M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to […]
M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution. The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter. The LICC crossover design includes a protection on high frequency device
APPLICATIONS
• Multimedia Environments
• Conference Halls
• Pubs
• Café
• Background and Foreground Business Music
• Delay Fill
• Place of Worships
• PA Systems
General Specs
High Quality 2-way passive loudspeaker
1 x 5.5″ woofer, vented
1 x 1″ in driver, on 90°x90° CD horn
High Power Handling ‘Low Impedance Compensated Crossover\’, with electronic protection for the driver
80W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:80Hz ÷ 20000 Hz
Max SPL @ 1m:114dB
Horizontal coverage angle:90°
Vertical coverage angle:90°
Directivity index; Q:10
System Sensitivity:89dB
Nominal Impedance:8Ω
Power Handling:80W
Peak Power Handling:320W
Recommended Amplifier:160W
Protections:PTC
Crossover frequencies:1900Hz
Cabinet Specs
Cabinet Material:MDF 12 mm
Hardware:6 x M6, 2 x M10
Grille:Steel, with a robust double mesh polyester clothing
Colour:Black
Size/Weight
Height:303 / 11.92mm/inch
Width:175 / 6.88mm/inch
Depth:185 / 7.28mm/inch
Net Weight:5 / 11kg/lbs
System Parameters
Compression Driver:1″ HFdriver, 1″ voice coil
Nominal Impedance:8Ω
Input Power Rating:10W AES
Sensitivity:90dB
Woofer:5″ Woofer, 1.2″ voice coil
Nominal Impedance:8Ω
Input Power Rating:80W AES
Sensitivity:87dB
Weight
5.00 kg
Reviews
There are no reviews yet.
Be the first to review “RCF M501 2-way Passive speaker – 5.5″ – 1″ – 90×90°horn – 80W” Cancel reply
M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution. The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter. The LICC crossover design includes a protection on high frequency device
APPLICATIONS
• Multimedia Environments
• Conference Halls
• Pubs
• Café
• Background and Foreground Business Music
• Delay Fill
• Place of Worships
• PA Systems
General Specs
High Quality 2-way passive loudspeaker
1 x 5.5" woofer, vented
1 x 1" in driver, on 90°x90° CD horn
High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
80W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:80Hz ÷ 20000 Hz
Max SPL @ 1m:114dB
Horizontal coverage angle:90°
Vertical coverage angle:90°
Directivity index; Q:10
System Sensitivity:89dB
Nominal Impedance:8Ω
Power Handling:80W
Peak Power Handling:320W
Recommended Amplifier:160W
Protections:PTC
Crossover frequencies:1900Hz
Cabinet Specs
Cabinet Material:MDF 12 mm
Hardware:6 x M6, 2 x M10
Grille:Steel, with a robust double mesh polyester clothing
Colour:Black
Size/Weight
Height:303 / 11.92mm/inch
Width:175 / 6.88mm/inch
Depth:185 / 7.28mm/inch
Net Weight:5 / 11kg/lbs
System Parameters
Compression Driver:1" HFdriver, 1" voice coil
Nominal Impedance:8Ω
Input Power Rating:10W AES
Sensitivity:90dB
Woofer:5" Woofer, 1.2" voice coil
Nominal Impedance:8Ω
Input Power Rating:80W AES
Sensitivity:87dB
PRICE IS PER PIECE AND NOT PER PAIR!
70 Hz to 23 kHz frequency range (-10 dB)
200 watts continuous program power capacity
87 dB sensitivity (1W/1m)
100° x 100° nominal dispersion
60W, 30W, 15W, 7.5W taps at 70V
60W, 30W, 15W taps at 100V
8 ohms bypass
3 kHz crossover frequency
High-Impact Polystyrene (HIPS) enclosure
Video shielded for use near video monitors
Stainless steel grille for harsh environments
Zinc-plated screw down input terminal strip
Available in black or white (Control 25AV-WH)
Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
Net Weight: 4.0 kg (9 lb)
Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket
85 Hz to 22 kHz frequency range (-10 dB)
50 watts continuous program power capacity
86 dB sensitivity (1W/1m)
8 ohms nominal impedance
3.5 kHz crossover frequency
High-Impact Polystyrene (HIPS) enclosure
Spring-loaded input terminals
Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam
Order No.
D 113 127
Cabinet
Full-Range
Configuration
Passive 2-Way
Nominal impedance
16 Ohms
Rated power RMS
150 Watts
Program power
300 Watts
Peak power
600 Watts
SPL 1W / 1m 4V / 16Ohm
94 dB
Max. SPL 1m(calculated with peak power)
122 dB
Frequency range ( -10dB ) Full range
90Hz - 20kHz
Frequency range ( -10dB ) measured with H5000-RCM26 preset
60Hz - 20kHz
Coverage angle nominal
90° *40°
Passive crossover frequency
2.2kHz
Voice coil tracking protection
Halogen
Component HIGH
Electro-Voice DH 3
Order No.
353 078
Component LOW
DND 6130-16
Order No.
366 420
Connectors Full-Range
1+, 1-
Wired through
1+, 1-
Connector modelSpeakon
2x NL4 MPR
Dimensions (WxHxD)
217x375x230 mm
Shipping weight
10 kg
Net weight
8 kg
Enclosure material
Birch plywood
Finish
Black 2-component paint
Grille
Powder coated steel, acoustic foam
Warranty
36 Months
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.