KRAMER VM-3Sxl 1:3 s-Video Distribution Amplifier

Input    HDMI Connector.
Outputs    16 HDMI Connectors.
Bandwidth    Supports up to 1.65Gbps per graphic channel
Compliance With Hdmi Standard    Supports HDMI 1.0 and HDCP
Controls    SELECT and READ buttons for selecting and storing EDID information
Indicator Leds    OUTPUT STATUS 1 to 16
Power Source    100-264 VAC, 50/60Hz 25VA
Dimensions     19-inch (W), 7-inch (D), 1U (H)
Weight     4.5kg. (9.9lbs.) approx.
Accessories    Power cord
Options    HDMI/HDMI male-to-male cables

NPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    4 video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB):    20MHz.
VIDEO S/N RATIO:    69dB.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA).
DIMENSIONS:    19 " x 7 " x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

INPUT:    1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT:    1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO:    69dB.
BANDWIDTH(-3dB):    20MHz.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.72kg (1.6lbs) approx.
ACCESSORIES:    Power cord.
OPTIONS:    RK-1 19” rack adapter.

INPUTS:     1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector      
OUTPUT:     1 balanced, 150Ω on a 6/4 standard telephone socket.      
BANDWIDTH (PAIR):     Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors      
NON-LINEARITY (PAIR):     Less 0.2% at short distances      
DIFF. GAIN (PAIR):     0.41%.      
DIFF. PHASE (PAIR):     0.3 Deg.      
K-FACTOR (@ 20m, PAIR):     0.1%.      
S/N RATIO (PAIR):     72 dB.      
CONTROLS:     Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.      
POWER SOURCE:     12 VDC 40mA.      
DIMENSIONS:     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)      
WEIGHT:     0.28 kg. (0.62 lbs.) approx.      
ACCESSORIES:     Power supply, mounting bracket.      
OPTIONS:     Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters