with operational simplicity and a robust software bundle. With its single low-noise mic / line / instrument preamp, the MiniFuse 1 helps singers, guitarists, podcasters, and online creators get clean, quality recordings. It also features a virtual loopback channel to enable easy capture of computer audio alongside the live input, such as a voiceover or guitar playthrough.
Despite the MiniFuse 1's compact size, it provides plenty of connectivity. In addition to the XLR-1/4" combo input, there are 1/4" speaker and headphone outputs with individual volume controls, and a built-in USB 2.0 Type-A hub that's perfect for hooking up a keyboard controller. The bundled software titles—Ableton Live Lite, Analog Lab Intro, Native Instruments GUITAR RIG 6 LE, Arturia FX, and more—deliver loads of interesting sounds and cool effects, plus a highly capable and popular music production DAW.
Make music and record audio wherever inspiration strikes, from your home studio to the great outdoors, with the MiniFuse 1 portable recording interface. Whether you're a solo guitarist, vocalist, budding content creator, or anything in between, enjoy sharp sound quality, smart features, and great software included as standard.
MiniFuse 1 fits right into your setup with a straightforward set of ins and outs. Its single XLR-1/4" combo input with 48V phantom power lets you easily connect a mic, Hi-Z instrument, or line-level source. Plug into your computer with quick and compact USB Type-C compatibility, and hook up headphones and speakers to the 1/4" outputs. Finally, connect USB devices like your MIDI keyboard with the additional USB Type-A hub socket.
For audiophiles, MiniFuse boasts a 110 dB dynamic range and a class-leading equivalent input noise of -129 dB. For everyone else, that means that every recording you make sounds incredible, with rich dynamics, clear noise-free signal, and studio-grade quality.
Break the mold and take your studio on the go. MiniFuse is not only compact and lightweight; its rugged aluminum casing can handle the mobile producer's lifestyle. Chuck it in your bag, get out there, and find the sound you've been looking for.
Whether you're using a laptop or desktop, MiniFuse can work for you. Windows or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can monitor its inputs, outputs, settings, and firmware updates in one place.
Easily capture voiceovers alongside in-app or in-game audio with MiniFuse's Loopback function, for quality content in one take.
MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge.
- Ableton Live Lite: Compose, record, perform, and produce anything with an introduction to one of the most widely used musical software titles in the business.
- Analog Lab Intro: Instantly add inspiring sounds from award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.
- Arturia FX: Color your sound with four premium FX plug-in recreations of studio classics; a lush plate reverb, a gritty analog preamp, a classic tape echo, and a rich stereo chorus.
- Native Instruments GUITAR RIG 6 LE: An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones.
- Auto-Tune Unlimited 3-Month Subscription: Refine your vocal parts for perfect harmony or go full trap-style auto-tune with a 3-month subscription to the industry's favorite voice tuning plug-in.
- Splice Creator Plan 3-Month Subscription: Access millions of hi-definition royalty-free samples, from lo-fi drum loops to punchy vocal one-shots, as well as synth sounds, Splice Skills tutorials, and much more.
| Features:
- 2 x Audient Console Mic Pre
- Class Leading Converters
- 1 x JFET Instrument Input
- 4 x Line Outputs
- Dual Headphone Outputs
- ADAT Input for Expandability
- Ultra Low Latency Software Mixer
- Advanced Monitor Control
- Scrollcontrol
- True Phantom Power over USB
- USB3.0 Bus Powered
- All Metal Design
- Free Software + Plugins
Key tech specs
- Mic gain: 58dB
- Mic pre EIN: 128dB A-Weighted
- Mic pre SNR: 100dB A-Weighted
- Mic pre THD+N: <0.002%
- Frequency response (at unity gain): ±0.5dB 10Hz to 40kHz
- ADC Dynamic range: 121dB
- ADC THD+N: <0.001%
- Line output dynamic range: 126dB A-Weighted
- Line output THD+N: 0.0005%
- Frequency Response: ±0.1dB 10Hz to 40kHz
Headphone amp (with USB-C host):
- Max Power with 30Ohm load: 220mW
- Max Power with 62Ohm load: 280mW
- Max Power with 600Ohm load: 100mW
Power requirements:
USB 3.0 - 900mA at 5V or USB-C - 1.5A at 5V
iD4 iPad Support Note: Older/low end iPads might not be supported - recommend use with
USB-C enabled iPads. Need to verify older iPads.
Included Cable:
USC Type C- Type C 1m
Free Software with ARC Bundled with a free suite of creative software including Cubase LE, alongside industry leading plugins and virtual instruments, you can start recording as soon as you open the box. | 2-Channel USB2.0 Audio Interface with USB-C Connection
- 24 Bit / 192 kHz
- XLR/TRS combo input for microphones, line signals and instruments
- +48 V phantom power switchable
- VU meter
- Monitor level control
- Headphone level control
- Switchable direct monitoring with mix control
- 2 Line outputs: 6.3 mm jack, balanced
- Stereo headphone output: 6.3 mm jack
- Integrated USB-A hub (USB-MIDI, max. 250 mA)
- MIDI in / out
- USB bus-powered
- Colour: Black
- Includes USB cable (type C to A) as well as Ableton Live Lite, NI Guitar Rig LE, Arturia Analog Lab Intro, Pre 1973, Plate 140, Tape 201, JUN 6
-
Recording / Playback Channels 2x2
Number of Instrument Inputs 2
Number of S/PDIF Connectors 0
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Max. sample rate (kHz) 192 kHz
Max. resolution in bit 24 bit
|
The Tascam iXJ2 allows an Apple iPhone 4/4S, iPad or iPod Touch 4G to be used with preferred microphones or
line level sources (instruments) to create CD-quality audio recordings. This handy extension is simply plugged
into the dock connector of the iOS device and is connected with up to two mono or stereo sources that can be
selected via a switch. Switchable plug-in power for small microphones and mono summing for news gathering are
also available.
The built-in A/D converter ensures high audio quality and low noise. Separate input level controls and
two-colour level indicators for the left and right channels make level adjustments easy, and a switchable
limiter can reduce sudden peaks and thus protect against unforeseen overload.
The iXJ2 is powered through the dock connector, so no battery is required. A USB input is provided to charge
the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from
AppStore at no charge.
Main Features
Use your favourite microphones or line level (instrument) sources to create high-grade stereo audio recordings
with an Apple iPhone 4/4S, iPad or iPod Touch 4G
Internal A/D converter allow recordings in CD quality (44.1kHz/16-bit)
Two unbalanced stereo input connectors (accept two mono or stereo sources)
Input selection switch (A/B/STEREO)
Switchable plug-in power
Selectable mono summing for news gathering
Limiter to avoid distorted recordings (selectable to either mono or stereo operation)
Separate input level rotary controls for channels L and R
Separate input level indicators for channels L and R (green/red)
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications
Inputs and outputs
Mic/Line input (A/B) 3.5-mm stereo mini jack (unbalanced)
Input impedance 2.2 kOhm (plug-in power ON)
10 kOhm (plug-in power OFF)
Nominal input level −66 dBV to −10 dBV
Maximum input level +6 dBV
iOS device recharging port USB Mini-B connector
iOS device connector 30-pin dock connector
Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad (1st generation), iPod touch
(4th generation)
Audio performance
Frequency range 20 Hz to 20 kHz +0/−2 dB (recording, JEITA)
S/N ratio 90 dB or more (recording, JEITA)
Power supply and other specifications
Power supply Provided through the iOS device connector
Power consumption 125 mW
Dimensions (W x H x D) 60 mm x 47 mm x 17 mm (including connector)
Weight 30 g
Operating temperature range 5–35 °C
Design and specifications subject to change without notice.
|
Collaborate. Capture. Create.
The amazing GO GUITAR is the only mobile interface you’ll need to record quick, on-the-go riffs anywhere, anytime with your iOS*, Android*, Mac* or PC mobile device. Just want to practice without the hassle of hauling around amps or blowing your roof off? Simply plug your electric or bass guitar into GO GUITAR along with your favorite pair of headphones. Jam or record literally anywhere you can fit yourself and your guitar.
Take It Anywhere
Whether you’re in your kitchen, relaxing in the park, or on the tour bus, GO GUITAR lets you create whenever and wherever the mood strikes. All you need is this simple guitar interface, a mobile device, and of course, your guitar!
APP-ly Some Effect
Want to add some effects to your guitar or record the riffs you’ve been working on? GO GUITAR integrates seamlessly with the creative suite of TC Helicon mobile apps. When it comes to sparking your creativity, TC Helicon has you covered with an extensive array of mobile applications designed specifically for your GO GUITAR device, including effects, processing and much more – plus they are all free to download from your app store! And if that's not enough, GO GUITAR is also compatible with a wide range of apps and software from 3rd-party vendors.
Can You Hear Yourself?!
Whether you want to jam in silence, or provoke noise-induced rage into your neighbors, GO GUITAR has you covered. Just connect some headphones to your GO GUITAR and hear yourself as you record or play with crystal clarity.
Not Just for Guitar
Yes, the word “Guitar” is in the name, but that’s not GO GUITAR’s only game! You can also use the line-in for your keyboard, mixer, or any other line-level audio device. GO GUITAR records high-quality recordings.
Record That Riff
Once you’ve solidified that hit-making hook, feel confident that you can capture high quality audio directly to your iOS, Android, Mac, or PC device using your favorite recording DAW. GO GUITAR ensures a broad dynamic range for a distortion-free audio signal so you can rest assured that the recording you create will compete with the rest of the world.
Strap It On
For those times when you’re crammed into an awkward space with nowhere to put your GO GUITAR, you can use the integrated clip and easily strap it onto your belt or guitar strap.
Guitar Interface
- Suitable for mobile iOS and Android devices, PC and Mac
- Instrument input for guitar, bass or other instruments (6.3 mm jack)
- Output for connecting an external amplifier (6.3 mm jack)
- Headphone output (3.5 mm)
- Rotary wheel for input level
- Selection switch for direct signal or FX signal
- Dimensions: 92 x 45 x 27 mm
- Weight: 70 g
|
Reviews
There are no reviews yet.