Content |
Input Unbalanced Stereo Audio, 1 Vpp @ 20K ohms, on a 3.5mm stereo miniplug
Output Unbalanced Stereo Audio x2, 1 Vpp @ 150 ohms, on 3.5mm stereo miniplugs
Coupling AC
Audio Bandwidth 100 kHz
Signal to Noise Ratio 71.6 dB
Audio THD 0.017%
Audio Control Left and Right Gain Control
Dimensions 2.36 x 2.56 x 1“
6 x 6.5 x 2.5cm
WxDxH
Weight 0.22 lbs
0.1 kg
Power Source 12 VDC on a AC Power Adapter
|
The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tapeplayer, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.
Technical Specifications
Audio Inputs
|
|
|
TRS1&2
|
Type
|
¼” TRS Passive-Balanced
|
|
Input Impedance
|
2K-5K Ohm (Speaker load and Trim level dependent)
|
|
S/N Ratio
|
Greater than 140dB
|
|
THD+N
|
Less than .0005% (1KHz @ 0dBu)
|
|
Frequency Response
|
Greater than 1MHz
|
AUX
|
|
|
|
Type
|
RCA Active-Unbalanced
|
|
Input Impedance
|
8Kohm
|
|
S/N Ratio
|
Greater than 115dB (1KHz @ 0dBu, Unity gain)
|
|
THD+N
|
Less than .002% (1KHz @ 0dBu, Unity gain)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to +20dB
|
S/PDIF
|
|
|
|
Types
|
RCA 75Ohm-coax and Toslink optical
|
|
Dynamic Range
|
117dB
|
|
THD+N
|
0.0025% (1KHz @ -1dBfs)
|
|
Maximum output
|
+18dBu (Active-Balanced)
|
|
Sample Rates
|
44.1K, 48K, 88.2K, 96K, 176.4K, 192K
|
Audio Outputs
|
|
|
Speakers
|
Type
|
¼” TRS Passive-Balanced
|
|
Type-Mono Activated
|
¼” TRS Active-Impedance Balanced
|
|
Trim Range
|
-90dB to 0dB
|
|
Main Level Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB
|
Main
|
|
|
|
Type
|
¼” TRS Active-Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than 0.0025%
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
Cue
|
|
|
|
Type
|
¼” TRS Active-Impedance Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than .003% (1KHz @ 0dBu)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB (Talkback activated)
|
Headphones
|
|
|
|
Type
|
¼” TRS Active Stereo
|
|
Maximum Output
|
150mW/channel @ 60 Ohm load
|
|
THD+N
|
0.015% (150mW/channel @ 60 Ohm load)
|
|
Frequency Response
|
10Hz-50KHz, +1dB
|
Physical
| |
Main Chassis
| | |
Package Type
|
1U - steel chassis
|
Dimensions
|
19(W) X 1.75(H) X 5.50(D) inches
|
Weight
|
5.0lbs
|
External Power Supply
| | |
Package Type
|
Molded Plastic
|
Dimensions
|
2.5(W) X 2.3(H) X 4.0(D) inches
|
Weight
|
2.5lbs
|
|
INPUT: 1 genlock video, looping, 1Vpp/75Ω, on BNC connectors with a termination switch.
OUTPUTS: 6 black burst signals, 0.3Vpp/75Ω, (sync) 1 color bar output 1Vpp/75Ω. 2 x 1kHz, +4dBu/47Ω outputs on XLR connectors, 2 x 1kHz, 1Vpp/100Ω outputs on RCA connectors.
COLOR BAR: 13 selectable patterns.
PHASE ERROR: 1Deg.
S/N RATIO: 73dB.
CONTROL: H control: +/-1/2 line, 37nS steps; V control: 15.5 lines, 0.5 line steps. SCH control: 360Deg, by front touch switches. RS-232 control.
SYNC OSCILLATOR: Crystal controlled.
SC OSCILLATOR: Crystal controlled.
SYNC/SC: Fully genlocked.
STABILITY: 5ppm.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 10VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.5kg (5.5lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: Kramer distribution amplifiers for additional burst or bar outputs.
|
INPUTS: 1 unbalanced audio stereo, up to 26 Vpp/27kΩ on RCA connectors. 1 balanced audio stereo, up to 25 Vpp/18kΩ on detachable terminal blocks.
OUTPUTS: 1 balanced audio stereo, up to 26 Vpp/50Ω on detachable terminal blocks. 1 unbalanced audio stereo, up to 25 Vpp/100Ω on RCA connectors.
VIDEO BANDWIDTH (-3dB): 50kHz.
GAIN RANGE: -13 to + 5.2 dB (Unbal. to Bal.), -51 to + 6 dB (Bal. to Unbal.) with underside accessible trimmers.
S/N RATIO: 82 dB (balanced to unbalanced), unweighted.
COUPLING: AC.
THD+NOISE: 0.013%.
2nd HARMONIC: 0.001%.
POWER SOURCE: 12 VDC, 150mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.).
Kramer 482 WEIGHT: 0.3 kg (0.66 lbs.) approx.
Kramer 482 ACCESSORIES: Power supply, mounting brackets.
Kramer 482 OPTIONS: Model VA-50P power supply with six 12VDC outlets, RK-T1, RK-T3, 19” rack adapters. |
INPUT: 1 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on a 4-pin connector.
OUTPUTS: 5 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on 4-pin connectors.
MAX. VIDEO OUTPUT: 2Vpp (Y).
VIDEO BANDWIDTH (-3dB): 230MHz (Y).
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.12Deg.
K-FACTOR: |
INPUTS: 4 balanced stereo audio +4dBu/50kΩ on XLR (F) connectors.
OUTPUTS: 20 balanced stereo audio +4dBu/50Ω on XLR (M) connectors.
MAX. OUTPUT LEVEL: 23.8Vpp.
BANDWIDTH (-3dB): >100kHz.
S/N RATIO: 89.3dB.
CROSSTALK: -78dB.
CONTROLS: Level (x4): -0.7dB to +5.1dB, mode selector switches.
COUPLING: AC (input); DC (output).
AUDIO THD + NOISE: 0.081%.
AUDIO 2nd HARMONIC: 0.006%.
POWER SOURCE: 230V AC, (115V AC USA), 15VA.
DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.7lbs) approx.
ACCESSORIES: Power cord, rack "ears“.
|
Reviews
There are no reviews yet.