Content |
INPUTS: 8 unbalanced stereo audio, on RCA type connectors.
OUTPUT: 1 unbalanced stereo audio, on RCA type connectors.
SWITCHING SYSTEM: Mechanical, break-before-make.
CROSSPOINTS: 1 of 8.
SIGNAL LEVELS: Up to +30dBu.
BANDWIDTH(-3dB): 25kHz.
DIMENSIONS: 18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
OPTIONS: RK-81 19” rack adapter.
|
NPUT: 1 balanced audio stereo: +4dBu/100kΩ on detachable terminal blocks.
OUTPUTS: 3 balanced audio stereo: +4dBu/150Ω on detachable terminal blocks.
MAX. OUTPUT LEVEL: 20dBu.
BANDWIDTH (-3dB): >100kHz.
S/N RATIO: 87.6dB.
CONTROL: Output level control: -0.5dB to +8.6dB.
COUPLING: DC.
AUDIO THD + NOISE: 0.024%.
POWER SOURCE: 12V DC 40mA.
DIMENSIONS: 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply.
OPTIONS: RK-SM 19" rack adapter.
|
The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tapeplayer, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.
Technical Specifications
Audio Inputs
|
|
|
TRS1&2
|
Type
|
¼” TRS Passive-Balanced
|
|
Input Impedance
|
2K-5K Ohm (Speaker load and Trim level dependent)
|
|
S/N Ratio
|
Greater than 140dB
|
|
THD+N
|
Less than .0005% (1KHz @ 0dBu)
|
|
Frequency Response
|
Greater than 1MHz
|
AUX
|
|
|
|
Type
|
RCA Active-Unbalanced
|
|
Input Impedance
|
8Kohm
|
|
S/N Ratio
|
Greater than 115dB (1KHz @ 0dBu, Unity gain)
|
|
THD+N
|
Less than .002% (1KHz @ 0dBu, Unity gain)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to +20dB
|
S/PDIF
|
|
|
|
Types
|
RCA 75Ohm-coax and Toslink optical
|
|
Dynamic Range
|
117dB
|
|
THD+N
|
0.0025% (1KHz @ -1dBfs)
|
|
Maximum output
|
+18dBu (Active-Balanced)
|
|
Sample Rates
|
44.1K, 48K, 88.2K, 96K, 176.4K, 192K
|
Audio Outputs
|
|
|
Speakers
|
Type
|
¼” TRS Passive-Balanced
|
|
Type-Mono Activated
|
¼” TRS Active-Impedance Balanced
|
|
Trim Range
|
-90dB to 0dB
|
|
Main Level Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB
|
Main
|
|
|
|
Type
|
¼” TRS Active-Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than 0.0025%
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
Cue
|
|
|
|
Type
|
¼” TRS Active-Impedance Balanced
|
|
Output Impedance
|
51Ohm
|
|
THD+N
|
Less than .003% (1KHz @ 0dBu)
|
|
Frequency Response
|
10Hz-50KHz, -.5dB
|
|
Gain Range
|
-90dB to 0dB
|
|
Dim Attenuation
|
-30dB (Talkback activated)
|
Headphones
|
|
|
|
Type
|
¼” TRS Active Stereo
|
|
Maximum Output
|
150mW/channel @ 60 Ohm load
|
|
THD+N
|
0.015% (150mW/channel @ 60 Ohm load)
|
|
Frequency Response
|
10Hz-50KHz, +1dB
|
Physical
| |
Main Chassis
| | |
Package Type
|
1U - steel chassis
|
Dimensions
|
19(W) X 1.75(H) X 5.50(D) inches
|
Weight
|
5.0lbs
|
External Power Supply
| | |
Package Type
|
Molded Plastic
|
Dimensions
|
2.5(W) X 2.3(H) X 4.0(D) inches
|
Weight
|
2.5lbs
|
|
INPUT: 1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack; 3 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors.
OUTPUTS: Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in.
BANDWIDTH (-3dB): 20kHz.
S/N RATIO: 68dB unweighted.
CONTROL: Input selector switches: bass (70Hz.), mid (1kHz), treble (15kHz): +/-15dB; volume, balance, and loudness controls.
OUTPUT POWER: 4.5W RMS per channel into 4Ω @15V supply.
THD+NOISE: 0.059% @1kHz, 1V.
2nd HARMONIC: 0.025%.
POWER SOURCE: 12-15V DC, 22V max, up to 1A.
DIMENSIONS: 19cm x 13.5cm x 2.5cm (7.5” x 5.3” x 0.98”) W, D, H.
WEIGHT: 0.6kg (1.32lbs) approx.
ACCESSORIES: Power supply.
OPTIONS: RK-T2B 19" rack adapter.
|
Input Unbalanced Stereo Audio, 1 Vpp @ 20K ohms, on a 3.5mm stereo miniplug
Output Unbalanced Stereo Audio x2, 1 Vpp @ 150 ohms, on 3.5mm stereo miniplugs
Coupling AC
Audio Bandwidth 100 kHz
Signal to Noise Ratio 71.6 dB
Audio THD 0.017%
Audio Control Left and Right Gain Control
Dimensions 2.36 x 2.56 x 1“
6 x 6.5 x 2.5cm
WxDxH
Weight 0.22 lbs
0.1 kg
Power Source 12 VDC on a AC Power Adapter
|
INPUT: 1 unbalanced stereo/balanced mono, 1Vpp/33kΩ on a 3.5mm mini jack.
OUTPUTS: 5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5-mm mini jacks.
MAX. OUTPUT: 5Vpp.
AUDIO BANDWIDTH (-3dB): 20kHz.
S/N RATIO: 80dB unweighted.
CONTROL: Left and right gain rear trimmers (0 to +3.5dB).
COUPLING: AC.
THD: 0.03% (2nd harmonic).
POWER SOURCE: 12V DC, 100mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
Reviews
There are no reviews yet.