Content |
INPUTS: 8 video, 1Vpp/75Ω on BNC connectors; 8 unbalanced stereo audio on RCA connectors.
OUTPUTS: 1 video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio on an RCA connector.
BANDWIDTH (-3dB): Video: 400MHz; audio: 100kHz.
SWITCHING SYSTEM: Mechanical, break-before-make.
CROSSPOINTS: 1 of 8.
SIGNAL LEVELS: Up to 3Vpp video, +30dBu audio.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 1.5kg (3.3lbs) approx.
|
INPUT: 1 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on a 4-pin connector.
OUTPUTS: 5 s-Video: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on 4-pin connectors.
MAX. VIDEO OUTPUT: 2Vpp (Y).
VIDEO BANDWIDTH (-3dB): 230MHz (Y).
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.12Deg.
K-FACTOR: |
The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tapeplayer, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.
Technical Specifications
Audio Inputs
|
|
|
TRS1&2
|
Type
|
¼” TRS Passive-Balanced
|
|
Input Impedance
|
2K-5K Ohm (Speaker load and Trim level dependent)
|
|
S/N Ratio
|
Greater than 140dB
|
|
THD+N
|
Less than .0005% (1KHz @ 0dBu)
|
|
Frequency Response
|
Greater than 1MHz
|
AUX
|
|
|
|
Type
|
RCA Active-Unbalanced
|
|
Input Impedance
|
8Kohm
|
|
S/N Ratio
|
Greater than 115dB (1KHz @ 0dBu, Unity gain)
|
|
THD+N
|
Less than .002% (1KHz @ 0dBu, Unity gain)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to +20dB
|
S/PDIF
|
|
|
|
Types
|
RCA 75Ohm-coax and Toslink optical
|
|
Dynamic Range
|
117dB
|
|
THD+N
|
0.0025% (1KHz @ -1dBfs)
|
|
Maximum output
|
+18dBu (Active-Balanced)
|
|
Sample Rates
|
44.1K, 48K, 88.2K, 96K, 176.4K, 192K
|
Audio Outputs
|
|
|
Speakers
|
Type
|
¼” TRS Passive-Balanced
|
|
Type-Mono Activated
|
¼” TRS Active-Impedance Balanced
|
|
Trim Range
|
-90dB to 0dB
|
|
Main Level Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB
|
Main
|
|
|
|
Type
|
¼” TRS Active-Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than 0.0025%
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
Cue
|
|
|
|
Type
|
¼” TRS Active-Impedance Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than .003% (1KHz @ 0dBu)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB (Talkback activated)
|
Headphones
|
|
|
|
Type
|
¼” TRS Active Stereo
|
|
Maximum Output
|
150mW/channel @ 60 Ohm load
|
|
THD+N
|
0.015% (150mW/channel @ 60 Ohm load)
|
|
Frequency Response
|
10Hz-50KHz, +1dB
|
Physical
| |
Main Chassis
| | |
Package Type
|
1U - steel chassis
|
Dimensions
|
19(W) X 1.75(H) X 5.50(D) inches
|
Weight
|
5.0lbs
|
External Power Supply
| | |
Package Type
|
Molded Plastic
|
Dimensions
|
2.5(W) X 2.3(H) X 4.0(D) inches
|
Weight
|
2.5lbs
|
|
INPUTS: 1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector; 1 TOSLINK® optical;1 balanced digital audio AES/EBU on a detachable terminal block;1 twisted pair on a detachable terminal block.
OUTPUTS: 1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector;1 TOSLINK® optical;1 balanced digital audio AES/EBU on CAT 5 on a detachable terminal block;2 twisted pairs on detachable terminal blocks.
SAMPLING: 32, 44.1, 48, 96, 192kHz sampling frequencies.
STANDARDS: IEC 60958, S/PDIF, EIAJ CP1201 and AES/EBU interface standards, as well as multi-channel standards.
CONTROL: Input select, local or twisted-pair selector, system bit selector.
POWER SOURCE: 5V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98“) W, D, H.
WEIGHT: 0.25kg (0.6lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-T3 19” rack adapter.
|
INPUTS: 16 balanced stereo audio, +4dBu/10kΩ on detachable terminal blocks.
OUTPUTS: 16 balanced stereo audio, +4dBu/50Ω on detachable terminal blocks.
MAX. OUTPUT LEVEL: 20Vpp.
BANDWIDTH (-3dB): 100kHz.
S/N RATIO: 82.2dB unweighted.
CROSSTALK: -80dB @1kHz.
CONTROL: Front panel buttons, RS-232, RS-485, contact closure, & IR remote (included).
COUPLING: AC.
AUDIO THD + NOISE: 0.04%.
AUDIO 2nd HARMONIC: 0.002% @1kHz.
POWER SOURCE: 115/230V AC, 50/60Hz, 23VA.
DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord, Windows®-based Kramer control software, null-modem adapter, rack "ears“.
|
INPUTS: 4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks.
OUTPUTS: 4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks.
MAX OUTPUT LEVEL: 5.2Vpp (+7dBu).
AUDIO BANDWIDTH (-3dB): 100kHz.
S/N RATIO: 90dB.
CROSSTALK: -79dB @1kHz.
THD @1kHz: 0.018%.
2nd HARMONIC: 0.002%.
POWER SOURCE: 12V DC, 20mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
Reviews
There are no reviews yet.