| Content |
- 3 Channels (Clean, Rhythm and Lead)
- Power: 300W
- 2 Power Modes: High Power - 300 W and Standard Power - 1-60 W
- Preamp tubes: 2 x ECC83
- Controls: Pre-Boost, Clean Volume, Rhythm Gain, Lead Gain, Bass Pull Shift, Middle Pull Shift, Treble Pull Shift, Volume, Master Tone, Master Reverb and Variwatts
- Switch: On / Off
- Effects: Reverb
- Serial FX loop
- Connections: Input (6.3 mm jack), Speaker Output (Twist Lock and 6.3 mm jack combo), FX Loop Send and Return (2 x 6.3 mm jack), Footswitch Input (5 pin DIN)
- Speaker outputs: 4 - 16 ohms (6.3 mm jack)
- Dimensions (W x D x H): 320 x 235 x 70 mm
- Weight: 3.5 kg
- Includes FS4 footswitch
|
- Extremely small all-tube guitar amplifier head
- NORMAL/TOP BOOST channel select
- THIN/MELLOW tone control
- GAIN and VOLUME controls
- 8Ω/16Ω speaker out select
- Full metal construction
Power:
| 5W | | Channels: | 1 | | Equalizer: | - | | Inputs: | 1 | | Outputs: | 2 | | Effects: | - | | Valves: | Yes | | Foot-switch: | - | | Controls: | Thin, Mellow, Gain, Volume | | FX Loop: | - | | Dimensions ( W x H x D ): | -
120mm (d) x 193mm (w) x 105mm (h)
| | Weight: | -
2,55kg
|
|
Marshall 1987X-01 50W Guitar Amplifier
Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
- Output: 50 Watts
- Pre-amp Tubes: 3 x ECC83
- Power Amp Tubes: 2 x EL34
- EQ: 3-Band
- Presence Control
|
The Marshall 2061X 20W Amp Head is a hand-wired reissue of the model 2061, a "Lead and Bass" head originally produced from 1967 to 1973. With 20W of power, it churned out golden crunchy tones with depth and character. The Marshall 2061X comes with 2 EL84 tubes in the power amp, 2 ECC83s in the preamp, and a solid state rectifier.
Marshall 2061X Handwired 20W Amp Head Features:
- Hand-wired reissue of the 2061 "Lead and Bass" head
- 20W
- 2 EL84 tubes in the power amp
- 2 ECC83s in the preamp
- Solid state rectifier
| The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the worldʼs guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar.
Outstanding Tone
The JVM Series uses a carefully designed, 4 x ECC83 pre-amp stage to generate the desired amount of gain, from the cleanest, yet complex, clean imaginable to a vast palette of overdrives that range from sophisticated and subtle to explosive and extreme. Boasting a truly amazing array of instantly switchable sounds, overflowing with harmonically rich tones and responsive fluidity, every JVM mode exudes that unmistakable Marshall sound and expands on it, effectively offering multiple Marshalls in one easy-to-use package.
Ultimate Flexibility
Each totally independent JVM channel offers three footswitchable modes which progressively add gain while offering a complimentary tonal topology, making the JVM the perfect amplifier for any situation.
Seamless, Silent Switching
Ultimate Control and Connectivity
Every JVM is supplied with a fully programmable footswitch. This revolutionary, patent-pending technology allows single front panel switching (SWITCH STORE) or entire set-ups (PRESET STORE – Channel/Mode, Reverb, FX Loop, Master Volume) to be simply assigned to any footswitch . . . or, even cooler, a mix ʽnʼ match of both modes. Housed in a rugged metal casing with blank panels on its surface which allow the user to label the pedal exactly as they want, the JVM pedal has no restrictive factory set-ups or functionality barriers, plus itʼs a breeze to program. The multi-coloured LEDs reflect every front panel switch status so you know exactly where you are, in the heat of a performance, without the need to glance at the amplifier itself.
The JVMʼs MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up, allowing you to store and recall 128 amplifier set-ups and enabling your MIDI effects board to easily control the amp. With its built-in memory and switching options the possibilities are endless!
Studio-Quality Reverb
Effective Control
Each JVM boasts two FX Loops that live on its rear panel. A footswitchable Parallel/Series Loop with Level and Mix controls plus a Series Loop with a Bypass switch. Combine the JVM with a MIDI FX processor and a MIDI footswitch and the skyʼs the limit!
The Tone of the Cone
In the case of the 2x12 in. JVM combos, after exhaustive testing of every speaker available, all agreed that the pairing of a Marshall/Celestion ʽHeritageʼ with a Marshall/Celestion ʽVintageʼ was the only way to go as the combination produces a fantastic depth and breadth of sound while maintaining a tight, musical response and a solid low-end thump. In the case of the 50 Watt 1x12”combo, a Celestion G12B delivers a full, wide sound that is much "bigger” than the JVM215Cʼs compact size would suggest.
Every JVM is made at the Marshall factory in the heart of England. Time-tested craftsmanship and construction are combined with the latest advances in manufacturing technology, ensuring world-class build quality and roadworthiness.
Internally, the JVM circuitry and layout has been kept as simple and logical as possible, ensuring the integrity of the guitar tone and an incredibly low noise-floor for such a high gain beast. Four, double-sided PCBs are used and connections are kept to a minimum to ensure maximum reliability. Only the best components are used to ensure very high quality and all of the internal wiring and amplifier assembly is performed by hand. Strict quality controls ensure every unit made is worthy of the world-renowned and respected white script Marshall logo. Meticulous valve selection adds further to the all-important tone and reliability that are both synonymous with the Marshall legend.
Technical Info
Output (RMS): 100 Watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 1 x ECC83, 4 x EL34
Footswitch (Supplied): PEDL-00045
Dimensions (Millimeters): 750 x 310 x 215
Weight: 22 kg, 48.5 lbs |
BUGERA captures the stunning sound of the 1960s with the V55, a combo whose modern touches put a wide palette of vintage tones at your fingertips. With a proud pair of 6L6 power tubes in the output stage, the V55 bathes your guitar in clean California sunshine.
Its 2-channel preamp takes you everywhere from warm blues to garage-shattering crunch. A heavy-duty footswitch (included) lets you switch between channels remotely. Choose triode mode for an urgent, aggressive tonal edge, or pentode mode for clean and loud sound. A dose of built-in reverb provides the finishing touch. V55's Impedance switch (4, 8 and 16 ohms) makes it compatible with virtually any speaker cabinet. A custom-designed, handmade 12" BUGERA speaker brings this amp's vintage voice home in style.
Also available in a head version, the V55HD is ideally suited for use with the 212V-BK speaker cabinet.
Rock on with the way-out sound of yesterday - the BUGERA V55.
Features- Hand-built 55-Watt guitar head driven by 2 x 6L6 tubes
- Way cool vintage look and feel
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 tubes-everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre Gain, Post Gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Heavy-duty footswitch for Channel and Reverb function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
Reviews
There are no reviews yet.