KRAMER VP-200N 1:2 Computer Graphics Video Distribution Amplifier

1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3' VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical outputs.

    * High Bandwidth - 400MHz (- 3dB).
    * HDTV Compatible.
    * ID Bit Control.
    * Advanced Sync Processing - Ensures compatibility with a wide range of computers.
    * Selectable Sync Input Impedance - 75? (video), 510? (Graphics/TTL).
    * 3ft 15-pin HD Cable Included.
    * Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

INPUT:1 analog red, green, blue signals - 0.7 Vpp/75?, H & V sync, TTL level, on HD15F connectors.OUTPUTS:2 analog red, green, blue signals - 0.7 Vpp/75? H & V sync, TTL level, on HD15F connectors.MAX. OUTPUT LEVEL:1.8 Vpp.BANDWIDTH (-3dB):400MHz.DIFF. GAIN:0.03%.DIFF. PHASE:0.07 Deg.K-FACTOR:0.05%.S/N RATIO:72dB.CONTROLS:Pair of switches for Hs (Horizontal Sync) and Vs (Vertical Sync) on the underside; ID Bit switch on the underside.COUPLING:DC.POWER SOURCE:12 VDC, 95 mA.DIMENSIONS:12cm x 7.5cm x 2.5cm (4.7' x 2.95' x 0.98'), W, D, H.WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:Power supply, mounting bracket.OPTIONS:19' rack adapters RK-T1, RK-T3.

INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket.  OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters

INPUT:    Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable.
OUTPUT:    Composite Video 1Vpp/75Ω on a BNC connector.
OPERATION DISTANCE:    Up to 5km (MultiMode).
VIDEO BANDWIDTH (-3dB):    55 MHz. 20 MHz.
DIFF. GAIN:    0.4%.
VIDEO S/N RATIO:    60 dB.
NON-LINEARITY:    0.6%
POWER SOURCE:    12V DC 80mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT:    0.27 kg. (0.59 lbs.) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

INPUTS:    1 composite video, 1Vpp/75Ω on an RCA connector;1 unbalanced stereo audio, 1Vpp/33kΩ on 3.5-mm mini jack.
OUTPUTS:    3 composite video, 1Vpp/75Ω on RCA connectors; 3 unbalanced stereo audio, 1Vpp/150Ω on 3.5mm mini jacks.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    320MHz.
AUDIO BANDWIDTH (-3dB):    20kHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.16Deg.
K-FACTOR:    

NPUT:    1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS:    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT:    2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB):    10MHz (YC to CV).
DIFF. PHASE:    0.3Deg.
DIFF. GAIN:    0.36%.
K-FACTOR:    0.05% (YC to CV).
LUMA S/N RATIO:    79dB.
POWER SOURCE:    12V DC, 110mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.6kg (1.3lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.