Content |
Transmitter of the G-10 Set. To be used with the Line 6 amplifiers with an embedded receiver, Spider V 60, Spider V 120 και Spider V 240.
The receiver is not included, therefore it cannot be used as a stand alone wireless system. |
- The ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| Frequency Range | 480~544MHz(US & EU)
540~604MHz(US & EU)
636~700MHz(EU)
696~760MHz(EU)
760~824MHz | | | Bandwidth | 64 MHz | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | Channel Grid | 25 kHz | | | Channel Set-up | Scan & ACT sync | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | Audio Compression | 2nd Generation DSP inertial coding | | | Latency | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | S/N Ratio (analog output) | > 115dB(A) | | | T.H.D. | | | | Encryption | 256 bit | | | Receivers | | | Chassis /Channel | EIA Standard 19 " 1/2U, Single | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | Image and Spurious Rejection | > 85dB | | | Receiving Mode | Digital Diversity | | | Analog Output | Balanced XLR × 1
Unbalanced 6.3 mm (1/4 ") × 1 | | | Analog Output Switch | Mic / Line × 1 | | | Digital Audio Interface | AES3id output. BNC female × 1 | | | Digital Equalizer | 10 microphone capsule modeling presets | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | Display | Full-color VFD | | | Battery Meter | Transmitter battery status | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | Power Supply | External AC power supply, 12~15V DC, 1A; Power Consumption: 7.5W | | | Dimensions (W×H×D) | 210 × 44 × 230 mm (8.3 × 1.7 × 9 ") | | | Weight | Approx. 1.1 kg (2.4 lbs) | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | Operating Temperature | -10~+60 ℃ | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
| Achieve onstage mobility at the touch of a button!
Set yourself free with the Alesis GuitarLink Wireless system. Compact, clear sounding, and easy to use, GuitarLink Wireless provides unrestricted action as you move about the stage with your guitar or bass. The unique receiver is battery powered, and small enough to sit anywhere—even in your pedalboard!
ALL-IN-ONE TRANSMITTER
Powered by two AAA batteries, the GuitarLink Wireless transmitter is compact and unobtrusive, so it wonʼt interfere with your playing. The attached cable plugs directly into your guitar or bass. Using the integrated metal clip, the GuitarLInk Wireless transmitter can attach to either your strap, or right to your belt for added comfort.
COMPACT RECEIVER
Unlike bulkier wireless receivers, the GuitarLink Wireless receiver is compact, and is also powered by two AAA batteries. This rare combination provides added versatility, so you can put the receiver almost anywhere. Set it on top of your amp. Mount it to your pedalboard. Place it in your effects rack. The GuitarLink Wireless receiver is ready for anything. Bypass the batteries with the external power adapter for a more permanent setup.
EFFORTLESS AND EFFICIENT
The GuitarLink Wireless system operates in the reliable 2.4 GHz frequency spectrum to provide a clear signal free from interference. After turning both units on, simply press the Pairing buttons on both units to make the connection |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
Technical Data
RF frequency range 518..... 866 MHz
Transmission/receiving frequencies 1440
Presets 4
Switching bandwidth 36 MHz
Peak deviation +/- 48 kHz
Compander HDX
Frequency response (microphone) 40.....18000 Hz
Signal-to-noise ratio > 110 dB(A)
THD, total harmonic distortion
In compliance with ETS 300422 , ETS 300445 , CE , FCC
Antenna connector 2 BNC, 50 Ohm
Audio-XLR connector 6,3 mm
Audio output level (balanced) XLR: +18 dBu max
Audio output level (unbalanced) Jack: +12 dBu max
Power supply 10,5 - 16 V DC battery AA (Mignon)
Dimensions (Receiver) 212 x 145 x 38 mm
Weight (Receiver) 1100 g
RF output power 30 mW
Power supply 2x 1.5 V battery AA (Mignon)
Operating time (transmitter) > 8 h
Input voltage range 1,8 V line
Input voltage range 2,4 V line
Dimensions (Transmitter) 82 x 64 x 24 mm
Weight (Transmitter) 158 g
|
Reviews
There are no reviews yet.