Content | PRICE DOES NOT INCLUDE VAT
The PCM 81 Stunning Effects
The PCM 81 takes where the PCM 80 left off, and adds AES/EBU Digital I/O, includes algorithms and presets from the Pitch FX and Vocal Fix Cards, and adds 24-bit converters for even higher quality audio.
The PCM 81 maintains Lexicon's highest standards for sonic clarity, and its extraordinary processing power yields the finest effects available in its price class, plus outstanding reverberation.
Details
Analog Audio Input XLR and 1/4" balanced (T/R/S)
Input Level -2dBu to +20dBu, balanced;
-22dBu to 0dBu, unbalanced
Input Impedance 100kΩ, balanced;50kΩ, unbalanced
Analog Audio Output XLR and 1/4“T/R/S balanced
Output Level +18dBm, balanced;+4dBm, unbalanced
Output Impedance 125Ω, balanced
Digital Audio Input XLR, AES/EBU;
Coaxial RCA, S/PDIF
Format AES/EBU, balanced;
S/PDIF, unbalanced
Sample Rate 44.1kHz and 48kHz
Digital Audio Output XLR, AES/EBU;
Coaxial RCA, S/PDIF
Format AES/EBU, balanced;
S/PDIF, unbalanced
Sample Rate 44.1kHz and 48kHz
Conversion 24-bit A/D;24-bit D/A
Internal Audio DSP 24-bit (PCM 81);20-bit (PCM 91)
Frequency Response 10Hz - 20kHz ±.5dB
Crosstalk -55dB 10Hz to 20kHz
THD 98dB typical, 10Hz - 20kHz
A/D:>105dB typical, 10Hz- 20kHz
A/A:>96dB typical, 10Hz - 20kHz
MIDI Interface 5-pin DIN connectors for MIDI IN, THRU and OUT
Footswitch 1/4“T/R/S connector for two independent momentary footswitches (system detects normal-open, or normal-closed on power up)
Foot Controller 1/4“T/R/S connector for foot pedal(100Ω- 10kΩimpedance)
Memory Card
Connector PCMCIA type l cards, 68 pins
Standards PCMCIA 2.0 and JEIDA 4.0
Card Format Up to 1MB of SRAM (attribute memory not required)
Power Requirements 100 - 240 volts AC;50 - 60Hz;35 watts
Automatic switching (3-pin IEC connector)
Remote Power In 2.5 mm 9 volts AC (not included)
Dimensions 19" W x 1.75" H (1U) x 12" D
(483 x 45 x 305 mm), rack mount standard
Weight 6.4 lbs.(2.9 kg)
Operating Temperature 32°to 104°F (0°to 40°C)
Maximum Humidity 95% without condensation |
USED IN GOOD CONDITION.
Price does not include vat
The S com 4 is a compact and versatile single-rack space device that provides four channels of high quality dynamics processing with an Expander/Gate and Compressor/Limiter on each channel. The four channels operate independently or in stereo pairs. Its multi-segment LED metering displays input/output level as well as gain reduction. The Expander/Gate section features a continuously variable Threshold control as well as a switch for fast or slow release times. The Compressor/Limiter section includes variable Threshold, Ratio and Output levels. S com 4\'s Enhancer switch restores high frequencies that are sometimes diminished by heavy compression. This wide-ranging combination of features makes the S com 4 an efficient and versatile audio tool for a wide variety of applications. Its clean and quiet audio characteristics make it ideal where high sonic integrity is imperative. FEATURES:
4 Channel Compressor/Limiter, Expander/Gate with Enhancer Linkable in two Stereo pairs Expander/Gate with variable Trigger control and switchable Fast/Slow Release 5 Segment LED meters for Input/Output levels and Gain Reduction on each channel Advanced circuit design utilizing Low Noise Operational Amplifiers and High Quality VCA\'s Servo Balanced Inputs and Outputs on XLR and 1/4" connectors SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee based on the level of Input signal applied Individual Threshold and Ratio controls on each channel Three-year extended warranty |
PRICE DOES NOT INCLUDE VAT
Gepco Passive D.I. Box-2nd Hand-
|
DEMO PIECE IN VERY GOOD CONDITION
COMES IN ORIGINAL PACKAGE WILL ALL CABLES/MANUALS STILL SEALED!
DBX Quantum 2 Digital Multi Band Processor
The Quantum II is your studio\'s secret to success, delivering a fully professional master every time. You get sample rates up to 96kHz , a true, 48-bit digital signal path, and legendary dbx dynamics processing in a 4-band multiband system. The 4-way crossover splits the signal into 4-bands, and each band may be individually gated, compressed, and limited. The intuitive user interface puts all the mastering processes you need right at your fingertips.
A quick surf through the menu driven system gives you a glimpse of the packed feature set. But what really makes the Quantum II a giant in the field of dynamics processing is the dbx Type IV Conversion System. This lets you capture the character of any analog signal to the digital domain, retaining the original warmth of the sound yet allowing you the precision and accuracy you need in today\'s digital world.
Features:
- 96 kHz, 24 bit A/D, D/A, and Digital I/O on AES/EBU or S/PDIF
- 48 bit internal signal path for increased head room and low level resolution
- Patented TYPE IV™ A/D Conversion system with TSE™
- 4 band stereo compressor-gate-limiter
- 5 band EQ - Hi and Lo shelves, 3 band fully parametric and MS EQ
- Normalizer - lets you control overall signal dynamics
- Stereo adjust - control your stereo image
- Sync input/output using dbx\'s ownproprietary clock chips for extremely low jitter sync
- Dither outputs to 16, 20, or 24 bits
- Sample rate conversion - Fill Up/Down
- Software updateable via Internet and MIDI and RS 232
- 4 band crossover with variable slopes
- GUI Control
PRICE WITHOUT VAT 24% | PRICE WITHOUT V.A.T.
BSS Opal FCS-966 Constant Q Graphic Eq
Graphic equalisers are found in just about every sound application, from room contouring to feedback control and general audio sweetening.
Traditionally, much general eq'ing takes place on the faders alone, but this restricts the use of the faders at each end of the scale for further precision eq work. So we provided the Opal FCS-966 with separate LF and HF contour filters which can change an overall sound balance without disturbing a detailed room or loudspeaker response.
These filters are very musical gentle boost and cut shelving filters which can be used to add (or remove) room effects that change with temperature, audience numbers or humidity.
All these effects can be easily made without disturbing the critical fader settings already made.
Constant Q Filters
The modern generation of graphic eq's
uses the Constant Q topology, pioneered by BSS Audio, which means that the filter width is constant whatever the fader gain setting.
Compared to the earlier 'gyrator' style of filters, Constant Q filters provide a smoother and more predictable interaction between adjacent faders and the resulting eq curve more closely resembles the actual fader positions.
More Gain Control Per Filter
Each eq fader has +/-15dB of adjustable gain, more than many competitive graphic eq's. The faders are long-throw 45mm types for precision control.
High Pass Filter
Also provided on the FCS-966 is a sweepable high-pass filter which can be used very effectively to restrict the low-energy output for better amplifier and loudspeaker performance. Stage monitors also benefit from the application of a high-pass filter to remove bass signals e.g. from vocal-only wedges.
Metering
BSS Audio believes in providing engineers with information, and the FCS-966's 8-segment led meter shows output level and warns of signal clipping within the eq. When the unit is switched to bypass, the meter will read the input level, allowing accurate matching of the 'dry' and equalised signals using the gain control.
Centre Bypass
When any eq fader is in its centre detent position, the filter is automatically bypassed, for optimum performance.
Input/Outputs
All the inputs and outputs of the FCS-966 are electronically balanced, with optional transformer balancing. To make installation of the FCS-966 easier, we've provided three differerent interface connectors: XLR-type, 1/4" TRS jack and Phoenix/Combicon screw terminals.
Relay Bypass
The EQ IN buttons switch the EQ path
into circuit. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors.
Control Descriptions
Faders
30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders.
HP Filter
Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz.
LF Contour
Smooth shelving filter, +/-6dB of gain at 50Hz
HF Contour
Smooth shelving filter, +/-6dB of gain at 14kHz.
GAIN
Used for overall unity gain adjustment. Adjustable from - infinity to +10dB.
CLIP
Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points.
LED Meter
Shows output signal level (input signal when eq is bypassed) from -24dBu to +18dBu in 8 steps. |
PRICE DOES NOT INCLUDE VAT
Peavey EQ-215 Stereo Vintage (Used)
- 15 frequency bands stereo equalizer
- External condition: mediocre (scratches,one fader knob missing)
- Works perfectly
- Made in U.S.A.
- Price does not include V.A.T.
|
Reviews
There are no reviews yet.