| Content |
M 502 is a multipurpose two-way twin-woofer full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 502 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 502 wall or ceiling mounted, with reference to the several possible applications.
The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution.
The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
APPLICATIONS
- • Multimedia Environments
- • Conference Halls
- • Pubs
- • Café
- • Background and Foreground Business Music
- • Delay Fill
- • Place of Worships
- • Under-Balcony
General Specs
- High Quality 2-way passive loudspeaker
- 2 x 5.5" woofer, vented
- 1 x 1" in driver, on 90°x90° CD horn
- High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
- 100W AES power handling
- Steel Front Grille with robust double mesh polyester clothing
- Rotatable RCF front logo
- Installation points are available on the rear panel, top and bottom
- All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
- Frequency Response -10 dB:80Hz ÷ 20000 Hz
- Max SPL @ 1m:116dB
- Horizontal coverage angle:90°
- Vertical coverage angle:90°
- Directivity index; Q:9
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:100W
- Peak Power Handling:400W
- Recommended Amplifier:200W
- Protections:Dynamic
- Crossover frequencies:2300Hz
Cabinet Specs
- Cabinet Material:MDF 12 mm
- Hardware:6 x M6, 2 x M10
- Grille:Steel, with a robust double mesh polyester clothing
- Colour:Black
Size/Weight
- Height:470 / 18.50mm/inch
- Width:175 / 6.88mm/inch
- Depth:185 / 7.28mm/inch
- Net Weight:7.5 / 16.5kg/lbs
System Parameters
- Compression Driver:1" HF driver, 1.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:25W AES
- Sensitivity:106dB
- Woofer:2 x 5.5" Woofer, 1.2" voice coil
- Nominal Impedance:16Ω
- Input Power Rating:80W AES
- Sensitivity:88dB
|
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
|
PRICE IS PER PIECE AND NOT PER PAIR!
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood
| PRICE PER Pair
EVID 6.2EVID Seri es Twin 6" Surface Mount Speaker System
Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is
perfect for applications that require exemplary audio and the capability to fill large
areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system
provides the versatility to accommodate any installation challenge. EV's unique 6-
inch dual woofer design delivers crisp and clean program for the utmost in listening
experience regardless of the location. Great for larger areas that demand higher SPL
levels, the 6.2 delivers the outstanding, full bass output required for shopping malls,
stadiums, airports, etc.
Specifications
Max. SPL / 1m (calc); full space 122 dB
System Power Handling (continuous/program/peak) 150/300/600 Watts
Coverage (nominal -6dB) H° 100 °
Coverage (nominal -6dB) V° 80 °
Nominal Impedance 8 Ohms
Minimum Impedance 6 Ohms
Frequency Response (-10dB) 62 - 20000 Hz
Input Connections Spring Terminal
Sensitivity 1W/1m 94 dB
Transformer Taps (Transformer Version Only) 70V/100V:15W, 30W, 60W
Chassis Size 6 inches
Weight Net 5.3 kg ( 11.68 lbs )
Dimensions (HxWxD) 419 x 228 x 298 mm
(16.5" x 8.98" x 11.73“) |
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
Reviews
There are no reviews yet.