KRAMER PT-102S 1:2 s-Video Distribution Amplifier

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    150MHz (Y).
DIFF. GAIN:    0.03%.
DIFF. PHASE:    0.03Deg.
K-FACTOR:   

INPUTS:    4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUT:    1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS:    4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH:    40MHz to 3000MHz (+/-3dB).
COUPLING:    AC.
RF GAIN:    +6dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 80mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.32kg (0.71lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUT:    1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs:    1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB):    100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN:    0.7% (YC to CV,NTSC).
DIFF. PHASE:    0.15 Deg. (YC to CV, NTSC).
K-FACTOR:    0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO:    72 dB in both direction, (PAL).
CONTROL:    Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE:    12V DC, 200mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

INPUT:    1 video, 1Vpp/75Ω on an RCA connector.
OUTPUTS:    5 video, 1Vpp/75Ω on RCA connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    400MHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.15Deg.
K-FACTOR:   

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.