| Content |
1:2 COMPOSITE DA The Kramer PT102VN is a Composite or SDI video distribution amplifier. It will take one input, provide correct buffering and isolation and distribute the signal to two identical outputs.
* High Bandwidth - 430MHz (- 3dB).
* Level (Gain) and EQ (Peaking) Controls.
* Ultra-compact - Part of the Kramer PicoTOOLS™ family of extremely compact, high quality and cost effective solutions.
INPUT:1 video, 1Vpp/75? on a BNC connector.OUTPUTS:2 video, 1Vpp/75? on BNC connectors.MAX. VIDEO OUTPUT:2 Vpp.VIDEO BANDWIDTH (-3dB):430MHz.DIFF. GAIN:0.05%.DIFF. PHASE:0.05 Deg.K-FACTOR:0.05%.S/N RATIO:76.1 dB.CONTROL:Gain: -1.2 to +6 dB, EQ.: 0 to +7.5dB @ 50MHz., via trimmers accessible from the front panel.COUPLING:AC.POWER SOURCE:12 VDC, 30 mA.DIMENSIONS:6cm x 6.5cm x 2.5cm (2.36' x 2.56' x 1', W, D, H.).WEIGHT:0.14 kg. (0.31 lbs.) approx.ACCESSORIES:Power supply.OPTIONS:Model VA-50P power supply with six 12VDC outlets.
|
INPUTS: 1 composite video, 1Vpp/75Ω on an RCA connector;1 unbalanced stereo audio, 1Vpp/33kΩ on 3.5-mm mini jack.
OUTPUTS: 3 composite video, 1Vpp/75Ω on RCA connectors; 3 unbalanced stereo audio, 1Vpp/150Ω on 3.5mm mini jacks.
MAX. VIDEO OUTPUT: 2Vpp.
VIDEO BANDWIDTH (-3dB): 320MHz.
AUDIO BANDWIDTH (-3dB): 20kHz.
DIFF. GAIN: 0.1%.
DIFF. PHASE: 0.16Deg.
K-FACTOR: |
Input SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs 8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution 10-bit or 8-bit, automatic according to input resolution.
Standards 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization Automatic for up to >30dB cable loss.
Power Source 100-240V AC, 50/60Hz, 14VA.
Dimensions 19" x 7" x 1U W, D, H, rack mountable.
Weight 2.5kg (5.5lbs) approx.
Accessories Power cord.
|
NPUT: 4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT: 4 video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB): 20MHz.
VIDEO S/N RATIO: 69dB.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA).
DIMENSIONS: 19 " x 7 " x 1U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord.
|
NPUT: s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 4-pin terminal block.
VIDEO BANDWIDTH (-3dB): 14.3MHz, (Y) at 100m.
GAIN RANGE: -2.4 to +6.5 dB (Y), -2.7 to 15.6 dB, (EQ.), -5.8 to +7.8 dB (C).
NON-LINEARITY: 0.07%.
DIFF. GAIN: 0.04%.
VIDEO S/N RATIO: Better than 60dB.
POWER SOURCE: 12V DC, 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.26kg (0.58lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
Input 1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs 4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution 8 or 10-bits, automatic.
Operation Standards 143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking Automatic up to 30dB of cable loss.
Display Power ON LED.
Dimensions (w,d,h) 12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight 0.3kg. (0.67 lbs.) approx.
Power Source 12VDC, 250 mA.
Options RK-T1, RK-T3 rack adapters.
|
Reviews
There are no reviews yet.