MA Lighting 2port Node onPC SECOND HAND

700.00

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX. If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and […]

 

Read more

The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX.

If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications.
Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached.

Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display.

All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely.
The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes).

Dimensions 160 x 145 x 50 mm
Dimensions (inch) 6.3 x 5.7 x 1.9 inch
Net weight 1,1kg
Net weight (lbs) 2.3 lbs

PRICE WITHOUT  V.A.T. 24%

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “MA Lighting 2port Node onPC SECOND HAND”

Your email address will not be published. Required fields are marked *

Quick Comparison

MA Lighting 2port Node onPC SECOND HAND removeEurolite QuickDMX Wireless Receiver Compact 2.4 GHz removeCameo SB8.3 - 8-channel DMX splitter / booster (3-pin) removeEurolite USB-DMX512 PRO Interface MK2 removeSHOWTEC 30615 Stage Blinder 8 Polish Bulb 120V 250W DWE (8x) Used removeEUROLITE DMX 6 Splitter remove
NameMA Lighting 2port Node onPC SECOND HAND removeEurolite QuickDMX Wireless Receiver Compact 2.4 GHz removeCameo SB8.3 - 8-channel DMX splitter / booster (3-pin) removeEurolite USB-DMX512 PRO Interface MK2 removeSHOWTEC 30615 Stage Blinder 8 Polish Bulb 120V 250W DWE (8x) Used removeEUROLITE DMX 6 Splitter remove
ImageEurolite QuickDMX Wireless Receiver30615 showtec dwe 250w 120v 2000w
SKU2port NodeEUQDMXCLSB83USB-DMX512 PROMK230615DMX 6 SPLITTER
Rating
Price 700.00 85.56 incl. GR VAT 198.40 incl. GR VAT152.00 incl. GR VAT250.00 217.62 incl. GR VAT
Stock

Only 1 left in stock

In stock (can be backordered)

Only 2 left in stock (can be backordered)

Available on backorder

Out of stock

Available on backorder

AvailabilityOnly 1 left in stockIn stock (can be backordered)Only 2 left in stock (can be backordered)Available on backorderOut of stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
ContentThe MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX. If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications. Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached. Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display. All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely. The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes). Dimensions 160 x 145 x 50 mm Dimensions (inch) 6.3 x 5.7 x 1.9 inch Net weight 1,1kg Net weight (lbs) 2.3 lbs PRICE WITHOUT  V.A.T. 24%Compact DMX Wireless System 2.4 GHz The Eurolite QuickDMX transmitter and receiver is used for wireless transmission of DMX512 signals. The complete technology is integrated in an extended 3-pole XLR connector (female) with a rotatable antenna. The device is constructed as a transceiver, so it can be used as any transmitter and receiver. The use of this device eliminates the necessity of time-consuming cabling between the DMX lighting control unit and the DMX-controlled devices. Due to the GFSK technology (Gaussian Frequency Shift Keying), interference-free operation is also possible besides other wireless Bluetooth and WiFi devices. The range is up to 400 meters with visual contact. Setup is very easy via Plug & Play with a button for connecting and disconnecting QuickDMX receivers.
  • DMX radio receiver in miniature format for wireless transmission of up to 512 DMX channels
  • User friendly 3-pin XLR connector (female) with swivel antenna
  • Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
  • Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
  • Operating range of up to 400 m
  • From one up to 512 QuickDMX receivers can be operated per transmitter
  • Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
  • LED function display
  • Powered via included power supply
 

Technical specifications:

  • 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
  • Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
  • Wireless transmission in the 2.4 GHz band (ISM)
  • 78 Channels
  • Modulation: GFSK
  • Operating range: 400 m (with line-of-sight)
  • DMX connector: 3-Pin XLR (female)
  • DMX channels: 1 Universe (512 channels)
  • Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
  • Weight: 80 g
The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis. The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
  • Type: DMX 512 protocol
  • DMX Inputs: 2 (parallel)
  • DMX Input Connectors: 3-pin XLR male
  • DMX Thru Outputs: 2 (parallel)
  • DMX Thru Output Connectors: 3-pin XLR female
  • DMX Outputs: 8 (electrically isolated)
  • DMX Output Connectors: 3-pin XLR female
  • Controls: Power On/Off, DMX Thru Terminator
  • Indicators: 8 x Power LED, 8 x Signal LED
  • Power Socket: IEC power socket
  • Power Supply: transformer
  • Operating Voltage: 230 V AC, 50 Hz
  • Power Consumption (max.): 15 W
  • Dimensions (W x H x D): 483 x 44 x 160 mm
  • Accessories included in package: power cord
  • Suitable for a variety of DMX software applications
  • Fully supported by FreeStyler, DMXControl and PC_DIMMER
  • Output of up to 512 DMX channels
  • Stable DMX output thanks to integrated processor
  • Compatible with Windows 7, 8 and 10, Mac OS X and Linux
  • Connections: 3-Pin XLR connector (Neutrik), USB 2.0/ 1.1 B
  • DMX output galvanically isolated against voltage damage
  • Sturdy metal housing
  • Power supply via USB
  • Power supply: 5 V DC via USB
  • Dimensions (L x W x H): 80 x 42 x 50 mm
  • Weight: 350 g
  • Incl. USB cable A/ B
  • Made in Germany
Stage Blinder 8 Polish Bulb 120V 250W DWE (8x) Used in Good Condition Vat not includingEurolite DMX Split 6X - 6-way DMX splitter for rackmounting, DMX distributor with one input and six outputs,  absolute electric isolation between input and output or between output and output, two types of DMX connectors (3-pin & 5-pin) for each individual channel, every DMX output features an independent driver and data indicator, input and output with a set of respective power supply and 500 mA internal fuse. Power supply: 230V AC~50Hz. Power consumption: 35W. DMX 512-output: 3-pin or 5-pin XLR-connector. Dimensions: 483 x 200 x 50mm (LxWxH). Weight: 3.5kg
Weight2.00 kg0.11 kg3.00 kg0.50 kg9.00 kg3.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 0.11 kg
Weight 3.00 kg
Weight 0.50 kg
Weight 9.00 kg
Weight 3.50 kg