RCF M501 2-way Passive speaker – 5.5″ – 1″ – 90×90°horn – 80W

212.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications. Available mounting accessories allow you to […]

 

Read more

M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications.
Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution.
The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter.
The LICC crossover design includes a protection on high frequency device

APPLICATIONS

  • • Multimedia Environments
  • • Conference Halls
  • • Pubs
  • • Café
  • • Background and Foreground Business Music
  • • Delay Fill
  • • Place of Worships
  • • PA Systems

General Specs

  • High Quality 2-way passive loudspeaker
  • 1 x 5.5″ woofer, vented
  • 1 x 1″ in driver, on 90°x90° CD horn
  • High Power Handling ‘Low Impedance Compensated Crossover\’, with electronic protection for the driver
  • 80W AES power handling
  • Steel Front Grille with robust double mesh polyester clothing
  • Rotatable RCF front logo
  • Installation points are available on the rear panel, top and bottom
  • All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)

Acoustical Specs

  • Frequency Response -10 dB:80Hz ÷ 20000 Hz
  • Max SPL @ 1m:114dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:90°
  • Directivity index; Q:10
  • System Sensitivity:89dB
  • Nominal Impedance:8Ω
  • Power Handling:80W
  • Peak Power Handling:320W
  • Recommended Amplifier:160W
  • Protections:PTC
  • Crossover frequencies:1900Hz

Cabinet Specs

  • Cabinet Material:MDF 12 mm
  • Hardware:6 x M6, 2 x M10
  • Grille:Steel, with a robust double mesh polyester clothing
  • Colour:Black

Size/Weight

  • Height:303 / 11.92mm/inch
  • Width:175 / 6.88mm/inch
  • Depth:185 / 7.28mm/inch
  • Net Weight:5 / 11kg/lbs

System Parameters

  • Compression Driver:1″ HFdriver, 1″ voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:10W AES
  • Sensitivity:90dB
  • Woofer:5″ Woofer, 1.2″ voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:80W AES
  • Sensitivity:87dB
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF M501 2-way Passive speaker – 5.5″ – 1″ – 90×90°horn – 80W”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF M501 2-way Passive speaker - 5.5" - 1" - 90x90°horn - 80W removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA SR-H2L Line Array Loudspeaker 180W (White) removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeTOA F-160WP 2-Way Loudspeaker Weatherproof Speaker 30W 100V remove
NameRCF M501 2-way Passive speaker - 5.5" - 1" - 90x90°horn - 80W removeJBL CONTROL 25AV - 5.25'' 2-way Monitor Speaker 120W (Black) removeTOA SR-H2L Line Array Loudspeaker 180W (White) removeDYNACORD VariLine VL62W Fullrange 2-Way Speaker 150W (White) removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeTOA F-160WP 2-Way Loudspeaker Weatherproof Speaker 30W 100V remove
Imagef-160wp_toa_loudspeaker
SKU13041002CONTROL 25AVSR-H2LE009310CONTROL 25AV WHITEF-160WP
Rating
Price212.00 incl. GR VAT 274.99 incl. GR VAT 514.00 incl. GR VAT 1,399.00 incl. GR VAT 274.99 incl. GR VAT 134.90 incl. GR VAT
Stock

In stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

In stock

AvailabilityIn stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications.
Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution.
The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter.
The LICC crossover design includes a protection on high frequency device

APPLICATIONS
  • • Multimedia Environments
  • • Conference Halls
  • • Pubs
  • • Café
  • • Background and Foreground Business Music
  • • Delay Fill
  • • Place of Worships
  • • PA Systems

General Specs

  • High Quality 2-way passive loudspeaker
  • 1 x 5.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
  • 80W AES power handling
  • Steel Front Grille with robust double mesh polyester clothing
  • Rotatable RCF front logo
  • Installation points are available on the rear panel, top and bottom
  • All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)

Acoustical Specs

  • Frequency Response -10 dB:80Hz ÷ 20000 Hz
  • Max SPL @ 1m:114dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:90°
  • Directivity index; Q:10
  • System Sensitivity:89dB
  • Nominal Impedance:8Ω
  • Power Handling:80W
  • Peak Power Handling:320W
  • Recommended Amplifier:160W
  • Protections:PTC
  • Crossover frequencies:1900Hz

Cabinet Specs

  • Cabinet Material:MDF 12 mm
  • Hardware:6 x M6, 2 x M10
  • Grille:Steel, with a robust double mesh polyester clothing
  • Colour:Black

Size/Weight

  • Height:303 / 11.92mm/inch
  • Width:175 / 6.88mm/inch
  • Depth:185 / 7.28mm/inch
  • Net Weight:5 / 11kg/lbs

System Parameters

  • Compression Driver:1" HFdriver, 1" voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:10W AES
  • Sensitivity:90dB
  • Woofer:5" Woofer, 1.2" voice coil
  • Nominal Impedance:8Ω
  • Input Power Rating:80W AES
  • Sensitivity:87dB

PRICE IS PER PIECE AND NOT PER PAIR

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)

The SR-H2L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 668.4 (H) × 115 (D) mm (3.31" × 26.31" × 4.53“)
Weight 4.4 kg (9.7 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam

PRICE IS PER PIECE AND NOT PER PAIR!

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)
  • Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
  • Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
  • High 30W rated input power and 91 dB output sound pressure level.
  • Durable, acoustically efficient polypropylene enclosure.
  • Optional wall/under-eaves mounting bracket.
Specification
Enclosure Type Bass-reflex type
Speaker Component Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm)
Impedance 100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W)
Rated Input Power 30W
Output Sound Pressure Level 91 dB (1W/1m)**
Crossover Frequency 4kHz (passive network)
Frequency Response 100-20,000Hz (-10dB), 150-13,000Hz (-3dB)
Input Connector Push terminal
Enclosure Material Polypropylene resin
Color Dark gray
Dimensions (W x H x D): 250 x 157 x 169mm
Weight approx. 3.9kg
** Pink noise of 330~3,300Hz
Weight5.00 kg4.00 kg4.40 kg10.00 kg4.00 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 4.00 kg
Weight 4.40 kg
Weight 10.00 kg
Weight 4.00 kg
Weight 4.00 kg