Content |
INPUT: 1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS: 4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH: 40MHz to 3000MHz (+/-3dB).
COUPLING: AC.
RF GAIN: +6dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.32kg (0.71lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
Input 1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs 4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution 8 or 10-bits, automatic.
Operation Standards 143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking Automatic up to 30dB of cable loss.
Display Power ON LED.
Dimensions (w,d,h) 12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight 0.3kg. (0.67 lbs.) approx.
Power Source 12VDC, 250 mA.
Options RK-T1, RK-T3 rack adapters.
|
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL: 1.4Vpp.
VIDEO BANDWIDTH (-3dB): 160MHz (Y).
NON-LINEARITY: 0.05%.
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.08Deg.
K-FACTOR: 0.1%.
VIDEO S/N RATIO: Better than 80dB (Y channel).
POWER SOURCE: 12V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUT: 1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs: 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB): 100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN: 0.7% (YC to CV,NTSC).
DIFF. PHASE: 0.15 Deg. (YC to CV, NTSC).
K-FACTOR: 0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO: 72 dB in both direction, (PAL).
CONTROL: Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE: 12V DC, 200mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
INPUTS: 1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector
OUTPUT: 1 balanced, 150Ω on a 6/4 standard telephone socket.
BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors
NON-LINEARITY (PAIR): Less 0.2% at short distances
DIFF. GAIN (PAIR): 0.41%.
DIFF. PHASE (PAIR): 0.3 Deg.
K-FACTOR (@ 20m, PAIR): 0.1%.
S/N RATIO (PAIR): 72 dB.
CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.
POWER SOURCE: 12 VDC 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28 kg. (0.62 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters
|
COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.
* Bandwidth - 7MHz (- 3dB).
* Inputs - 1 composite video and 1 unbalanced stereo audio.
* Outputs - 1 single signal of the combined audio and composite video.
* Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.
INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.
|
Reviews
There are no reviews yet.