| Content |
INPUTS: 4 video, 1Vpp/75Ω on RCA connectors.
OUTPUT: 1 composite or single component video, 1Vpp/75Ω on an RCA connector.
BANDWIDTH (-3dB): 400MHz.
SWITCHING SYSTEM: Mechanical, break-before-make.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
INPUTS: 1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector
OUTPUT: 1 balanced, 150Ω on a 6/4 standard telephone socket.
BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors
NON-LINEARITY (PAIR): Less 0.2% at short distances
DIFF. GAIN (PAIR): 0.41%.
DIFF. PHASE (PAIR): 0.3 Deg.
K-FACTOR (@ 20m, PAIR): 0.1%.
S/N RATIO (PAIR): 72 dB.
CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.
POWER SOURCE: 12 VDC 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28 kg. (0.62 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters
|
NPUT: s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 4-pin terminal block.
VIDEO BANDWIDTH (-3dB): 14.3MHz, (Y) at 100m.
GAIN RANGE: -2.4 to +6.5 dB (Y), -2.7 to 15.6 dB, (EQ.), -5.8 to +7.8 dB (C).
NON-LINEARITY: 0.07%.
DIFF. GAIN: 0.04%.
VIDEO S/N RATIO: Better than 60dB.
POWER SOURCE: 12V DC, 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.26kg (0.58lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO: 69dB.
BANDWIDTH(-3dB): 20MHz.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.72kg (1.6lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: RK-1 19” rack adapter.
|
Input 1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs 4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution 8 or 10-bits, automatic.
Operation Standards 143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking Automatic up to 30dB of cable loss.
Display Power ON LED.
Dimensions (w,d,h) 12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight 0.3kg. (0.67 lbs.) approx.
Power Source 12VDC, 250 mA.
Options RK-T1, RK-T3 rack adapters.
|
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT: 2Vpp.
VIDEO BANDWIDTH (-3dB): 150MHz (Y).
DIFF. GAIN: 0.03%.
DIFF. PHASE: 0.03Deg.
K-FACTOR: |
Reviews
There are no reviews yet.