Content |
For vocalists, performers and active spoken word presenters, the XD-V55 family sets new standards for reliability, ease of use and superior audio quality. All XD-V55 systems – both handheld and bodypack – feature patented digital technologies that deliver sound so impressive they inspire confident, great sounding performances. Including a handheld system featuring four superb microphone models, a lavalier system with three EQ filter models and a headset featuring a high-end omnidirectional microphone capsule, the XD-V55 family is the right choice. The mic modeling delivers great sound, which remains pristine from your lips to your audienceʼs ears thanks to the 24-bit performance. DCL™ (Digital Channel Lock) technology keeps your signal safe the entire time.
|
System Specifications - Operating Frequencies: UHF band - Band C: 541.500 MHz to 566.375 MHz (996 frequencies) - Band D: 655.500 MHz to 680.375 MHz (996 frequencies) - Band I: 482.000 MHz to 507.000 MHz (1001 frequencies) - Not all frequencies are available in all areas. Please check with local regulations. - Minimum Frequency Step: 25 kHz - Modulation Mode: FM - Maximum Deviation: +/-35 kHz - Dynamic Range: > 110 dB (A-weighted), typical - Total Harmonic Distortion: < 1% (at 1 kHz, +/-17.5 kHz deviation) - Operating Range: 100 m (300\'), typical - Open range environment with no interfering signals. - Operating Temperature Range: -5o C to +45o C (23o F to 113o F) - Battery and LCD performance may be reduced at very low temperatures. - Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB) Receiver - Receiving System: True diversity - Image Rejection: 60 dB nominal, 55 dB minimum - RF Sensitivity: 20 dBuV at 60 dB S/N ratio - Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV - Antenna Input: BNC-type, 50 ohms - Bias voltage 12V DC, 60 mA, each - Power Requirements: 12-18V DC, 500 mA - Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H, not including BNC connectors or feet. - Net Weight: 1.1 kg (38.8 oz), without accessories - Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters Handheld Transmitter - RF Power Output: High: 30 mW; Low: 10 mW, (switchable), at 50 ohms - Spurious Emissions: Following federal and national regulations - Microphone Element: ATW-T341b: Dynamic cardioid - Batteries: Two 1.5V AA, not included - Battery Life: High: 6 hours (alkaline) - Low: 8 hours (alkaline) - Depending on battery type and use pattern. - Dimensions: ATW-T341b: 237.0 mm (9.33“) long, 48.0 mm (1.89“) diameter - Net Weight: ATW-T341b: 284 g (10.0 oz), without batteries - Accessory Included: AT8456a Quiet-Flex(TM) stand clamp Dimensions and Weight in PackagingChannel D (655.500 MHz to 680.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel I (482.000 MHz to 507.000 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel C (541.500 MHz to 566.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 16 x 14 x 4 in
|
The AVX-ME2 SET is the perfect digital wireless microphone for film projects. The system fully self configures and is ready to film within seconds. Its ultra compact receiver fits directly into the XLR audio input of your camera or recording device. The bodypack transmitter and lavalier microphone is ideal for hands-free interview and documentary situations.
The AVX-ME2 SET includes a bodypack transmitter with lavalier microphone, the plug on receiver and all accesories to operate out of the box with camcorders as well as DSLR cameras. It features self configuring digital transmission which eliminates time-consuming radio frequency setup. The ultra compact receiver rotates around the XLR connector to avoid collision with other devices mounted on your camera. It switches on and off automatically with your camera - saving battery power. The AVX matches perfectly to your camera's input sensitivity without having to adjust the audio level on the microphone. From professional wedding video to documentaries, from street interviews to corporate videos, the AVX just works allowing you to concentrate on creativity.
Features -
Very fast setup
-
Plugs directly into XLR audio input
-
Ultra compact receiver
-
Switches on/off by P48 Phantom power
-
Optimized dynamic range
-
Auto frequency management
-
AES 256 encryption
-
License free
-
Accessories included for DSLR use
-
Metal housing
-
Made in Germany
|
- For Presenters and Performers
- Beta 58A Supercardioid Mic/Transmitter
- Single-Channel Tabletop Receiver
- Internal Antenna Diversity
- 123 Auto-Scan Frequencies
- 14-Hr AA Batteries
- Expandable to 12 Mic Channels/300' Range
The Shure BLX24/B58 brings performers and presenters a cost-effective wireless handheld microphone system with quality sound, simple setup, intuitive operation, and dependable performance right out of the box. It includes the compact and lightweight BLX4 single-channel tabletop receiver with internal antennas, ideal for portable use.
The BLX24/B58 also includes a handheld transmitter equipped with an integrated Beta 58A dynamic supercardioid microphone capsule optimized for crisp, present vocals with a brightened midrange and bass roll-off to control the proximity effect. The receiver features one-touch QuickScan frequency selection to quickly search 123 available frequencies and locate a clean RF channel in case of interference. It provides up to 14 hours of continuous use with two AA batteries, at a range up to 300'. Up to 12 mic channels can operate simultaneously in each frequency band.
This streamlined system is well suited for live performances and events in small venues, wedding halls, and houses of worship, as well as conference, educational, and corporate facilities.
The Beta 58A dynamic capsule features a neodymium magnet for greater sensitivity and higher output, as well as a tight supercardioid polar pattern that greatly minimizes background noise and feedback. The dent-resistant steel mesh grille resists wear and abuse. The built-in pop filter reduces undesirable wind and breath noise for clear and intelligible speech.
The durable BLX2 handheld transmitter offers a lightweight, ergonomic design, and is comfortable to hold. Group and channel selection buttons allow for quick and simple frequency matching with the receiver. Other features include an easily accessible on/off button, adjustable gain control, and a black identification cap. The WA621 Color ID Caps kit containing assorted colored caps is available as an optional accessory.
The BLX4 receiver employs a microprocessor-controlled internal antenna diversity feature to improve the quality and reliability of your wireless audio. An LED display shows group and channel settings, while two LED lights indicate when the system is ready for use and the strength of the incoming audio signal. The unit offers 1/4" and XLR outputs for connectivity to PA systems and mixing boards.
Shure offers a BLX1 bodypack transmitter compatible with a variety of lavalier, instrument, and headset microphone options to adapt your BLX system as your needs evolve.
- The discrete MX153 sub-miniature earset mic provides exceptional clarity in spoken word applications.
- The PGA31 is a comfortable, durable headset microphone for active performance.
- Instrumentalists can attach the WB98H/C flexible gooseneck instrument microphone for brass, woodwind, and percussion applications.
- The WA302 guitar cable lets you connect the bodypack transmitter to a guitar or bass.
Wireless Technology |
Analog UHF |
Number of RF Channel Frequencies |
123 |
Included Transmitters |
1x Handheld |
Diversity |
Antenna Diversity |
RF Frequency Band |
H8E: 518 to 542 MHz |
RF Bandwidth |
24 MHz |
RF Channel Scanning |
Auto-Scan |
Max Operating Range |
300' / 91.4 m (Line of Sight) |
Max Transmitters per Band |
12 |
Dynamic Range |
100 dBA |
Receiver
Receiver Type |
Tabletop |
Antenna |
2x Internal, Fixed |
Number of Audio Channels |
1 |
Audio I/O |
1x XLR 3-Pin Male Balanced Output
1x 1/4" TRS Female Unbalanced Output |
Audio Output Level |
XLR Output:
-27 dBV (Mic Level)
1/4" Output:
-13 dBV (Instrument Level) |
Frequency Response |
50 Hz to 15 kHz (Dependent on Mic) |
Impedance |
XLR Output:
200 Ohms
1/4" Output:
50 Ohms |
Power Requirements |
AC/DC Power Adapter |
AC/DC Power Adapter |
12 to 15 VDC at 160 mA, Center-Positive (Included) |
AC Input Power |
110 to 240 VAC, 50 / 60 Hz |
Display & Indicators |
1x Multi-Segment LED (Channel, Group)
2x LED (AF Level, Sync) |
Housing |
ABS |
Operating Temperature |
0 to 135°F / -17 to 57°C |
Dimensions |
7.4 x 1.6 x 4.1" / 188 x 40 x 103 mm |
Weight |
8.5 oz / 241 g |
Transmitter
Transmitter Type |
Handheld |
RF Output Power |
10 mW |
Audio I/O |
No |
Muting |
Off/On Switch |
Auto-Level Control |
No |
Gain Range |
-20 to -10 dB |
Sync Method |
Manual |
Antenna |
1x Internal (Handheld) |
Power Requirements |
Battery |
Battery Type |
2x AA (Included) |
Approx. Battery Life |
14 Hours (Alkaline) |
Display & Indicators |
1x Multi-Segment LED (Channel, Group)
1x LED (Battery Status, Power) |
Housing |
ABS |
Dimensions |
2.5 x 4.3 x 0.8" / 64 x 110 x 21 mm |
Weight |
7.7 oz / 218 g (without Batteries) |
Microphone
Microphone Type |
Handheld Capsule |
Sound Field |
Mono |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Frequency Range |
50 Hz to 16 kHz |
Sensitivity |
-51 dBV/Pa at 1 kHz |
|
SLX2/SM58 Handheld Microphone/Transmitter
Frequency response tailored for vocals, with brightened midrange and bass Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
Pneumatic shock-mount system cuts down handling noise
Effective, built-in spherical wind and pop filter
Supplied with break-resistant stand adapter which rotates 180 degrees
Legendary Shure quality, ruggedness and reliability
Cardioid (unidirectional) dynamic
Frequency response: 50 to 15,000 Hz
Automatic Transmitter Setup
Backlit LCD with timeout feature
SLX4 Receiver
Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24 MHz bandwidth
Detachable 1/4 wave antennas
Microprocessor-controlled diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
XLR and 1/4" outputs
|
MicLink Wireless aims to take the complexity, frustration, and cost out of traditional wireless systems - creating a flexible, all-in-one solution that gets you up and running with the dynamic mic of your choice.
Main features
- Universal XLR transmitter converts any Lo-Z dynamic microphone into a wireless system
- Simple single-button pairing of transmitter/receiver; connects in seconds
- Enjoy up to 60 feet (18.3 m) of reliable connectivity and over 6 hours of battery life
- Lithium ion-powered transmitter conveniently recharges via USB
- Connect up to 5 wireless systems simultaneously
- Reliable 2.4 GHz spectrum; 14 Channels
- Compact receiver with 1/4' out and antenna; powered via battery (AAAx3) or included AC adapter
- Ideal for all but the largest sound environments: Small to medium stages, karaoke, public speaking, wedding, business presentations, and beyond
|
Reviews
There are no reviews yet.