KRAMER TP-120 Computer Graphics Video over Twisted Pair Receive

INPUT:    1 RJ-45 line in.
OUTPUT:    1 VGA/UXGA on a 15-pin HD connector.
MAX. OUTPUT LEVEL:    1.4Vpp.
MAX. RESOLUTION:    WUXGA & 1080p.
S/N RATIO:    80dB.
CONTROLS:    -10.3dB to +1.7dB 60m, level; 0dB to +35dBu 100m, EQ.
COUPLING:    AC.
POWER SOURCE:    12V DC, 160mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98“) W, D, H.
WEIGHT:    0.3kg (0.66lbs) approx.
ACCESSORIES:    Power supply.
OPTIONS:    RK-3T 19" rack adapter.

INPUT:    1 video, 1Vpp/75Ω on an RCA connector.
OUTPUTS:    5 video, 1Vpp/75Ω on RCA connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    400MHz.
DIFF. GAIN:    0.1%.
DIFF. PHASE:    0.15Deg.
K-FACTOR:   

NPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    4 video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB):    20MHz.
VIDEO S/N RATIO:    69dB.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA).
DIMENSIONS:    19 " x 7 " x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT:    2Vpp.
VIDEO BANDWIDTH (-3dB):    150MHz (Y).
DIFF. GAIN:    0.03%.
DIFF. PHASE:    0.03Deg.
K-FACTOR: