KRAMER 105S 1:5 s-Video Distribution Amplifier

INPUT:    1 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on a 4-pin connector.
OUTPUTS:    5 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on 4-pin connectors.
MAX. VIDEO OUTPUT:    2Vpp (Y).
VIDEO BANDWIDTH (-3dB):    230MHz (Y).
DIFF. GAIN:    0.08%.
DIFF. PHASE:    0.12Deg.
K-FACTOR:   

INPUT:    1 mono microphone, 5mVpp/10kΩ on a 6.5mm phone jack.
OUTPUTS:    4 mono line level, 1Vpp/150Ω on 6.5mm phone jacks.
MAX. OUTPUT LEVEL:    4.8Vpp.
AUDIO BANDWIDTH (-3dB):    37kHz.
GAIN CONTROL:    5dB to 54dB.
S/N RATIO:    78dB.
THD @1kHz:    0.1%.
POWER SOURCE:    12V DC, 20mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUTS:    1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector; 1 TOSLINK® optical;1 balanced digital audio AES/EBU on a detachable terminal block;1 twisted pair on a detachable terminal block.
OUTPUTS:    1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector;1 TOSLINK® optical;1 balanced digital audio AES/EBU on CAT 5 on a detachable terminal block;2 twisted pairs on detachable terminal blocks.
SAMPLING:    32, 44.1, 48, 96, 192kHz sampling frequencies.
STANDARDS:    IEC 60958, S/PDIF, EIAJ CP1201 and AES/EBU interface standards, as well as multi-channel standards.
CONTROL:    Input select, local or twisted-pair selector, system bit selector.
POWER SOURCE:    5V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98“) W, D, H.
WEIGHT:    0.25kg (0.6lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-T3 19” rack adapter.

INPUTS:    1 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors; 1 mono microphone, 5mV/3.2kΩ (condenser) 4.8kΩ (dynamic) with a type selector, on a 6.5mm phone jack.
OUTPUTS:    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output.
MAX. OUTPUT LEVEL:    8Vpp at Hi-Z load (headphones).
BANDWIDTH (-3dB):    37kHz.
S/N RATIO:    74dB.
CONTROLS:    Input selector switch, bass +/-10dB @100Hz, treble +/-12dB @10kHz, volume, balance.
COUPLING:    AC.
AUDIO THD + NOISE:    0.04%.
AUDIO 2nd HARMONIC:    0.24%.
CROSSTALK:    -60dB @1kHz, 20kHz.
POWER SOURCE:    12V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5 cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.66 lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUT:    1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack; 3 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors.
OUTPUTS:    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in.
BANDWIDTH (-3dB):    20kHz.
S/N RATIO:    68dB unweighted.
CONTROL:    Input selector switches: bass (70Hz.), mid (1kHz), treble (15kHz): +/-15dB; volume, balance, and loudness controls.
OUTPUT POWER:    4.5W RMS per channel into 4Ω @15V supply.
THD+NOISE:    0.059% @1kHz, 1V.
2nd HARMONIC:    0.025%.
POWER SOURCE:    12-15V DC, 22V max, up to 1A.
DIMENSIONS:    19cm x 13.5cm x 2.5cm (7.5” x 5.3” x 0.98”) W, D, H.
WEIGHT:    0.6kg (1.32lbs) approx.
ACCESSORIES:    Power supply.
OPTIONS:    RK-T2B 19" rack adapter.

The TP-105 and TP-105HD are line drivers and distribution amplifiers for twisted pair signals. They take a twisted pair input and distribute it to 2 identical twisted pair outputs.

• Max. Resolution - WUXGA & 1080p (TP-105HD).
• Twisted Pair Output - RJ-45 connectors.
• Level (Gain) and EQ (Peaking) Controls.
• System Range - Up to 100 meters (320ft).
• Power Connect System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
• HDTV Compatible (TP-105HD).
• Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.