| Content |
M 601 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing makes M 601 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M 601 wall or ceiling mounted, with reference to the several possible applications.
The M 601 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system.
The M 601 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
APPLICATIONS
- • Multimedia Environments
- • Conference Halls
- • Pubs
- • Café
- • Background and Foreground Business Music
- • Delay Fill
- • Place of Worships
- • PA Systems
General Specs
- High Quality 2-way passive loudspeaker
- 1 x 6.5" woofer, vented
- 1 x 1" in driver, on 90°x90° CD horn
- High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
- 100W AES power handling
- Steel Front Grille with robust double mesh polyester clothing
- Rotatable RCF front logo
- Installation points are available on the rear panel, top and bottom
- All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
- Frequency Response -10 dB:80Hz ÷ 20000 Hz
- Max SPL @ 1m:118dB
- Horizontal coverage angle:90°
- Vertical coverage angle:90°
- Directivity index; Q:10
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:100W
- Peak Power Handling:400W
- Recommended Amplifier:200W
- Protections:Dynamic
- Crossover frequencies:2200Hz
Cabinet Specs
- Cabinet Material:MDF 12 mm
- Hardware:6 x M6, 2 x M10
- Grille:Steel, with a robust double mesh polyester clothing
- Colour:Black
Size/Weight
- Height:359 / 14.13mm/inch
- Width:215 / 8.46mm/inch
- Depth:230 / 9.05mm/inch
- Net Weight:6.9 / 15.18kg/lbs
System Parameters
- Compression Driver:1" HFdriver, 1.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:25W AES
- Sensitivity:106/strong>dB
- Woofer:6,5" Woofer, 1.2" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:80W AES
- Sensitivity:92dB
|
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb
|
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
| Power supply: | 230 V AC, 50 Hz ~ | | Power consumption: | 125 W | | Amplifier power: | 80 W | | Components: | 8" woofer, 1 tweeter | | Inputs: | | 1 Line In | XLR | | Outputs: | | 1 Line Out | XLR | | Max. SPL: | 90 dB | | Impedance: | 8 Ohms | | Frequency-range: | 40 Hz - 20 kHz | | Dimensions (H x W x D): | 360 x 270 x 240 mm | | Weight: | 8 kg (piece) | |
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
| Features |
|---|
| Weatherproof cabinet IP 55 | | Aluminium grill and stainless steel bracket | | Two 8" high-output LF transducer with 2.5" voice coil | | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | | 110° x 60° constant directivity horn | | Built in passive crossover | | 2° x 15° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | |
LICC (Low Impedance Compensated Crossover) network
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 129 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 60° | | | Directivity index; Q: | 9 | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 400 Watt | | | Peak Power Handling: | 1600 Watt | | | Recommended Amplifier: | 800 | | | Protections: | Dinamyc | | | Crossover frequencies: | 1100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 90 Watt AES | | | Sensitivity: | 110 dB | | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 300 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 4 pole Amphenol | |
| CABINET |
|---|
| Cabinet Material: | 8 mm Polyethylene rotomoulded | | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Gray | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 268 / 10.55 mm/inch | | | Width: | 566 / 22.28 mm/inch | | | Depth: | 250 / 9.84 mm/inch | | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
| Installation version with integrated surface mount bracket. The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement. The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.
The ZX1ʼs long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility. The ZX1ʼs molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.
Features:
- Extremely Smooth, Wide Frequency Response
- Attractive, Clean Design with Full Grille
- EV8L 8” High-Output LF Transducer
- DH2005 1” Exit True Compression Driver
- 90° x 50° Coverage Pattern
- Rotatable Horn Design
- Integral Monitor Angle on Enclosure
- 200W Cont., 800W Peak Power Handling
- High Sensitivity, 123 dB Maximum SPL
- Integrated surface mounting bracket
Specifications:
- Sensitivity 1W/1m 94 dB
- Max. SPL / 1m (calc); full space 123 dB
- Coverage (nominal -6dB) H° 90 °
- Coverage (nominal -6dB) V° 50 °
- System Power Handling (continuous/program/peak) 200/400/800 Watts
- Nominal Impedance (Passive) 8 Ohms
- Chassis Size 8 inches
- Weight Net 8.4 kg ( 18.52 lbs )
- Dimensions (HxWxD) 451 x 282 x 263 mm (17.76" x 11.1" x 10.35“)
|
Reviews
There are no reviews yet.