Content |
The TR-1 is a high-resolution video isolation transformer for composite video signals. It provides complete isolation between devices to eliminate video hum, ground loops, and DC offsets, which can degrade picture quality.
o Bandwidth - 5.8MHz (-3dB).
o Passive (no power required).
o Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3TR rack adapter.
*
INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
INSERTION LOSS: 0.8dB.
MAX. OUTPUT LEVEL: 4 Vpp/75Ω.
BANDWIDTH (-3dB): 5.8MHz.
DIFF. GAIN: 0.05%.
DIFF. PHASE: 0.05Deg.
K-FACTOR: 1.2%.
S/N RATIO: 73.4dB.
TILT: 0.1%.
NON-LINEARITY: 0.1%.
COUPLING: Transformer.
POWER SOURCE: Passive.
DIMENSIONS: 120mm x 73mm x 30mm (4.7” x 2.88” x 1.2”) W, D, H.
WEIGHT: 0.34kg (0.75lbs) approx.
ACCESSORIES: Mounting brackets.
OPTIONS: RK-3TR 19" rack adapter.
|
INPUT: 1 Y/C, Y=1Vpp/75Ω, C=0.3Vpp/75Ω on a 4-pin connector.
OUTPUT: 3 Y/C, Y=1Vpp/75Ωs, C=0.3Vpp/75Ω, on 4-pin connectors.
BANDWIDTH (-3dB): 420MHz (Y).
MAX. OUTPUT LEVEL: 2.6Vpp/75Ω (Y).
DIFF. GAIN: 0.05%.
DIFF. PHASE: 0.03Deg.
K-FACTOR: |
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL: 1.4Vpp.
VIDEO BANDWIDTH (-3dB): 160MHz (Y).
NON-LINEARITY: 0.05%.
DIFF. GAIN: 0.08%.
DIFF. PHASE: 0.08Deg.
K-FACTOR: 0.1%.
VIDEO S/N RATIO: Better than 80dB (Y channel).
POWER SOURCE: 12V DC, 60mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.28kg (0.62lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19” rack adapter.
|
INPUTS: 1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector
OUTPUT: 1 balanced, 150Ω on a 6/4 standard telephone socket.
BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors
NON-LINEARITY (PAIR): Less 0.2% at short distances
DIFF. GAIN (PAIR): 0.41%.
DIFF. PHASE (PAIR): 0.3 Deg.
K-FACTOR (@ 20m, PAIR): 0.1%.
S/N RATIO (PAIR): 72 dB.
CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.
POWER SOURCE: 12 VDC 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28 kg. (0.62 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters
|
COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.
* Bandwidth - 7MHz (- 3dB).
* Inputs - 1 composite video and 1 unbalanced stereo audio.
* Outputs - 1 single signal of the combined audio and composite video.
* Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.
INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.
|
Input SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs 8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution 10-bit or 8-bit, automatic according to input resolution.
Standards 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization Automatic for up to >30dB cable loss.
Power Source 100-240V AC, 50/60Hz, 14VA.
Dimensions 19" x 7" x 1U W, D, H, rack mountable.
Weight 2.5kg (5.5lbs) approx.
Accessories Power cord.
|
Reviews
There are no reviews yet.