Content |
M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution. The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter. The LICC crossover design includes a protection on high frequency device
APPLICATIONS
- • Multimedia Environments
- • Conference Halls
- • Pubs
- • Café
- • Background and Foreground Business Music
- • Delay Fill
- • Place of Worships
- • PA Systems
General Specs
- High Quality 2-way passive loudspeaker
- 1 x 5.5" woofer, vented
- 1 x 1" in driver, on 90°x90° CD horn
- High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
- 80W AES power handling
- Steel Front Grille with robust double mesh polyester clothing
- Rotatable RCF front logo
- Installation points are available on the rear panel, top and bottom
- All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
- Frequency Response -10 dB:80Hz ÷ 20000 Hz
- Max SPL @ 1m:114dB
- Horizontal coverage angle:90°
- Vertical coverage angle:90°
- Directivity index; Q:10
- System Sensitivity:89dB
- Nominal Impedance:8Ω
- Power Handling:80W
- Peak Power Handling:320W
- Recommended Amplifier:160W
- Protections:PTC
- Crossover frequencies:1900Hz
Cabinet Specs
- Cabinet Material:MDF 12 mm
- Hardware:6 x M6, 2 x M10
- Grille:Steel, with a robust double mesh polyester clothing
- Colour:Black
Size/Weight
- Height:303 / 11.92mm/inch
- Width:175 / 6.88mm/inch
- Depth:185 / 7.28mm/inch
- Net Weight:5 / 11kg/lbs
System Parameters
- Compression Driver:1" HFdriver, 1" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:10W AES
- Sensitivity:90dB
- Woofer:5" Woofer, 1.2" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:80W AES
- Sensitivity:87dB
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
- 85 Hz to 22 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
| Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket |
Reviews
There are no reviews yet.