LANEY LX-12 Electric Guitar Amplifier

Vox AD50VT 50W Guitar Amplifier

Number of amp types: 11
Number of effects: 11, Noise reduction: 1
Number of programs: 11 preset, 2 channel.
Input/output jacks: Top panel ??? 1 x INPUT. Rear panel ??? 1 x FOOT SW , 1 x LINE/ PHONE,
(AD100VT, AD50VT & AD50VT121 only) 1 x EXTERNAL SPEAKER OUT, (AD100VT only) 1 x LOOP RETURN Jack
1 x LOOP SEND Jack.
Power amp output:AD100VT = maximum 100 RMS @ 8 ohms, AD50VT(212) = maximum 50W RMS @ 8 ohms
AD30VT = maximum 30W RMS @ 8 ohms, AD15VT = maximum 15W RMS @ 8 ohms.
Adjustable Output Wattage (AD100VT, 50VT, 50VT-212, 30VT).
Speaker: AD100VT = 2 x 12 inch VOX oringinal 16 ohm, AD50VT-212 = 2 x 12 inch VOX oringinal 16 ohm
AD50VT = 1x Celestion 70/80 (12 inch 8 ohm), AD30VT = 1x VOX original (10 inch 8 ohm), AD15VT = 1x VOX original
(8 inch 8 ohm),
Signal processing A/D conversion: 24-bit, D/A conversion: 24-bit, Sampling frequency: 44.1 kHz .
Power supply requirements: AC, local voltage.
Power consumption: AD100VT=100W, AD50VT(212)=52W, AD30VT=45W, AD15VT=23W
Dimensions: AD100VT = 55.3cms (21.77“) (H) x 68.4cms (26.93“) (W) x 26.8cms (10.55“) (D),
AD50VT-212 = 48.5cms (19.09“) (H) x 67.3cms (26.50“) (W) x 26.5cms (10.43“) (D),
AD50VT = 50.67cms (19.95“) (H) x 57.81cms (22.76“) (W) x 26.5cms (10.43“) (D),
AD30VT = 43cms (16.93“) (H) x 45.59cms (17.95“) (W) x 22.40 cms (8.82“) (D),
AD15VT = 39.5cms (15.55“) (H) x 42.8cms (16.85“) (W) x 22.4cms (8.82“) (D)
Weight: AD100VT = 29kg (63.93lbs), AD50VT-212 = 23kg (50.71lbs), AD50VT = 20kgs (44.09lbs)
AD30VT = 12kgs (26.46lbs), AD15VT = 10kgs (22.05lbs) .
Included items: power cable .
Options (sold separately): VFS2 dual foot switch.

Product Description

The Marshall MG102CFX provides pure analog Marshall tone. Marshall MG102CFX is a Carbon Fiber outfitted 100 watt 2x12 Combo with FX! With a totally new internal design and approach, the brand new MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart.

Innovation, Functionality, Tone - just a few words that help sum up the brand new range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.

Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the new MG range. From a punchy 10 watt combo through to an effects laden, soul pounding 100 watt head, this series has it all.

Features

- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 2x12 in. Speakers
- 100 watts

• 30-watt, 2x12" combo guitar amplifier
  
• Two channels with independent volume controls — Normal and Top Boost
  
• Reverb and Tremolo effects onboard (controllable via optional footswitch)
  
• Master volume section with Tone Cut and Volume controls
  
• True bypass effects loop for bringing in your own pedals
  
• Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
  
• 16-ohm output jack for running a cabinet along with the internal speakers
  
• Features two 12" 8-ohm Celestion Alnico Blue speakers
  
• Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
  
• Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
  
• Weight: 73.59 lbs.

• Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
  
• 2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
  
• Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
  
• Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
  
• Revolutionary INFINIUM Tube Life Multiplier technology:
  
  • Extends the life of your amplifierʼs expensive power valves up to 20 times.
    
  • Provides incredible reliability and consistent tone over the complete lifespan of your valves
    
  • No need for expensive matched valve sets
    
  • Allows you to mix and match any combination of compatible valve types and brands
    
  • Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement

• Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
  
• Power amp damping switchable (High, Medium, Low) for total sound control
  
• Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
  
• Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
  
• Line output with dedicated Level control
  
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  
• High-quality components and exceptionally rugged constructionensure long life