Content |
M1001 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M1001 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M1001 wall or ceiling mounted, with reference to the several possible applications. The M1001 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system. The M1001 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
General Specs
High Quality 2-way passive loudspeaker 1 x 10" woofer, vented 1 x 1" driver, on 90°x60° CD horn High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver 300W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:60 Hz ÷ 20000 Hz Max SPL @ 1m:128 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:97 dB Nominal Impedance:8 Ω Power Handling:300 W Peak Power Handling:1200 W Recommended Amplifier:600 W Protections:Dynamic Crossover frequencies:1700 Hz
Inputs/Outputs
Input connector:4-pin EUROBLOCK Height:500 / 19.68 mm/inch Width:265/ 10.43 mm/inch Depth:320 / 12.60 mm/inch Net Weight:13.2 / 29.08 kg/lbs |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
- Equipped with: 2" tweeter and 10" woofer
- Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
- Rated power: 700 W (PGM)
- Biamp mode
- Setting for floor monitor
- Lightweight but durable wooden cabinet with high quality polyurea coating
- Stand flange mount for two angles
- Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
- Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
- Weight: 14.0 kg
|
- 38 Hz to 17 kHz frequency range
(-10 dB) - 250W pink noise, 500 watts continuous program power capacity
- 120 x 110 degree coverage horn
- 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
- 4 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 30-WH)
- Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
- Net Weight: 18.9 kg (42 lb)
|
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
Spec. | Enclosure | Sealed type | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | Rated Impedance | 8 ohms | Sound Pressure Level | 96dB (1W, 1m) | Frequency Response | 100 - 20,000Hz | Crossover Frequency | 2.5kHz (passive network) | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | Dimensions (W × H × D) | 460 × 310 × 200mm | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | |
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
- 2-way, bass reflex design
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- ORIGINAL / LIVE The renowned, smooth FBT sound
- VOCAL A special EQ setting to maximise speech intelligibility
- DJ Designed to keep the energy high and your audience dancing
- TOURING The reliability and the roar of the industry’s most popular touring systems
- LOUDNESS The ultimate preset for listening at a medium or low volume
- WARM A special setting to emphasise full-bodied, low-mid frequencies.
Code: |
40682 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
80° x 50° rotatable HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
HP 50Hz - 12-24dB/oct |
Input connector: |
2 x SPEAKON |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.1/33.28 kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
17.6/38.80 kg/lb |
|
Reviews
There are no reviews yet.