Content | High power 15" woofer.
Very good power handling, excellent linearity and very low distortion.
Very efficient heat dissipation in ensured by a radiator that is part of the basket design.
The air is forced in the radiator thanks to a dual sealed spider design.
- 3-inch, fiberglass inside/outside copper voice coil
- 1000W continuous program power handling
- 98 dB Sensitivity
- 40 Hz – 2 kHz Frequency range
- Dual spider design with silicon based dampening control
- M-roll surround and exponential cone geometry
GENERAL SPECIFICATIONS
- Nominal Diameter:380 / 15mm/inch
- Rated Impedance:8Ω
- Program Power:1000W AES
- Power handling capacity:500W AES
- Sensitivity:98dB
- Frequency Range:40Hz ÷ 2000 Hz
- Effective Piston Diameter:330 / 13mm/inch
- Max Excursion Before Damage (peak to peak):36 / 1.4mm/inch
- Minimum Impedance:8Ω
- Voice Coil Diameter:76 / 3mm/inch
- Voice Coil Material:Copper
- Voice Coil Winding Depth:18 / 0.7mm/inch
- Number of layers:2
- Kind of layer:inside / outside
- Top Plate Thickness:10 / 0.4mm/inch
- Cone Material:No pressed pulp
- Cone Design:Curved
- Surround Material:Polycotton
- Surround Design:M - roll
THIELE/SMALL PARAMETERS
- Resonance frequency:50Hz
- DC resistance:6Ω
- Mechanical factor:7
- Electrical factor:41
- Total factor:39
- BL Factor:4T · m
- Effective Moving Mass:106g
- Equivalent Cas air load:100liters
- Effettive piston area:085m²
- linear excursion (mathematical):6.5mm
- Voice - coil inductance @ 1kHz:5mH
- Half-space efficiency:94%
MOUNTING INFORMATION
- Overall Diameter:387 / 15.2mm/inch
- Bolt Circle Diameter:371 / 14.6mm/inch
- Bolt Hole Diameter:5 / 0.3mm/inch
- Front Mount Baffle Cut-out:352 / 13.9mm/inch
- Rear Mount Baffle Cut-out:360 / 14.1mm/inch
- Depth:163 / 6.4mm/inch
- Volume occupied by the driver:8 / 0.13liters/ft³
- Net Weight:5 / 20.9kg/lbs
| LF B&C Speakers 15-PS76 Subwoofer Speaker 15 inch 1100W, 99dB
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
15PS76 |
Product code |
ALT15PS768 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
15.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
99 dB |
Calculated sensitivity |
96.92 dB |
Nominal power handling |
550 W |
Bandwidth |
40÷2000 Hz |
Fundamental parameters
|
Sd |
855 cm² |
Mms |
106 gr |
Le |
1.3 mH |
Re |
5 ohm |
BL |
22.1 T.m |
Small signal parameters
|
Fs |
38 Hz |
Qes |
0.28 |
Qms |
5.2 |
Qts |
0.26 |
Vas |
164 L |
Datas
|
Xmax |
±7.5 mm |
Calculated Xmax |
±7.6667 mm |
EBP |
136 Hz |
Zmin |
6.3 ohm |
Fs / Qts |
146 Hz |
Vas * Qts² |
11.09 L |
Efficiency |
3.3 % |
Calculated efficiency |
3.09 % |
Weight |
~8.7 kg |
Dimensions
|
Voice coil diameter |
3 inch |
Winding depth |
19 mm |
Gap height |
11 mm |
Outside diameter |
393 mm |
Baffle cutout diameter |
354 mm |
Front thickness |
16 mm |
Depth after front |
155 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Ferrite |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
Surround material |
Cloth |
EAN 8059300642818 |
15" Speaker 300 W 8 Ohms
Recommended for professional audio as a woofer in sealed and vented enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
1.5 "
Voice Coil
38.1 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Section Diameter
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
148 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
maximum rated load
400 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6.35 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
35 Hz
Re (DC resistance)
6.32 Ohm(s)
Qms (mechanical quality)
8.1
Le (inductance of the voice coil)
1.1 mH
Qes (electrical quality)
0.63
Qts (overall quality)
0.58
Vas (equivalent volume)
334.6
Mms (moving mass)
60 g
BL (power factor)
11.5 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.35 mm/N
Sd (membrane area)
823.7 cm²
Weight
4,9 kg
| |
Nominal diameter | 15in/381mm | Power Rating | 400W | Sensitivity | 98dB | Frequency Range | 42-3500Hz | Voice coil
diameter | 3in/76.2mm | Magnet type | Neodymium | Weight | 2.6kg/5.7lb |
|
The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“. |
Reviews
There are no reviews yet.