Content |
INPUT: 1 RF/75Ω, on an "F” type connector.
OUTPUT: 1 RF/75Ω, on an "F” type connector.
BANDWIDTH (-3dB): 40-3000MHz.
COUPLING: AC.
RF GAIN: + 20dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 78.8mA.
DIMENSIONS: 6cm x 6.5cm x 2.5cm (2.36” x 2.56” 1”) W, D, H.
WEIGHT: 0.1kg (0.22 lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-4PT 19" rack adapter.
|
NPUT: 1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS: 1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT: 2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB): 10MHz (YC to CV).
DIFF. PHASE: 0.3Deg.
DIFF. GAIN: 0.36%.
K-FACTOR: 0.05% (YC to CV).
LUMA S/N RATIO: 79dB.
POWER SOURCE: 12V DC, 110mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.6kg (1.3lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
Input SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs 8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution 10-bit or 8-bit, automatic according to input resolution.
Standards 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization Automatic for up to >30dB cable loss.
Power Source 100-240V AC, 50/60Hz, 14VA.
Dimensions 19" x 7" x 1U W, D, H, rack mountable.
Weight 2.5kg (5.5lbs) approx.
Accessories Power cord.
|
NPUT: s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 4-pin terminal block.
VIDEO BANDWIDTH (-3dB): 14.3MHz, (Y) at 100m.
GAIN RANGE: -2.4 to +6.5 dB (Y), -2.7 to 15.6 dB, (EQ.), -5.8 to +7.8 dB (C).
NON-LINEARITY: 0.07%.
DIFF. GAIN: 0.04%.
VIDEO S/N RATIO: Better than 60dB.
POWER SOURCE: 12V DC, 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.26kg (0.58lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO: 69dB.
BANDWIDTH(-3dB): 20MHz.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.72kg (1.6lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: RK-1 19” rack adapter.
|
COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.
* Bandwidth - 7MHz (- 3dB).
* Inputs - 1 composite video and 1 unbalanced stereo audio.
* Outputs - 1 single signal of the combined audio and composite video.
* Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.
INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.
|
Reviews
There are no reviews yet.