| Content | Micro Spider™ is a fully loaded, battery-powered addition to the Spider™ family of amplifiers. At home, on vacation or in the back of the tour bus, Micro Spider is the portable amp you can truly rely on for brilliant on-the-go tones and effects for electric guitars, acoustic guitars and vocals.Offering attitude and flexibility unmatched by amps more than twice its size, Micro Spider has a larger-than-life Napoleon complex. Four Spider III amp models, a new acoustic guitar model and six Smart Control FX give Micro Spider a wide tonal range and real sonic versatility. And with POD® 2.0 -style direct out, Micro Spider is ideal for practicing with headphones and hassle-free direct recording.
Thereʼs a lot of muscle in this raucous little box: the sound of six C batteries pushing six watts of screaming electricity through a 6.5' speaker has never sounded so ferocious. Plus, with its integrated chromatic tuner, Micro Spider has everything you need—wherever you are.Rugged, reliable and ready to go, Micro Spider is always at your side whenever inspiration strikes.
Micro Spider™ offers a wide tonal range like the one made famous by its older siblings in the Spider family. Experience the brilliant on-the-go tones perfect for electric guitar or acoustic guitar. Plus, with its mic input, Micro Spider has a lot to say for such a small box.
Power: 6 Watts
Power: 5 Watt
Effects: Υes
Speaker: 6.5''
Effect: 6 Effects - Chorus, Flanger, Phaser, Tremolo, Sweep Echo, Tape Echo, Reverb
Speaker: 1 x 6,5''
Modeling Technology: Yes - Clean, Crunch, Metal, Insane, Acoustic
Sounds: -
Modeling Technology: Yes
Tuner: Υes
Channels: -
Equalizer: 3 band
Ηeadphones: Υes
FX Loop: No
Outs: 1/4'' Headphones output, POD® 2.0-style direct output
Inputs: 1/4'' Guitar, 1/4'' Microphone, Mini-jack Stereo MP3/CD
Lamps: No
Tuner: Yes / Chromatic
Tubes: -
Controls: Microphone, Drive, 3-band EQ, Channel Volume, Master Volume
Footswitch: -
FX Loop: -
Dimensions ( W x H x D ): 24,1 cm x 25 cm x 17.8 cm
Weight: 3,17 kg |
Vox DA15 15W Guitar Amplifier
Introducing the affordable, portable DA15 Digital Amp from VOX. Don't let the small size fool you. This rugged little beast boasts some killer bells and whistles, such as 11 distinctive sound styles ranging from clean to high gain, 11 great sounding, digital effects, a ???knob-based?? control panel that's really easy to use plus a whole lot more.
Specifications:
Number of Styles: 11
Number of Effects: 11 plus noise reduction
Signal Processing: 24-bit (both A/D and D/A conversion), 44.1 kHz sampling frequency
Input/Output Jacks: INPUT, FOOT SW, LINE/PHONE
Power Amp Output: Maximum 15W RMS @ 8 ohms
Speaker: 1 x 8 inch, VOX original (8 ohm)
Power Supply: Local Mains
Dimensions: 16.81?? x 8.90?? x 15.24?? (W x D x H)
Weight: 22.05 lbs
Options: VFS2 Dual Foot Switch
| The MS-4 is the ultimate in portable battery/mains adapter operated micro amps, packing a full 4 Watt of Marshall tone into a tiny case. This mighty micro Marshall half-stack has switchable Clean and Overdrive modes. A single Tone control provides full focus of bass to treble.
Technical Info
Dimensions (H x W x D): 26 x 11 x 6cm
Finished in traditional Marshall black
White logo
Gold panel
Power Supply: 9V Battery or AC adaptor (not included).
Headphone Out. |
* 30-watt, 2x12" combo guitar amplifier
* Two channels with independent volume controls — Normal and Top Boost
* Reverb and Tremolo effects onboard (controllable via optional footswitch)
* Master volume section with Tone Cut and Volume controls
* True bypass effects loop for bringing in your own pedals
* Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
* 16-ohm output jack for running a cabinet along with the internal speakers
* Features two 12" 8-ohm Celestion G12M Greenback speakers
* Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
* Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
* Weight: 70.99 lbs.
|
- Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
- 2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
- Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
- Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
- Revolutionary INFINIUM Tube Life Multiplier technology:
- Extends the life of your amplifierʼs expensive power valves up to 20 times.
- Provides incredible reliability and consistent tone over the complete lifespan of your valves
- No need for expensive matched valve sets
- Allows you to mix and match any combination of compatible valve types and brands
- Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement
- Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
- Power amp damping switchable (High, Medium, Low) for total sound control
- Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
- Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
- Line output with dedicated Level control
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged constructionensure long life
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
Reviews
There are no reviews yet.