| Content |
INPUT: 4 balanced +4dBu/50kΩ on female XLR connectors; 4 unbalanced 1Vpp/50kΩ on RCA connectors.
OUTPUT: 4 unbalanced 1Vpp/49Ω on RCA connectors; 4 balanced +4dBu/49Ω on male XLR connectors.
MAX. OUTPUT: 18Vpp.
BANDWIDTH (-3dB): 30kHz.
S/N RATIO: Better than 89dB.
THD: Less than 0.02%.
POWER SOURCE: 115-230V AC, 50/60Hz, 3.7VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.4kg (5.3lbs) approx.
ACCESSORIES: Power cord. | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
Overview
Dial in YOUR mix exactly as YOU want it, in Real Time.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
Recommended for: Portable, Tour.
Features
- 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
- 16 Preset Locations for Mix & Configuration Recall
- LCD Display with 16 Channel Metering
- Built-In Lexicon© Reverb
- dbx PeakStopPlus™ Limiting
- Global High & Low EQ
- Global Master Level Control
- Global Stereo Width Control
- BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
- XLR & 1/4” Stereo or Mono Outputs
- 1/8” & 1/4” Headphone Outputs
- Setup Wizard for Easy Configuration
- Supports 48 kHz & 96 kHz Sampling Rates
- Channel Linking, Grouping, & Multi-Select Capabilities
- Supports up to 60 PMC16s on a Single BLU Link Ring
- Built-In Sturdy Mic Stand Mount
- USB Port for Firmware Updates
|
Wireless 5.8 GHz Stereo Transmitter
- For wireless transmission of a stereo audio signal
- Maximum range: 30 m
- One transmitter can be paired with up to 8 receivers
- Inputs: 2x XLR female or 2x 6.3 mm jack (unbalanced)
- Switch for mono/stereo operation
- Volume control
- Dimensions without antenna (L x W x H): 115 x 105 x 45 mm
- Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket
|
AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
Optional X-Video expansion card to provide master video sync generator
Realtime format conversion between all digital formats
Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
Three stage Termination Sensing for each word clock output
INPUTS
2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
S/PDIF optical on TOS-LINK 44.1-48k
S/PDIF coaxial on RCA 44.1-192k
ADAT 44.1-48k
ADAT/SMUX II for 88.2-96k
ADAT/SMUX IV for 176.4-192k
Word Clock BNC 44.1 –192k
Video
Optional video sync (X-Video card)
OUTPUTS
2 x AES-EBU on XLR single or double wide 44.1-192k
S/PDIF coaxial 44.1-192k
S/PDIF optical on TOS-LINK 44.1-48k
6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
ADAT
SMUX II
SMUX IV
Optional video sync (X-Video card)
SPECS
Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
Video: PAL/NTSC/60Hz
"SuperClock" (256fs)
Pull up/down 0.1% and 4% from any sample rate
Apogee´s new Ultra Low Jitter C777 clock
Three stage termination indicator (under/correct/over) on each
Word Clock output:
"SureLock" technology for drop out prevention
4 digit numeric true sample rate indication
Universal power: 15 W 90-250 VAC 50-60 HZ
Connection:
Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
Operating System:
Mac and Windows
|
mic/line for the BLU-80, BLU-32, BLU-16. |
Reviews
There are no reviews yet.