Content |
1:2 XGA DA. DC COUPLED. SELECTABLE SYNC IMPEDANCE. INCLUDES 3' VGA CABLE. The VP-200N, VP-300N, and VP-400N are high performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input, provides correct buffering and isolation, and distributes the signal to two, three, or four identical outputs.
* High Bandwidth - 400MHz (- 3dB).
* HDTV Compatible.
* ID Bit Control.
* Advanced Sync Processing - Ensures compatibility with a wide range of computers.
* Selectable Sync Input Impedance - 75? (video), 510? (Graphics/TTL).
* 3ft 15-pin HD Cable Included.
* Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
INPUT:1 analog red, green, blue signals - 0.7 Vpp/75?, H & V sync, TTL level, on HD15F connectors.OUTPUTS:2 analog red, green, blue signals - 0.7 Vpp/75? H & V sync, TTL level, on HD15F connectors.MAX. OUTPUT LEVEL:1.8 Vpp.BANDWIDTH (-3dB):400MHz.DIFF. GAIN:0.03%.DIFF. PHASE:0.07 Deg.K-FACTOR:0.05%.S/N RATIO:72dB.CONTROLS:Pair of switches for Hs (Horizontal Sync) and Vs (Vertical Sync) on the underside; ID Bit switch on the underside.COUPLING:DC.POWER SOURCE:12 VDC, 95 mA.DIMENSIONS:12cm x 7.5cm x 2.5cm (4.7' x 2.95' x 0.98'), W, D, H.WEIGHT:0.3 kg. (0.67 lbs.) approx.ACCESSORIES:Power supply, mounting bracket.OPTIONS:19' rack adapters RK-T1, RK-T3.
|
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL: 1.4Vpp.
VIDEO BANDWIDTH (-3dB): 160MHz (Y).
NON-LINEARITY: 0.05%.
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.08Deg.
K-FACTOR: 0.1%.
VIDEO S/N RATIO: Better than 80dB (Y channel).
POWER SOURCE: 12V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters
|
INPUTS: 1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector
OUTPUT: 1 balanced, 150Ω on a 6/4 standard telephone socket.
BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors
NON-LINEARITY (PAIR): Less 0.2% at short distances
DIFF. GAIN (PAIR): 0.41%.
DIFF. PHASE (PAIR): 0.3 Deg.
K-FACTOR (@ 20m, PAIR): 0.1%.
S/N RATIO (PAIR): 72 dB.
CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.
POWER SOURCE: 12 VDC 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28 kg. (0.62 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters
|
INPUT: 1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs: 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB): 100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN: 0.7% (YC to CV,NTSC).
DIFF. PHASE: 0.15 Deg. (YC to CV, NTSC).
K-FACTOR: 0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO: 72 dB in both direction, (PAL).
CONTROL: Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE: 12V DC, 200mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
INPUT: 1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS: 4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH: 40MHz to 3000MHz (+/-3dB).
COUPLING: AC.
RF GAIN: +6dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.32kg (0.71lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
Reviews
There are no reviews yet.