KRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier

1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3' VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical outputs.

    * High Bandwidth - 400MHz (- 3dB).
    * HDTV Compatible.
    * ID Bit Control.
    * Advanced Sync Processing - Ensures compatibility with a wide range of computers.
    * Selectable Sync Input Impedance - 75? (video), 510? (Graphics/TTL).
    * 3ft 15-pin HD Cable Included.
    * Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

INPUT:1 analog red, green, blue signals - 0.7 Vpp/75?, H & V sync, TTL level, on HD15F connectors.OUTPUTS:2 analog red, green, blue signals - 0.7 Vpp/75? H & V sync, TTL level, on HD15F connectors.MAX. OUTPUT LEVEL:1.8 Vpp.BANDWIDTH (-3dB):400MHz.DIFF. GAIN:0.03%.DIFF. PHASE:0.07 Deg.K-FACTOR:0.05%.S/N RATIO:72dB.CONTROLS:Pair of switches for Hs (Horizontal Sync) and Vs (Vertical Sync) on the underside; ID Bit switch on the underside.COUPLING:DC.POWER SOURCE:12 VDC, 95 mA.DIMENSIONS:12cm x 7.5cm x 2.5cm (4.7' x 2.95' x 0.98'), W, D, H.WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:Power supply, mounting bracket.OPTIONS:19' rack adapters RK-T1, RK-T3.

INPUTS:    4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
OUTPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
BANDWIDTH (-3dB):    400MHz (Y).
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.25lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.

Input    Composite video, 1Vpp/75? on a BNC connector.
Output    Optic Fiber ST connector.
Operation Distance    Up to 5km (MultiMode).
Video Bandwidth (-3Db)    55 MHz. 20 MHz.
Diff. Gain    0.4%.
Video S/N Ratio    60 dB.
Non-Linearity    0.6%
Power Source    12 VDC 80mA.
Dimensions     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight     0.27 kg. (0.59 lbs.) approx.
Accessories    Power supply, mounting bracket.
Options    RK-T1, RK-T3, 19” rack adapters.

INPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    1 composite or single component video, 1Vpp/75Ω on a BNC connector.
BANDWIDTH (-3dB):    400MHz.
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

Input    SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs    8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output    ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution    10-bit or 8-bit, automatic according to input resolution.
Standards    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization    Automatic for up to >30dB cable loss.
Power Source    100-240V AC, 50/60Hz, 14VA.
Dimensions     19" x 7" x 1U W, D, H, rack mountable.
Weight     2.5kg (5.5lbs) approx.
Accessories    Power cord.