Content |
INPUTS: 2 balanced stereo audio +4dBu/50kΩ on XLR (F) connectors.
OUTPUTS: 10 balanced stereo audio +4dBu/50Ω on XLR (M) connectors.
MAX. OUTPUT LEVEL: 23.8Vpp.
BANDWIDTH (-3dB): >100kHz.
S/N RATIO: 89.3dB.
CROSSTALK: -78dB.
CONTROLS: Level (x2): -0.7dB to +5.1dB, mode selector switches.
COUPLING: AC (input); DC (output).
AUDIO THD + NOISE: 0.081%.
AUDIO 2nd HARMONIC: 0.006%.
POWER SOURCE: 230V AC, (115V AC USA), 6VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.6kg (5.7lbs) approx.
ACCESSORIES: Power cord.
|
The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tapeplayer, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.
Technical Specifications
Audio Inputs
|
|
|
TRS1&2
|
Type
|
¼” TRS Passive-Balanced
|
|
Input Impedance
|
2K-5K Ohm (Speaker load and Trim level dependent)
|
|
S/N Ratio
|
Greater than 140dB
|
|
THD+N
|
Less than .0005% (1KHz @ 0dBu)
|
|
Frequency Response
|
Greater than 1MHz
|
AUX
|
|
|
|
Type
|
RCA Active-Unbalanced
|
|
Input Impedance
|
8Kohm
|
|
S/N Ratio
|
Greater than 115dB (1KHz @ 0dBu, Unity gain)
|
|
THD+N
|
Less than .002% (1KHz @ 0dBu, Unity gain)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to +20dB
|
S/PDIF
|
|
|
|
Types
|
RCA 75Ohm-coax and Toslink optical
|
|
Dynamic Range
|
117dB
|
|
THD+N
|
0.0025% (1KHz @ -1dBfs)
|
|
Maximum output
|
+18dBu (Active-Balanced)
|
|
Sample Rates
|
44.1K, 48K, 88.2K, 96K, 176.4K, 192K
|
Audio Outputs
|
|
|
Speakers
|
Type
|
¼” TRS Passive-Balanced
|
|
Type-Mono Activated
|
¼” TRS Active-Impedance Balanced
|
|
Trim Range
|
-90dB to 0dB
|
|
Main Level Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB
|
Main
|
|
|
|
Type
|
¼” TRS Active-Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than 0.0025%
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
Cue
|
|
|
|
Type
|
¼” TRS Active-Impedance Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than .003% (1KHz @ 0dBu)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB (Talkback activated)
|
Headphones
|
|
|
|
Type
|
¼” TRS Active Stereo
|
|
Maximum Output
|
150mW/channel @ 60 Ohm load
|
|
THD+N
|
0.015% (150mW/channel @ 60 Ohm load)
|
|
Frequency Response
|
10Hz-50KHz, +1dB
|
Physical
| |
Main Chassis
| | |
Package Type
|
1U - steel chassis
|
Dimensions
|
19(W) X 1.75(H) X 5.50(D) inches
|
Weight
|
5.0lbs
|
External Power Supply
| | |
Package Type
|
Molded Plastic
|
Dimensions
|
2.5(W) X 2.3(H) X 4.0(D) inches
|
Weight
|
2.5lbs
|
|
INPUTS: 1 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors; 1 mono microphone, 5mV/3.2kΩ (condenser) 4.8kΩ (dynamic) with a type selector, on a 6.5mm phone jack.
OUTPUTS: Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output.
MAX. OUTPUT LEVEL: 8Vpp at Hi-Z load (headphones).
BANDWIDTH (-3dB): 37kHz.
S/N RATIO: 74dB.
CONTROLS: Input selector switch, bass +/-10dB @100Hz, treble +/-12dB @10kHz, volume, balance.
COUPLING: AC.
AUDIO THD + NOISE: 0.04%.
AUDIO 2nd HARMONIC: 0.24%.
CROSSTALK: -60dB @1kHz, 20kHz.
POWER SOURCE: 12V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5 cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.3kg (0.66 lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
NPUT: 1 balanced audio stereo: +4dBu/100kΩ on detachable terminal blocks.
OUTPUTS: 3 balanced audio stereo: +4dBu/150Ω on detachable terminal blocks.
MAX. OUTPUT LEVEL: 20dBu.
BANDWIDTH (-3dB): >100kHz.
S/N RATIO: 87.6dB.
CONTROL: Output level control: -0.5dB to +8.6dB.
COUPLING: DC.
AUDIO THD + NOISE: 0.024%.
POWER SOURCE: 12V DC 40mA.
DIMENSIONS: 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply.
OPTIONS: RK-SM 19" rack adapter.
|
INPUT: 1 equalized digital audio, 110Ω on detachable terminal block, transformer coupled.
OUTPUTS: 4 x reclocked digital audio, 110Ω on detachable terminal block, transformer coupled.
SAMPLING: 32, 44.1, 48, 96kHz sampling frequencies.
STANDARDS: AES/EBU, IEC 958, S/PDIF and EIAJ CP340/1201.
EQUALIZATION: Automatic up to 200mV eye pattern.
DISPLAY: Power ON LED.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.3kg (0.67lbs) approx.
POWER SOURCE: 12V DC, 100 mA.
ACCESSORIES: Power supply.
OPTIONS: RK-3T 19” rack adapter.
|
The TP-105 and TP-105HD are line drivers and distribution amplifiers for twisted pair signals. They take a twisted pair input and distribute it to 2 identical twisted pair outputs.
Features & Benefits
- Max. Resolution - WUXGA & 1080p (TP-105HD).
- Twisted Pair Output - RJ-45 connectors.
- Level (Gain) and EQ (Peaking) Controls.
- System Range - Up to 100 meters (320ft).
- Power Connect System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
- HDTV Compatible (TP-105HD).
- Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
|
Reviews
There are no reviews yet.