KRAMER 466 Digital Audio Transcoder

INPUTS:    1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector; 1 TOSLINK® optical;1 balanced digital audio AES/EBU on a detachable terminal block;1 twisted pair on a detachable terminal block.
OUTPUTS:    1 digital audio AES-3id on a BNC connector;1 S/PDIF digital audio on an RCA connector;1 TOSLINK® optical;1 balanced digital audio AES/EBU on CAT 5 on a detachable terminal block;2 twisted pairs on detachable terminal blocks.
SAMPLING:    32, 44.1, 48, 96, 192kHz sampling frequencies.
STANDARDS:    IEC 60958, S/PDIF, EIAJ CP1201 and AES/EBU interface standards, as well as multi-channel standards.
CONTROL:    Input select, local or twisted-pair selector, system bit selector.
POWER SOURCE:    5V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98“) W, D, H.
WEIGHT:    0.25kg (0.6lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-T3 19” rack adapter.

INPUTS:    1 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors; 1 mono microphone, 5mV/3.2kΩ (condenser) 4.8kΩ (dynamic) with a type selector, on a 6.5mm phone jack.
OUTPUTS:    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output.
MAX. OUTPUT LEVEL:    8Vpp at Hi-Z load (headphones).
BANDWIDTH (-3dB):    37kHz.
S/N RATIO:    74dB.
CONTROLS:    Input selector switch, bass +/-10dB @100Hz, treble +/-12dB @10kHz, volume, balance.
COUPLING:    AC.
AUDIO THD + NOISE:    0.04%.
AUDIO 2nd HARMONIC:    0.24%.
CROSSTALK:    -60dB @1kHz, 20kHz.
POWER SOURCE:    12V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5 cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.66 lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

INPUTS:    1 unbalanced stereo audio 1Vpp/50kΩ on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50kΩ on RCA connectors.
OUTPUTS:    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in.
OUTPUT POWER:    2x10W (4Ω).
OUTPUT MUSIC POWER:    2x40W (4Ω).
BANDWIDTH (-3dB):    20kHz.
S/N RATIO:    77dB @1kHz.
CROSSTALK:    -73dB @1kHz, all hostile.
CONTROLS:    Input selector switches: bass (70Hz), mid (1kHz), treble (15kHz): +/-13dB; volume, balance and loudness controls.
COUPLING:    AC.
AUDIO THD + NOISE:    0.5%.
AUDIO 2nd HARMONIC:    0.3%.
POWER SOURCE:    12V DC, up to 2.5A.
DIMENSIONS:    19cm x 13.5cm x 2.5cm (7.5” x 5.3” x 0.98”) W, D, H.
WEIGHT:    0.6kg (1.32lbs) approx.
ACCESSORIES:    Power supply.
OPTIONS:    RK-T2B 19" rack adapter.

INPUTS:    8 unbalanced stereo audio, on RCA type connectors.
OUTPUT:    1 unbalanced stereo audio, on RCA type connectors.
SWITCHING SYSTEM:    Mechanical, break-before-make.
CROSSPOINTS:    1 of 8.
SIGNAL LEVELS:    Up to +30dBu.
BANDWIDTH(-3dB):    25kHz.
DIMENSIONS:    18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
OPTIONS:    RK-81 19” rack adapter.

INPUT:    1 genlock video, looping, 1Vpp/75Ω, on BNC connectors with a termination switch.
OUTPUTS:    6 black burst signals, 0.3Vpp/75Ω, (sync) 1 color bar output 1Vpp/75Ω. 2 x 1kHz, +4dBu/47Ω outputs on XLR connectors, 2 x 1kHz, 1Vpp/100Ω outputs on RCA connectors.
COLOR BAR:    13 selectable patterns.
PHASE ERROR:    1Deg.
S/N RATIO:    73dB.
CONTROL:    H control: +/-1/2 line, 37nS steps; V control: 15.5 lines, 0.5 line steps. SCH control: 360Deg, by front touch switches. RS-232 control.
SYNC OSCILLATOR:    Crystal controlled.
SC OSCILLATOR:    Crystal controlled.
SYNC/SC:    Fully genlocked.
STABILITY:    5ppm.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA) 10VA.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    2.5kg (5.5lbs) approx.
ACCESSORIES:    Power cord.
OPTIONS:    Kramer distribution amplifiers for additional burst or bar outputs.

The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tapeplayer, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output. Technical Specifications