LEXICON PCM 81 2-in/2-out Studio/Live Sound Multi-Effects Processor USED

No longer available!

500.00

Out of stock

CompareAdd to wishlist Submit Better Price
PRICE DOES NOT INCLUDE VAT The PCM 81 Stunning Effects The PCM 81 takes where the PCM 80 left off, and adds AES/EBU Digital I/O, includes algorithms and presets from the Pitch FX and Vocal Fix Cards, and adds 24-bit converters for even higher quality audio. The PCM 81 maintains Lexicon’s highest standards for sonic […]

 

Read more

PRICE DOES NOT INCLUDE VAT

The PCM 81 Stunning Effects

The PCM 81 takes where the PCM 80 left off, and adds AES/EBU Digital I/O, includes algorithms and presets from the Pitch FX and Vocal Fix Cards, and adds 24-bit converters for even higher quality audio.

The PCM 81 maintains Lexicon’s highest standards for sonic clarity, and its extraordinary processing power yields the finest effects available in its price class, plus outstanding reverberation.

Details

Analog Audio Input    XLR and 1/4″ balanced (T/R/S)
Input Level    -2dBu to +20dBu, balanced;
-22dBu to 0dBu, unbalanced
Input Impedance    100kΩ, balanced;50kΩ, unbalanced
Analog Audio Output    XLR and 1/4“T/R/S balanced
Output Level    +18dBm, balanced;+4dBm, unbalanced
Output Impedance    125Ω, balanced
Digital Audio Input    XLR, AES/EBU;
Coaxial RCA, S/PDIF
Format    AES/EBU, balanced;
S/PDIF, unbalanced
Sample Rate    44.1kHz and 48kHz
Digital Audio Output    XLR, AES/EBU;
Coaxial RCA, S/PDIF
Format    AES/EBU, balanced;
S/PDIF, unbalanced
Sample Rate    44.1kHz and 48kHz
Conversion    24-bit A/D;24-bit D/A
Internal Audio DSP    24-bit (PCM 81);20-bit (PCM 91)
Frequency Response    10Hz – 20kHz ±.5dB
Crosstalk    -55dB 10Hz to 20kHz
THD    98dB typical, 10Hz – 20kHz
A/D:>105dB typical, 10Hz- 20kHz
A/A:>96dB typical, 10Hz – 20kHz
MIDI Interface    5-pin DIN connectors for MIDI IN, THRU and OUT
Footswitch    1/4“T/R/S connector for two independent momentary footswitches (system detects normal-open, or normal-closed on power up)
Foot Controller    1/4“T/R/S connector for foot pedal(100Ω- 10kΩimpedance)
Memory Card
Connector    PCMCIA type l cards, 68 pins
Standards    PCMCIA 2.0 and JEIDA 4.0
Card Format    Up to 1MB of SRAM (attribute memory not required)
Power Requirements    100 – 240 volts AC;50 – 60Hz;35 watts
Automatic switching (3-pin IEC connector)
Remote Power In    2.5 mm 9 volts AC (not included)
Dimensions    19″ W x 1.75″ H (1U) x 12″ D
(483 x 45 x 305 mm), rack mount standard
Weight    6.4 lbs.(2.9 kg)
Operating Temperature    32°to 104°F (0°to 40°C)
Maximum Humidity    95% without condensation

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “LEXICON PCM 81 2-in/2-out Studio/Live Sound Multi-Effects Processor USED”

Your email address will not be published. Required fields are marked *

Quick Comparison

LEXICON PCM 81 2-in/2-out Studio/Live Sound Multi-Effects Processor USED removeDBX Quantum 2 Digital Multi Band Processor DEMO removePeavey EQ-215 Stereo Equalizer Vintage -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) removeYAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan) removeGepco Passive D.I. Box USED remove
NameLEXICON PCM 81 2-in/2-out Studio/Live Sound Multi-Effects Processor USED removeDBX Quantum 2 Digital Multi Band Processor DEMO removePeavey EQ-215 Stereo Equalizer Vintage -SECOND HAND- removeSAMSON S-COM 4 Four Channel Compressor-Gate Processor (USED) removeYAMAHA SPX-990 Professional Multi Effect Processor with 20-bit Sound USED (Made in Japan) removeGepco Passive D.I. Box USED remove
Image
SKUPCM81DBX QUANTUM IIEQ215SHSCOM 4 USEDSPX990GEPCO
Rating
Price 500.00 979.60 incl. GR VAT140.00 80.00299.0019.00
Stock

Out of stock

Only 1 left in stock

Only 1 left in stock

Available on backorder

Only 1 left in stock

Only 1 left in stock

AvailabilityOut of stockOnly 1 left in stockOnly 1 left in stockAvailable on backorderOnly 1 left in stockOnly 1 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPRICE DOES NOT INCLUDE VAT The PCM 81 Stunning Effects The PCM 81 takes where the PCM 80 left off, and adds AES/EBU Digital I/O, includes algorithms and presets from the Pitch FX and Vocal Fix Cards, and adds 24-bit converters for even higher quality audio. The PCM 81 maintains Lexicon's highest standards for sonic clarity, and its extraordinary processing power yields the finest effects available in its price class, plus outstanding reverberation. Details Analog Audio Input    XLR and 1/4" balanced (T/R/S) Input Level    -2dBu to +20dBu, balanced; -22dBu to 0dBu, unbalanced Input Impedance    100kΩ, balanced;50kΩ, unbalanced Analog Audio Output    XLR and 1/4“T/R/S balanced Output Level    +18dBm, balanced;+4dBm, unbalanced Output Impedance    125Ω, balanced Digital Audio Input    XLR, AES/EBU; Coaxial RCA, S/PDIF Format    AES/EBU, balanced; S/PDIF, unbalanced Sample Rate    44.1kHz and 48kHz Digital Audio Output    XLR, AES/EBU; Coaxial RCA, S/PDIF Format    AES/EBU, balanced; S/PDIF, unbalanced Sample Rate    44.1kHz and 48kHz Conversion    24-bit A/D;24-bit D/A Internal Audio DSP    24-bit (PCM 81);20-bit (PCM 91) Frequency Response    10Hz - 20kHz ±.5dB Crosstalk    -55dB 10Hz to 20kHz THD    98dB typical, 10Hz - 20kHz A/D:>105dB typical, 10Hz- 20kHz A/A:>96dB typical, 10Hz - 20kHz MIDI Interface    5-pin DIN connectors for MIDI IN, THRU and OUT Footswitch    1/4“T/R/S connector for two independent momentary footswitches (system detects normal-open, or normal-closed on power up) Foot Controller    1/4“T/R/S connector for foot pedal(100Ω- 10kΩimpedance) Memory Card Connector    PCMCIA type l cards, 68 pins Standards    PCMCIA 2.0 and JEIDA 4.0 Card Format    Up to 1MB of SRAM (attribute memory not required) Power Requirements    100 - 240 volts AC;50 - 60Hz;35 watts Automatic switching (3-pin IEC connector) Remote Power In    2.5 mm 9 volts AC (not included) Dimensions    19" W x 1.75" H (1U) x 12" D (483 x 45 x 305 mm), rack mount standard Weight    6.4 lbs.(2.9 kg) Operating Temperature    32°to 104°F (0°to 40°C) Maximum Humidity    95% without condensation

DEMO PIECE IN VERY GOOD CONDITION

COMES IN ORIGINAL PACKAGE WILL ALL CABLES/MANUALS STILL SEALED!

 

DBX Quantum 2 Digital Multi Band Processor

The Quantum II is your studio\'s secret to success, delivering a fully professional master every time. You get sample rates up to 96kHz , a true, 48-bit digital signal path, and legendary dbx dynamics processing in a 4-band multiband system. The 4-way crossover splits the signal into 4-bands, and each band may be individually gated, compressed, and limited. The intuitive user interface puts all the mastering processes you need right at your fingertips.

A quick surf through the menu driven system gives you a glimpse of the packed feature set. But what really makes the Quantum II a giant in the field of dynamics processing is the dbx Type IV Conversion System. This lets you capture the character of any analog signal to the digital domain, retaining the original warmth of the sound yet allowing you the precision and accuracy you need in today\'s digital world.

Features:
  • 96 kHz, 24 bit A/D, D/A, and Digital I/O on AES/EBU or S/PDIF
  • 48 bit internal signal path for increased head room and low level resolution
  • Patented TYPE IV™ A/D Conversion system with TSE™
  • 4 band stereo compressor-gate-limiter
  • 5 band EQ - Hi and Lo shelves, 3 band fully parametric and MS EQ
  • Normalizer - lets you control overall signal dynamics
  • Stereo adjust - control your stereo image
  • Sync input/output using dbx\'s ownproprietary clock chips for extremely low jitter sync
  • Dither outputs to 16, 20, or 24 bits
  • Sample rate conversion - Fill Up/Down
  • Software updateable via Internet and MIDI and RS 232
  • 4 band crossover with variable slopes
  • GUI Control

PRICE WITHOUT VAT 24%

PRICE DOES NOT INCLUDE VAT

Peavey EQ-215 Stereo Vintage (Used)

  • 15 frequency bands stereo equalizer
  • External condition: mediocre (scratches,one fader knob missing)
  • Works perfectly
  • Made in U.S.A.
  • Price does not include V.A.T.

 

USED IN GOOD CONDITION.

Price does not include vat

The S com 4 is a compact and versatile single-rack space device that provides
four channels of high quality dynamics processing with an Expander/Gate and
Compressor/Limiter on each channel.
The four channels operate independently or in stereo pairs. Its multi-segment LED
metering displays input/output level as well as gain reduction. The Expander/Gate
section features a continuously variable Threshold control as well as a switch for
fast or slow release times.
The Compressor/Limiter section includes variable Threshold, Ratio and Output levels.
S com 4\'s Enhancer switch restores high frequencies that are sometimes diminished
by heavy compression. This wide-ranging combination of features makes the S com
4 an efficient and versatile audio tool for a wide variety of applications. Its clean and
quiet audio characteristics make it ideal where high sonic integrity is imperative. 
 
FEATURES:

4 Channel Compressor/Limiter, Expander/Gate with Enhancer
Linkable in two Stereo pairs
Expander/Gate with variable Trigger control and switchable Fast/Slow Release
5 Segment LED meters for Input/Output levels and Gain Reduction on each channel
Advanced circuit design utilizing Low Noise Operational
Amplifiers and High Quality VCA\'s
Servo Balanced Inputs and Outputs on XLR and 1/4" connectors
SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty 

PRICE DOES NOT INCLUDE VAT Features Advanced Hardware for Superior Sound The latest 20-bit analog-to-digital and digital-to-analog conversion technology-sampling at 44.1kHz. Frequency response extends all the way from 20 Hz to 20 kHz; dynamic range is an extraordinary 106dB; noise and distortion are neglible. Stereo Configuration with Balanced Inputs and Outputs A true 2-in/2-out stereo configuration that allows stereo sources to be processed without disrupting the original stereo image. Stereo inputs and outputs are all electronically balanced, with XLR and TRS phone jack connectors. Preset, Internal, and Card Memory 180 memory locations "on board“. 80 of these are read-only memory. The remaining 100 are writable memory locations. Plug-in memory cards hold an extra 100 effect programs each. Three-stage Effect Configuration In addition to the main effects, the SPX990 provides programmable pre and post effects that can be used to refine and polish your sound. In-depth Programming Power The SPX990 has 4 programmable pre effects, 36 programmable main effects, and 3 programmable post effects. Tempo-based Delay Time Programming Delay time parameters can be programmed in terms of tempo or note length. Delay time can also be entered via a footswitch or MIDI clock data. Superior Pitch Precision The SPX990 achieves faultless pitch tracking through a new dynamic waveform analysis technique. In addition to the simple parallel pitch tracking the SPX990's "intelligent" pitch change creates appropriate harmony based on a specified key and scale type. External Parameter Control The SPX990 allows two selected parameters from each program to be assigned to two external MIDI controllers. MIDI Control The SPX990 allows MIDI selection of all programs, and real-time control of up to two selected effect parameters at the same time. 4 Pre-Effects 1. 3-band PEQ *1, 2. Compressor *1, 3. Harmonic Driver *1, 4. Compressor, Dist. and EQ *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT 36 Main Effects: Reverb, Early Reflections, Delay and Echo, Modulation REVERB: Reverb *2, Filtered Reverb *2, Stereo Reverb *1, Echo Room *2; EARLY REFLECTIONS: Thin Early Reflection *2, Fat Early Reflection *2, Gate Reverb *2, Reverse Gate *2; DELAY and ECHO: Delay L, C, R *2, Echo *2, Multi Tap Delay *2, Stereo Echo *1, Tempo Mono Echo *2, Tempo Stereo Echo *1, Tempo Quad Echo *1; MODULATION: Flanger *1, Dual Flanger *1, FM Chorus *1, AM Chorus *1, Phaser *1, Symphonic *1 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN, 1 OUT Main Effects continued: Pitch Change, Pan, Complex Effects, Freeze PITCH CHANGE: Mono Pitch Change *3, Dual Pitch Chance *2, Triple Pitch Chance *2, Stereo Pitch Change *1; PAN: Auto Pan *2, Triggered Pan *2; COMPLEX EFFECTS: Chorus and Reverb *2, Symphonic and Reverb *2, Flanger and Reverb *2, Reverb (L) / Reverb (R) *1, ER (L)/ Reverb (R) *1, Echo (L) / Reverb (R) *1, Chorus (L) / Reverb (R) *1, Pan (L) / Pan (R) *1; FREEZE: Freeze *3 *1= 2 IN - 2 OUT, *2 = 1 IN - 2 OUT, *3 = 1 IN - 1 OUT 3 Post Effects 1. 3-band PEQ *1; 2. Compressor *1, Harmonic Driver *1 *1 = 2 IN - 2 OUT Specifications
Frequency Response 20 Hz - 20kHz +/-0.5 dB
CD Player
Dynamic Range Above 100 dB (typical 106dB)
Specifications
Hum and Noise Below -82 dBm (Typical -88dBm)
Distortion Below 0.005% at max. level 1 kHz
Input/ Number of Channel 2 (Phone Jack)
Input/ Nominal Level +4/-20dBm (Switchable)
Input/ Highest Input +24dBm (Switchable at +4dB)
Input/ Impedance 20 k ohm
Output/ Number of Channel 2 (Phone Jack)
Output/ Nominal Level +4/-20dBm (Switchable)
Output/ Highest Output +18dBm (Switchable at +4dB)
Output/ Impedance 150 ohm
A/D Conversion 20 bits
D/A Conversion 20 bits
Sampling Freq. 44.1kHz
Preset Program 1 - 80
User Memory Program 1 - 99,00
Optional Memory Card 1 - 99,00
Front Panel/ Control Input Level (L,R), Data Entry
Front Panel/ Keys Function Key x 6, Page Select Key x 2, Memory, Store, Edit, Bypass
Front Panel/ Display 2 ch. 8 segment LED (Level Meter) 6 segment LED (Mode Indicator) 7 segment LED (Memory No.) Memory, Edit, Bypass indicators 24 chara x 2 Line LCD
Front Panel/ Slot Memory Card
Rear Panel/ Connectors Input L/R (XLR x 2, Phone jack x 2 Output L/R (XLR x 2, Phone jack x 2) MIDI In, Thru/Out (DIN 5P x 2) Trigger (Phone Jack x 1) Bypass or INC/DEC (Phone Jack x 1)
Rear Panel/ Switch In/Out Level Switch (+4dB/ -20dB x 2) MIDI Thru/ Out Switch
Power Requirements US and Canadian Models: 120V, 60Hz British Model:240V, 50Hz General Model:230V, 50Hz
Power Consumption 25W
Dimensions 480 x 46 x 324.4 mm
(W x H x D) (18-7/8" x 1-13/16" x 12-3/4“) (including attachments)
Weight 4.6 kg (10lbs. 2oz)

PRICE DOES NOT INCLUDE VAT

Gepco Passive D.I. Box-2nd Hand-

Weight2.50 kg2.00 kg2.00 kg3.40 kg2.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 2.00 kg
Weight 2.00 kg
Weight 3.40 kg
Weight 2.50 kg
Weight 0.50 kg