KRAMER PT-102VN 1:2 Composite Video Distribution Amplifier

1:2 COMPOSITE DA The Kramer PT102VN is a Composite or SDI video distribution amplifier. It will take one input, provide correct buffering and isolation and distribute the signal to two identical outputs.

    * High Bandwidth - 430MHz (- 3dB).
    * Level (Gain) and EQ (Peaking) Controls.
    * Ultra-compact - Part of the Kramer PicoTOOLS™ family of extremely compact, high quality and cost effective solutions.

INPUT:1 video, 1Vpp/75? on a BNC connector.OUTPUTS:2 video, 1Vpp/75? on BNC connectors.MAX. VIDEO OUTPUT:2 Vpp.VIDEO BANDWIDTH (-3dB):430MHz.DIFF. GAIN:0.05%.DIFF. PHASE:0.05 Deg.K-FACTOR:0.05%.S/N RATIO:76.1 dB.CONTROL:Gain: -1.2 to +6 dB, EQ.: 0 to +7.5dB @ 50MHz., via trimmers accessible from the front panel.COUPLING:AC.POWER SOURCE:12 VDC, 30 mA.DIMENSIONS:6cm x 6.5cm x 2.5cm (2.36' x 2.56' x 1', W, D, H.).WEIGHT:0.14 kg. (0.31 lbs.) approx.ACCESSORIES:Power supply.OPTIONS:Model VA-50P power supply with six 12VDC outlets.

INPUTS:    1 composite video, 1Vpp/75Ω on an RCA connector;1 unbalanced stereo audio, 1Vpp/33kΩ on 3.5-mm mini jack.
OUTPUTS:    3 composite video, 1Vpp/75Ω on RCA connectors; 3 unbalanced stereo audio, 1Vpp/150Ω on 3.5mm mini jacks.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    320MHz.
AUDIO BANDWIDTH (-3dB):    20kHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.16Deg.
K-FACTOR:    

INPUTS:    4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
OUTPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
BANDWIDTH (-3dB):    400MHz (Y).
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.25lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

Input    SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs    8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output    ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution    10-bit or 8-bit, automatic according to input resolution.
Standards    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization    Automatic for up to >30dB cable loss.
Power Source    100-240V AC, 50/60Hz, 14VA.
Dimensions     19" x 7" x 1U W, D, H, rack mountable.
Weight     2.5kg (5.5lbs) approx.
Accessories    Power cord.

INPUTS:    4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter